Simplest Steam Engine
Intro: Simplest Steam Engine
Hello everyone this is my first steam engine made using very simple parts like cardboard, disposable syringe, straw, pen end caps and bicycle spokes. Cannot hold the breadth for longer time.
How much economical can you make your engine? Here it is costs only about Rs.10. Blowed air through mouth thats why produces lower rpm use compressor(i dont have one) iam sure it will give good results. Hope you all like my engine and video. Took nearly 20minutes to make the engine.
How much economical can you make your engine? Here it is costs only about Rs.10. Blowed air through mouth thats why produces lower rpm use compressor(i dont have one) iam sure it will give good results. Hope you all like my engine and video. Took nearly 20minutes to make the engine.
21 Comments
T0BY 8 years ago
ganuganu 8 years ago
Thank you...
teknohawk 8 years ago
ganuganu 8 years ago
The bolt acts as the supporting part for the cylinder. This is an oscillating engine.
teknohawk 8 years ago
mbecks 10 years ago
ganuganu 10 years ago
Yes exactly
mbecks 10 years ago
great thanks now to find my supplies and build. I also have small electric motors, which i want to hook the shaft up to the fly wheel and see if it can be used in reverse as a small alternator. see if it can be used to charge phones ect.
ganuganu 10 years ago
If you get your cell phone charged please call me ill be happy.. Just kidding.. Have fun in building one and dont forget to upload the video.
mbecks 10 years ago
I will post it for sure. hopefully it works.
remal 11 years ago
ganuganu 11 years ago
LiftAndLove 11 years ago
heathbar64 12 years ago
ganuganu 12 years ago
heathbar64 11 years ago
ganuganu 11 years ago
heathbar64 11 years ago
ganuganu 11 years ago
http://imageshack.us/photo/my-images/850/220pxoscillatingcylinde.png/
blkhawk 12 years ago