author

nazmo76

Inbox View Profile
37Comments

Tell us about yourself!

  • nazmo76 commented on texstyles's forum topic HELP

    Maybe the machine is waiting for some kind of connection with a PC (thus the computer and sewing machine icons), that's all that come to my mind,I hope it might help

    View Topic »
  • Good news,I ordered a while ago some fittings from ebay to see the quality and stuff, they arrived yesterday and today.It happens that the 1/8" NPT fit nicely into my 1/8" BSPP check valve (same thread and all), also I have an Italy made paint spray gun that has never been used, it happens that the fitting on it is 1/4" (I tested with one 1/4-1/4 fitting I ordered), all of them fit tightly and the males are not too conical, so I think that with teflon tape it will go nicely ^^Anyway thanks for all your advice, I'm going to order all the fittings I need (but before I'll talk to the sellers to ask a discount because I will order around 20 fittings), I come back when I get some results ;)

    View Topic »
  • Sure, but you're lucky living somewhere you have access to the parts directly, I checked the local hardware shop, only metric and expensive fittings available (+ low stocks) so I'll have to buy online Sure about caution, I bought a 120PSI safety valve (+ I have a regulator and a pressure switch on the way, for safety and... comfort :) )

    The pressures will be pretty standard (9 bars max, probably far less), I saw people using (with success) teflon tape + NPT fittings, the part where it comes unhandy is this BSPP Check valve, I searched for infos about the specs but didn't find anything relevant, so maybe I'll order a NPT valve, just to be sureanyway, if anyone has some knowledge about the possible compatibility, I would be really interested ;)

    Ah and also, I'm in France, that's why I'm not familiar with those inches fittings but the Chinese Ebay sellers don't sell tools and fittings in metric...

    View Topic »