knexpro7575

How did you connect a lift to a white floor that connects to a red rod tower? I'm trying to build something similar to that but I got stuck. :(

What lift should I build from your Ibles? I'm having trouble building both the Industrial and the Inverted helix lift since I don't have a lot of spacers and pieces. What should I do? ( It's because of the way my white floor is designed).

I have always wondered how this lift could fit on a white floor. Max pidgeon did this in his machine, so do you have any idea of how?

How do I fix the elevator? First of all, the counterweight hangs on the wrong side, Second of all, The chain won't switch direction, and Lastly, It goes slow. Can you help me? :(

Could you possibly make instructions for your Double Elevator Lift in Sunrise? I want to use it in my machine. BTW my machine will go around my whole room and I am having trouble with lifts. So could you possibly do that? Thks! -KnexPro7575.

The machine was really loud in the preview video. what motor were you using?

Could you modify it to not separate a ball? I feel like a ball could crack from the fall.

Can you modify the top part so you won't have to use two 12-v motors? I really want to see what would happen if I modified it. Thks! ;) -Knexpro7575

This element is really awesome because it combines a halfpipe and a huge arm which makes it look really nice. Also, why aren't there any image notes in this instructable? Usually, there are image notes in the Instructables that I've looked at. You don't need to do any changes or anything, just wondering. Nice job BTW ;) .

What can I do if I don't a long enough tubing to go around the whole ring? also I got some K'nex for Xmas and I got more y clips. So what shall I do if I run out of them in the process of building this?

Every time I try to click on the videos for each part of the machine, it says, the video is unavailable. Could you fix that? -James. ;)

Can you use the green motor in this lift? I threw out the slow motor since one of the batteries exploded.

I've made a plan in my head of what the spacings between the white connectors would look like. I've decided that if I added 1 one crankshaft, then If I keep on doing 4 spaces throughout the jigsaw, it could run smoothly. Thanks for the inspiring advice. ;)

Can you build this without Y-clips? (It's where the jigsaw connects.) I don't have a lot of Y-clips for how high I'm going to make this. BTW, I'm building a K'nex ball machine and it will be going around my whole room. It will take a few years or possibly a few months to finish and I'll post it here for you to see. Thanks, -James.

Whenever the balls hit each other on the X separator, I said bonk as they hit each other and went left Haha!I'm making a replica of your ball machine and I made a similar plan design and It doesn't look the same since my room's a lot smaller than yours.Also when you had to break the machine down into chunks, I'm guessing it was pretty frustrating when that happened since you put so much work into this incredible machine.Anyway, Congrats on the machine, ;)

and here it is.

I'll make this element but with a different track and cooler dispenser since I'm currently building a ball machine. It'll be like the Nexus by Samuel hunt on Youtube and I'm definitely not creating the same thing since it's so complicated. Anyway, I'll post it after I'm done. Thanks for such a cool dispenser.

how do you make a track under there? I tried doing that and I'm thinking that the track is a blue rods length high and the white floor is about another blue rod length high.

IS it possible if you could use the newer style green motor for this? I have a feeling it will work with that motor in particular.

Can you easily modify the large yellow gears with different gears? like red or yellow? I only have two of the large yellow gears ( one yellow, one black). I just wanted to ask you this so it won't make much of a big deal. Also, I'll be making my K'nex ball machine after I come back from Teen camp since I have to do a lot of preparing. BTW, this arm's the best one of them all (the One from the exception since it adds lots of complexity to it. Thanks -James

The pendulum arm was so big that I thought that Elysium was going to break apart. How did you make the base and everything on that category? I'm saying this because I'll use that idea of yours for a future ball machine. BTW the big elements were the best!

The pendulum arm was so big that I thought Elysium was going to break apart. How did that not happen? How did you build the base and everything on that category? I'm saying this because I'll be using the idea of yours for a future ball machine. BTW the big elements were the best!

Can you use different peices instead of the cross ties? I don't have any of those prices for the arms.

Can you use different peices instead of the cross ties? I don't have the peices for the arms.

How do you make the diagonal white floor and the area where it goes to the yellow lift?It confused me so much XD.

On some tracks near the top of the Citadel, there were some tracks that curved with the small green rods slightly off the yellow connectors. I tried to do it with a blue spacer but it easily came off.

So I watched the depot K'nex ball machine video and that is great. So how did you build the crane lift to it? I tried a few lifts that looked like that but it seemed so complicated that I decided to do normal chain lifts. 2 My next-generation ball machine is on its way to completion and I'm starting with the red towers that I have so I can figure out how I can create some simultaneous tracks and arms that are big and small. 3, How do you turn the yellow connectors when you used some on Citadel? That confused me so much. XD

I could never build something like this XD I will show you my ball machine when I'm done

I watched the video for the flashback and it looks awesome. Of course I will post so me pictures of my ball factory plus the elements thks

Hi Sandro! It's James. I am building a ball machine called the next generation. the reason why I am calling it this is because there will be a lot of big arm elements that I will shortly build. And since I have school break until Monday I could finish this I'll post to you in a few weeks or a few days so I can let you know when I finished it. Hope you like it. BTW like your ball factory, it looks good :)!

How many small wheels and medium wheels are in this element?

This really reminds me of a real buzzsaw that would cut wood I like this element. definitely going to build it today. if I have enough small tyres and white rods. I'll show the I made it picture si you can see it too .thks:)

Hey, shadowman39 it's James. so if I were to build a wall like the Reminiscence ball factory which Tornado96 built, how should I sketch the ball factory? The reason why is because I don't have a lot of pieces and i feel like it won't be successful. so How should I sketch the idea and start building

I almost finished this element but I like this one also I like this zigzag

And what was your favorite element

Wow

I built it. It took awhile but I still did it

I am just going to say this is an awesome ball factory. How long did it take to make this one?

Hey, Sandro! Which element was your favorite in the Elysium and the Eclipse? I watched the video a few times and the creation was awesome! also how long did it take to make these ball factories?

I like this dispenser. I actually built this thing but for some reason, the thing bounces up and down for a few seconds and lets the ball go after a few seconds. why is that?. BTW Following and favorited! :)

do you plan to make any more ball factories? I haven't made anything like that because I feel like I haven't built any yet. what should i do?

How many big and small wheels were in the falling bridge

I like how it is small and easy with three slash four steps. Thanks a lot

how many white connectors did you have in it? and how long did to take build since some elements were huge-ish

This looks pretty easy even though it requires a lot of green rods which I don’t have much of but I will surely build it. And how did you put all the lifts in citadel

Thanks a lot

is citadel still up? how loud is it when your sleeping? i am guessing it would be pretty loud. how many balls did you have in it?

your welcome

that is a lot of pieces holy cow

hey shadowman how could have citadel took three years I really think that would have been a really long time if building. i might buy more pieces and build more. i built the radial maze and at the top, my dad put red pieces instead. thanks for the elements. i also will one day build the next generation ball factory. it will be a good one. bye for now