scitronboy's instructables
Achievements
- scitronboy commented on cah6's instructable DIY EEG (and ECG) Circuit
- scitronboy commented on cah6's instructable DIY EEG (and ECG) CircuitView Instructable »
Change your audio settings so that it gets input from the audio jack instead of the speakers
- scitronboy commented on millerman4487's instructable Etch a Sketch JoystickView Instructable »
Wow! That sure would make etch-a-sketching a whole lot easier!
- scitronboy commented on TechKiwiGadgets's instructable LED 3D Printer Bed Leveling ToolView Instructable »
If I end up remixing or modifying the design I'll post a link so you can look at it.
- scitronboy commented on AdventuresInJunkLand's instructable Fix Up an Old Laptop!View Instructable »
I recently updated a macbook from even earlier. My macbook was one of the last models to use a certain CPU, which made it extremely difficult to install linux on it. I ended up installing Debian alongside Mac OS. Since you have a much newer model than mine was, it should be much easier for you. Let me know if you want more details about mu experience installing Debian Linux on my old macbook.
- scitronboy commented on TechKiwiGadgets's instructable LED 3D Printer Bed Leveling ToolView Instructable »
Thanks! However I don't like the external power bank setup; it would be so much easier to just wire it to the printers power supply. But that is easily fixed.
- scitronboy's instructable Treasure Chest Puzzle's weekly stats:
98 views1 favorites0 comments
- scitronboy entered Treasure Chest Puzzle in the Puzzle Challenge contest
- scitronboy posted an instructable Treasure Chest Puzzle
- scitronboy commented on H4I2's instructable Melting Cube Dove-tail PuzzleView Instructable »
Wow, thanks! That would make my modeling life a whole lot easier! I didn't even know there was an OFFSET command (I have just done it manually, which is annoying)!
- scitronboy commented on Random_Canadian's instructable This Is a Hidden Maze Puzzle!View Instructable »
Search for "online 3d printing service"
- scitronboy commented on H4I2's instructable Melting Cube Dove-tail PuzzleView Instructable »
The only problem with this is that there are no modeled tolerances so if you print this you might not be able to fit the pieces together without a lot of sanding.
- scitronboy commented on kDeep's instructable Electronics Puzzle Circuit.View Instructable »
May I suggest that you take a picture with the cover on and one LED on?
- scitronboy commented on Hermooz's instructable Three-dimensional Lego Labyrinth PuzzleView Instructable »
"Getting a chance to submit it to not just one but two separate contest was surely a good motivation, too..." I didn't know you were allowed to do this? Is that a special exception for the First Time Author contest???
- scitronboy followed nqtronix
- By nqtronix
- scitronboy followed energy channel
- scitronboy commented on TheTNR's instructable TRIPLE CNC MACHINEView Instructable »
Is $100 the cost for all new parts? If so, that's an amazing price...
- scitronboy followed Mark Rehorst
- By Mark Rehorst
- scitronboy followed 3D-Printing, office-supplies, lasers, computers and 3 others channel
- scitronboy commented on fkirita's instructable LightBlue 3DView Instructable »
Yes, that would be very helpful fkirita!
- scitronboy favorited LightBlue 3D by fkirita
- scitronboy commented on Kink Jarfold's instructable DIYer HALLOWEEN COSTUMEView Instructable »
Really? By now, it must be 9,786...
- scitronboy commented on Kink Jarfold's instructable DIYer HALLOWEEN COSTUMEView Instructable »
Have you tested, like, 300 different people already to see how fast they can make them?
- scitronboy commented on DIYmechanics's instructable DIY RELAY MODULEView Instructable »
Why don't you look up how a relay works and then you might understand. J1 is the gates of the relay and J2 is for the power and signal.
- scitronboy followed scitronboy
- By scitronboy
- scitronboy commented on MatthewW147's instructable Scarecrow MaskView Instructable »
This is cool!
- scitronboy favorited Purgatory by 69valentine
- scitronboy followed clocks, science, robots, electric-vehicles and 9 others channel
- scitronboy commented on scitronboy's instructable Scary, Motion-sensing, Moving, Halloween SkullView Instructable »
Thanks!
- scitronboy commented on StewieWorks's instructable DIY Halloween Gore Bags and Skulls on a Pike Decor
- scitronboy commented on JadenI's instructable Cut in Half Halloween CostumeView Instructable »
This is almost an exact copy of https://www.instructables.com/Man-Cut-in-Half-Costume/
- Show More Activities
cah6, you REALLY need to add a disclaimer that says you are not responsible for people electrocuting their skulls with this device. Like this:http://openeeg.sourceforge.net/doc/WARNING.htmlThanks for the awesome instructable anyway! This would be really cool to build.