Pocket Rockets
Intro: Pocket Rockets
A altoids tin rocket station that is a blast of fun
tools:
plyers
supplies:
needle
altoids tin
book matches
tin foil
lighter
tools:
plyers
supplies:
needle
altoids tin
book matches
tin foil
lighter
STEP 1:
use your plyers to remove this silver thing but dont throw it away it will be the launch pad
STEP 2:
lay a small strip of tin foal on the surface that you are building this on and then put a match on it so the match head is on the tin foal and then put the needle in top of the match so it looks like the picture and then fold the foil over the whole thing and make sure it is very tight and when you do all of that poll out the needle and where you pulled out the needle that will be the thruster
STEP 3:
stick the rocket in the launcher and light it
STEP 4:
packing your kit is tricky so i took some pictures
9 Comments
ParaGunner1324 10 years ago
curious youth 12 years ago
KwartzKitten 13 years ago
korgoth25 13 years ago
___ 14 years ago
___ 14 years ago
knuckel 14 years ago
superspacemonkeyz 14 years ago
___ 14 years ago