Raspberry Pi and ROS (Robotic Operating System)
OV7670 Arduino Camera Sensor Module Framecapture Tutorial
Wavey American Flag From 2x4s
Thank you very much.
Bird Feeder Monitor V2.0View Instructable »
Electronic Magic 8 Ball and Eyeball
Entertainment Center From 1954 TV Cabinet
Entertainment Center From 1...View Instructable »
Download my data.h file, and replace Adafruit's file with mine. Recompile the sketch, and the flame should be right side up.
Thanks Bill. Yes, all of the drawings are SketchUp. I still use SketchUp for illustrations such as this, but prefer to use Fusion 360 for all of my design work these days.
The angle grinder will remove material when the lathe is running in forward or reverse. The Homestead Craftsman was running his lathe in the forward direction, and getting satisfactory results with the King Arthur's Tools 45822 Lancelot 22 tooth cutter. I ran my lathe at ~650 RPM in reverse, which is the speed and direction recommended by Viel (the manufacturer of the cutter). The angle grinder is running at 11,000 RPM (unloaded), which is fast enough to handle either direction.
There was photo in Step 3 (which is less obscure now) that shows the nylon straps and the bolt on the bottom of the assembly. The straps secure the grinder in the cradle assembly, and the bolt firmly fastens the grinder to the base. The bolt prevents the grinder from twisting or moving around on the cradle assembly. The size of the nylon straps could be made larger. Thanks for your comment.
Good points...However, you missed the cover I currently use on the grinder. I moved some photos around in "Step 4: Follower and Depth of Cut Turret Assembly", and it is much easier to spot. I shot most of these photos over a period of three or four years, so most of the photos don't show the cover.
How to Build an Accurate Mechanical Model of the Solar System
Wood Lathe Duplicator With ...View Instructable »
Woodturning Slender SpindlesView Instructable »
ROOM MAPPING Arduino Robot With Unity 3D
"Charlotte's Web" Style LED Filament Clock
Solar Powered WiFi Weather Station V2.0
I originally used PCBWay.com, and had great success and fast service. Recently, they charged me $5 for 10 PCBs plus shipping. You might try https://jlcpcb.com/ they have 10 pcb for $2 plus shipping. Pricing is very competitive these days.
DIY Adjustable Focal Length Fluid Lens
Nice design and more like "My New Flame".
There's a link in the Parts list to Lumiere Candles Inc.. These cylinders are made of a resin plastic with a matte finish. The look and feel of these are very much like real candles. It can worked like cast acrylic plastic, and I found it easy to mill on my CNC. Yes, several of these parts are expensive, especially the 6" H x 3" OD cylinder.I don't have a video of it in a dark room, but the amount of light generated by the LED Candle is comparable to real candle of the same size. The small LED's on the power supply are noticeable through the cylinder in a dark room.
RGB LED Maker Tree
I purchased the lasers at Aliexpress:[https://www.aliexpress.com/item/Red-Line-Laser-Module-5mW-650nm-Focus-Adjustable-Laser-Head-5V-Industrial-Grade/32915484279.html](https://www.aliexpress.com/item/Red-Line-Laser-Module-5mW-650nm-Focus-Adjustable-Laser-Head-5V-Industrial-Grade/32915484279.html)The rocker switch was purchased at Banggood:[https://www.banggood.com/20pcs-250V-3A-Mini-Boat-Rocker-Switch-2-Pin-Plastic-Button-ONOff-SPST-p-1044250.html](https://www.banggood.com/20pcs-250V-3A-Mini-Boat-Rocker-Switch-2-Pin-Plastic-Button-ONOff-SPST-p-1044250.html)
Clapper LED Candle
Clapper LED CandleView Instructable »
Thanks! I used Fusion 360.
The first step of the calibration procedure is to align the Laser line vertically for each laser. As a result, the Laser Guides are good for all levels of the Drill Press Table.
I've added an image to Step #5 which illustrates the principle of operation. The cross-hairs will indicate where the drill bit will contact the work piece regardless of the table height. As seen in the illustration, the laser lines form two vertically aligned intersecting planes where the intersection corresponds to the center line of the drill chuck.
The first calibration of the lasers is to align each laser lines (planes) vertically. The next step is to intersect these lines (planes) to the center line of the drill tip. These vertical intersecting planes (lines) are in the same spot regardless of the table height or distance from the chuck.It's hard to beat how well this makes drilling holes with Forstner Bits (or other large tool) when the bit obscures the spot to drill.
Absolutely, you can use any circuitry you wish to supplying 5 VDC to the lasers. I used the PowerBoost voltage regulator to boost my 3.7 VDC Li-Ion rechargeable battery to a 5 VDC output. The PowerBoost also provided low battery protection for Li-Ion battery. Your suggestion a 5 VDC cell phone charger is a simple and great idea.
Drill Press Laser Guide
Digital Vacuum Regulator
Make an Adjustable-Height Table With a Car Jack
I purchase resistors, transistors, capacitors, inductors and LED assorted kits for a few dollars from ebay, aliexpress, banggood or amazon. For specialty items, I go to Digi-Key.
Drill Press Laser GuideView Instructable »
Garden Monitor & Control System Using Intel Edison, Node-Red & Twilio
ECG Using Intel Edison and Plotly
I apologize for the error. The "from ListSelector import ListSelector" line should be removed from vac_sensor.py. Either manually remove the line, or download the edited version of vac_sensor.py from above.Merry Christmas
Also, you need to do the following:sudo apt-get install python-smbus python3-smbus python-dev python3-dev python-numpy
Remote CNC Stop and Monitor
Remote CNC Stop and MonitorView Instructable »
Digital Vacuum RegulatorView Instructable »
Bird Feeder Monitor
If you refer to Figure #2 Part B, I glued a 20-22mm thick piece of rubber between the two adapter plates (A and C) as a shock absorber between the sliding plate (#108 in Figure #1), which the upper wheel is attached to, and the load-cell.This model bandsaw has a brush to remove saw dust from each wheel, therefore, I haven't noticed any significant changes in force while the saw is in operation. Thanks for asking.
Digital Bandsaw Blade Tension Gauge
Digital Bandsaw Blade Tensi...View Instructable »
The UNO will not work. The YUN has Linux and WIFI, which are both required for this project.