mertnalb

Mostly used LX200 ATV vehicle perts (wheels, suspension, brake system, top and bottom swings, hubs, rods, etc.).

Thank you !!

Thank you for this brilliant comment Don! We started this project by focusing mostly on the off road issues like can it climb the hill? Or how much torque we should arrange? Actually the speed of buggy was at background just a little, so we never had problem of weight unsprung parts of the buggy. The max speed of the vehicle is not fast enough to be concerned. But i will definitely consider your advice in my future projects !!

Thanks for your interest and good comments. I don't know what are you expecting from your project. Speed or torque? But if you want both i strongly recommend you to use a torque conventer or a multi-forward gear, because the speed will not satisfy you with the engine you have. My goal was high torque and i didn't use any gear system also we did increase the torque by decreasing the speed, with gears connections. Also you can write/ask me for anything. nalbantoglumertcan@gmail.comI bought the parts at a local shop which in Turkey. You can see in the links. http://www.baskentfreze.com/?newUrun=1&Id=893868&C...http://www.baskentfreze.com/?newUrun=1&Id=894006&C...

Thank you for the good comment! We also had a similar experience, my gearbox was cracked last month. But fortunately it was in the warranty cover. Was the reason of your gearbox cracking is, ball bearing? Because mine was it is.