Introduction: My Knex M16.

By

here it is, my knex m16.
I hope you like it.
if you have any questions just ask them.
:)

check out my new can dispencer !
https://www.instructables.com/id/knex-can-dispencer/
and the video https://www.instructables.com/id/knex-can-dispencer-1/

What do you need

Connectors:
Yellow-131
Green-29
White-35
Orange-63
Single grey-34
Double grey-8
Red-67

Rods:
Yellow-18
Grey-16
White-60
Green-app. 200
Red-7

Other things:
Y connector-11
Tan 'things'-45
Grey rings-14
Blue rings-9

Step 1: The Handle.

I hope the pictures are clear enough.
if you have any questions, just ask them.

Step 2: The Stock.

I hope the pictures are clear enough.
if you have any questions, just ask them.

Step 3: The Fire´thing´

I hope the pictures are clear enough.
if you have any questions, just ask them.

Step 4: The Top/handle ´thing´

I hope the pictures are clear enough.
if you have any questions, just ask them.

Step 5: The Magazine.

I hope the pictures are clear enough.
if you have any questions, just ask them.

Step 6: The Barrel.

I hope the pictures are clear enough.
if you have any questions, just ask them.
it is a little hard to get it all in place.

Step 7: The Ram and the Magazine ´thing´

I hope the pictures are clear enough.
if you have any questions, just ask them.

Step 8: Put It Alltogheter.

I hope the pictures are clear enough.
if you have any questions, just ask them.

Step 9: Add the Rubberbands.

I hope the pictures are clear enough.
if you have any questions, just ask them.