yea this is my first Instructable so no cussing(please) and I tried my best to provide you with these pics. This will tell you how to take the whole barrel out of a nerf maverick and be able to put it back in while gun is fully assembled

Step 1: Vids to Help

some stuff to help on this project

part2

his user is uin13 on youtube he does mods on nerf guns.

I saw this and did it as an Instructable because no one had done it. so I decided to show you guys, and I also did this a little differently in my Instructable.

Step 2: Disassemble

please take apart your gun

Step 3: Cutting

cut the following (they are shaded for your convence)
yea when i did this it was with a knife(very hard dont do this with a knife)

Step 4: More Cutting

yea you need to cut these

Step 5: Reassemble

reassemble the gun without the barrel in it and you should be fine to put the barrel in just pop it in where its supposed to go. now it should look like it did before you did this

thanks for taking your time to look at this

oh and if you want to do this a different way just cut both gray pieces off the barrel