Nice Hanger for Pictures That Are Not to Big and Are Light!
Intro: Nice Hanger for Pictures That Are Not to Big and Are Light!
well this instruct-able is on making pop can tops hang you pictures.
if your picture falls it is not my fault at all you tried the instruct-able.
if your picture falls it is not my fault at all you tried the instruct-able.
STEP 1: Things You Will Need.
-2,pop,soda,cola cans....
-a drill or to cut a hole.....drill bits from 1/16 to a max of 3/32
-some hands to bend the pop tops
-a drill or to cut a hole.....drill bits from 1/16 to a max of 3/32
-some hands to bend the pop tops
STEP 2: Bending
start by bending the pop top. see picture
STEP 3: Drill
drill the hole. see the pic below.
btw it is hard to take a pic of the pop top already bent and drilled but it is suppose to be bent to.
btw it is hard to take a pic of the pop top already bent and drilled but it is suppose to be bent to.
STEP 4: Some Other Stuff You Can Do
you can glue the 2 pop can tops together but i did not do this.
fluffy likes the other options don't you.
fluffy likes the other options don't you.
STEP 5: Done Now You Can Hang You Picures
sorry for picks i took with my phone. that all i have.