organgrinder

oh my!

The best thing to do would be to do some experiments with these and see how it goes. That's how I learned what worked for here. As each climate varies it's hard to know what will work elsewhere :)

Hiya. Yes, it ran off the edge when applied. As it's a doming resin it doesn't hold onto a sharp edge.It is durable after setting but finished resin pieces shouldn't be stored in the sun as this leads to discolouration in the resin (some resin is better than others at not doing this). They are fine to wear in regular daylight but just don't want to be in direct sun for a long time).Good luck with your making!

hiya, Go with the one to remove taste and smell. My partner says the difference is related to how they produce the "active" part of the carbon and the different sized "pores" that make carbon activated and how they remove the impurities in the alcohol :)

hiya You have to make sure that whatever mix of plants you use their conditions are compatible. From the succulents I'm familiar with they want a lot less water/moisture in the air than moss but you could alter how you make it such as not sealing it and spray the moss daily, this means the succulent wouldn't be too wet and I think succulents like open air (not sure on this, I'm not too familiar with them). Ferns work well with the moss in closed terrariums. Good luck!

I've done miniature ones in the bottles that essences or food colour comes in. I used the same method but you have to be very aware of how much you are putting in (remember 1/3 filled, 2/3 air). The best plants are those that like a humid environment and are happy without direct sun. Small ferns are great, begonia's and similar.

Good luck! I bought home a tiny snail in my moss once and he lived for about 4 weeks.