Tell us about yourself!
- rhishabh_raunak commented on krishnachaithanya.movva's instructable Real Time Face Tracking Robot With Arduino and Matlab3 years ago
- rhishabh_raunak enrolled in Robots Class and Electronics Class3 years ago
- rhishabh_raunak completed the lessons Soldering and Getting Started with Electronics in the class Electronics Class3 years ago
- rhishabh_raunak completed the lesson Tools and Supplies in the class Raspberry Pi Class3 years ago
- rhishabh_raunak commented on gowthamkrishnateja's instructable BUILT ON BOLT3 years ago
And I also uploaded the javascript file.
yaah I made changes like this in every lines<button type="button" onclick="digitalCloudMultiWrite([0,1,2,3],[0,1,1,0],D_NAME="BOLT73323");">FORWARD</button>
View Instructable »yaah I made changes like this in every lines<button type="button" onclick="digitalCloudMultiWrite([0,1,2,3],[0,1,1,0],D_NAME="BOLT73323");">FORWARD</button>
- rhishabh_raunak made the instructable BUILT ON BOLT3 years agoView Instructable »
congrats buddy, nice project.but I'm unable to control the robot via cloud. Also instead of motor shield and motors I'm using LED so, I didn't used the 2 pins to enable the motors. I just used 4 pins to control the LED. Please verify the code
- rhishabh_raunak commented on FOX_inovation's instructable SMART HOTEL (BOLT IOT BASED PROJECT) 3 years agoView Instructable »
hey, nice project buddy...can you share the code to this project via cloud ?
- rhishabh_raunak completed the lesson Welcome! in the class Raspberry Pi Class3 years ago
- rhishabh_raunak enrolled in Raspberry Pi Class3 years ago
- rhishabh_raunak commented on kmangalorekar's instructable Internet Controlled Robot using Bolt IoT Platform3 years ago
in the line "<button type="button" onclick="digitalCloudMultiWrite([1,0,3,2],[1,0,1,0],D_NAME);">FORWARD</button>" what does [1,0,3,2] refer to ?also, how will I connect my bolt to normal motor shield ?
View Instructable »in the line FORWARDwhat does [1,0,3,2] refer to ?also, how will I connect my bolt to normal motor shield ?
Nice work buddy...Is the USB cable attached to arduino be replaced by a battery ? Is it used for power supply only or if not how can I make it laptop free ?