Tell us about yourself!
i've also try to add an Oled Display on the NodeMcu to show the Micro Level input and the Number of clients connected but it seems to be to eavy for the cpu and it didn't react very well after trying it. U8G2Lib seems to be more liter then Oled Library but doesn't work well to. It is also maybe i'm writting a code that call the oled screen to many times in the void loop.
Thinks a lot in responding :) It works now after having restarting from scratch about 10 times ! i'm working now to adjust the input level because it'is depending a lot of the "master box" location. i've also add 2 bouttons (1 for + and 1 for -) on the slave to slide the "mic" low and high value. it ' s the only way that i've found to adjust the "led volume"thanks again for this project
Hi and thanks a lot for this EXCELLENT project.I'm just havinga little trouble.the connectionis OK between my NodeMCU (master) and the Wemos (slave). I added a “print”and the wemos detects the change of the button.By cons, I haveno blue or green led to the connection ... and the LEDs do not light. I testedD2 and D4, for the D-IN led, but nothing n done.How is itpossible to verify that the microphone send well a value in case it would comefrom the input ... and not from the output The wemos serial show in loop : Sending heartbeatReturned: 8, also sizeof hbm: 8Thanks Again
Hi, Thanks a lot for this project !!! Very Nice i've make it on a "practice pinboard" and it was working fine yesterday. i've bind my Taranis with an Eachine H8 ... But only One Time ! May be a chance to find the correct Binding way / Config... but today i'm still trying to bind it again but don't success in :( Does someone can explain me again how to bind cos i'm surely in a wrong way !!!thinks