Safety Goggles Modification (SGM)
Intro: Safety Goggles Modification (SGM)
This instructable will show you how to place a flashlight on safety goggles so you won't have to hold a flashlight when you have to do something with two hands. This is meant to be an on-the-field modification, as with the name.
This is also known as the SGI (Safety Goggles Illuminator).
Don't forget to rate!
This is also known as the SGI (Safety Goggles Illuminator).
Don't forget to rate!
STEP 1: Materials
You'll need :
-tape, as said in the previous version, electrical tape will do best for this
-LED flashlight, I recommend using high power LED's, I bought high power flashlight for USD 60 cents. It is extremely light, and is a good shine per buck flashlight.
Tools:
-scissors
-tape, as said in the previous version, electrical tape will do best for this
-LED flashlight, I recommend using high power LED's, I bought high power flashlight for USD 60 cents. It is extremely light, and is a good shine per buck flashlight.
Tools:
-scissors
STEP 2: In the Making
Cut 2 lengths of tape of the same length. Tape at the positions shown in the image, and that's it.
STEP 3: Operation
Now to use this just wear and turn on the flashlight
This must be the simplest instructable I made so far. Really, look at my other i'bles.
This must be the simplest instructable I made so far. Really, look at my other i'bles.
5 Comments
Hycro 13 years ago
beehard44 14 years ago
Yes, HO****, do not drop your frickin SLEDGEH***** on MY foot or else, ill make a fricin' NERD gun that fires mixtures of KNO3 and sugar in your nuts with an attached "nutcracker" rocket or maybe a few class IV/4 lasers (those ones that go up for more than 1 watt, can burn your skin and is not a nutcracker, more of a nut vaporizer.....)
dont dare do this thing, coz nobody likes roasted nuts....
nutsandbolts_64 14 years ago
ert 14 years ago
nutsandbolts_64 14 years ago