woodenProjects

Thanks. It's really simple.

Thank You :)

bum ! :)

Hm.. adding motor isn't the good idea. My wife will not only say it's stupid but also dangerous ;-)

wow, thank You :)

thanks ;-)

be careful what YOu wish ;-) it's a exausting excersise to row a boat... I mean row a sled ;-)

Thank You:)And it is easy to make ;)

This is amazing. Real voice of Edison. I had problems with understaing some words, but the record quality is astonishing considering it when it was recorded.Thanks for the link.

Thanks :)

Thanks.

Thanks. If You will try so... be patient.. be patient my friend. It takes a lot of nerves when You tear the many, many aluminum foil ;-)

no, but it seems like good idea. I saw the guy on youtube which tries to record on plastic cup but says that it's not working very good.

In fact I don't know. Adjusting my needle took me a lot of time in fact.But if You google there are at least 3 pdf's about the topic on internet and few quite good videos on youtube. In one of them some young person even managed to record using plastic cup with the needle attached.

Yes I agree about the origins of technology. I like such raw projects.

You welcome:)You should try but... You have to be patient, believe me. It is frustrating when the needle tears You the foil when it is not very good adjusted. I think that precision (which in my case wasn't the priority) meters a lot :)

not very hard. look at my others instructables. I've made electric car there.in basic You will need:- engine- batteries- controller- gas pedal

this is freecad. But hm.. it's not very intuitive software. I think You could find better on internet.

no no. I use the wheel hub. It can be seen on the video where I'm unpacking the parts. I bought wheel hub from chineese ATV/QUad. Not expensive.

not very fast. This is toy car. 20mph.but You can always put a bigger engine. It is a room for that, although I won't recommend to do that with childrens

thanks

no problem:) It is hard to build the go kart with exact same parts. You build from what You get.

this is difficult. You won't get the exactly same parts.start from buying rear axle - this is the hardest to find. And then search for the rest.

Thanks. It really gives a lot of fun for both: me as a constructor and kids to drive :)

it is in the text. depends from sprocket teeht, wheel size and an engine rpm. Currently engine is still with governor (which can be removed) and it gives about 32 kmh

this is not the best idea in my opinion.- the efficiency is poor, You have to wait several hours (on forums people say that from 4 up to 7). In my project it takes only 30-60 minutes- You have open fire which is not good when the kids are in the Garden- You have the complicated design (how to drill in thick steel, how to secure it from water etc)

Yes there are hot spots, but water quickly takes the hot from them.If You put very big fire it's impossible to seat on it. Then I'm using the sit made from sponge pillow.

filling - with the water from garden pipe/sneak (i dont know exact word in english)empting - with an outflow on the bottom of one wall

Greetings for Bosna from Poland then ;-)I'm also counting to have bath in a winter in this.

Yes it is difficult. Not the cleaning, because i have a small shovel with long stick, but making the fire.. You need to fire it on Your knees. But You know, this is not so bad.

this was my inspiration

no no, it's not that bad as You are thinking.First of all I'm making the fire first, wait till the fire is gone and then taking the bath.The water is hot pretty long time, because the special oven-keeeping-heat-bricks are still heating the water, but not so hard as the fire.But I admin, I have a bath few times with still a fire underneath and one time it was so hot,that I need to seat on a sponge ;-)

ah.. It's not shown pretty good on my pictures. Sorry. The tub has typical water outflow which, when open let the water through the special hole at the bottom of the wall. It can be see on the photos/video.

This looks more raw, but still working:)

thank You :)

Thank You :)

thanks

;-)I'm planning to make some custom handles just to make sure that nobody will pour something what he/she don't want