Primed .22 cases?

Would the primer go off on a .22 case that has had the bullet and powder removed if you shot it with a 900 fps .177 lead pellet? Also, would it go off if shot from a slingshot at a brick wall.

Asked by LiquidLightning 7 years ago | last reply 2 years ago

Inatall larger wheel on bike

What do I need to do above

Posted by doogg1 5 years ago

can i make homemade .22 blank gun?

I am making a small gun for a R/C tank i am building. i want it to shoot .22 rim-fire blanks too make it well...awesome. is there any way i can do this with materials such as aluminum or copper? or does this have to be made from steel to keep the pressures from breaking the gun. also, is the force from a blank the same force as a regular bullet.

Asked by myakka 5 years ago | last reply 5 years ago

Instructable rated up to 5.22!!!

There are some strange things going on on instructables...4 Knex instructables are the highest rated instructables ever...And one has ratings over 5 - 5.22, and that instructable belongs to: I_am_CanadianWhat is going on?!?

Posted by Plasmana 10 years ago | last reply 10 years ago

Ideas Please

Help! I have got a whole lot of 0.22" bullet cartridges (i do small bore) and i need an idea for an instructable on them. And by lots i mean unlimited. Seriously

Posted by duck-lemon 10 years ago | last reply 10 years ago

I built a gun.

Over the summer, I designed and built an extremely simple single-shot .22 pistol. Below is a video showing all of the parts and the first shots fired. I did this as a design exercise and to see how hard it would be to build a reliable firearm, going from idea to 3D model to working prototype in about three weeks. So far I've fired over 200 rounds with 0 malfunctions, however some parts still need to be heat treated and I need to apply a finish and maybe add some sights. When it's completely finished, I'll port my blog posts into an instructable. 

Posted by JamesRPatrick 4 years ago | last reply 4 years ago

is this led array right?

+18V + -|>|- -|>|- -|>|- -|>|- -|>|- -/\/\/\- + R = 22 ohms + -|>|- -|>|- -|>|- -|>|- -|>|- -/\/\/\- + R = 22 ohms + -|>|- -|>|- -|>|- -|>|- -|>|- -/\/\/\- + R = 22 ohms + -|>|- -|>|- -|>|- -|>|- -|>|- -/\/\/\- + R = 22 ohms + -|>|- -|>|- -|>|- -|>|- -|>|- -/\/\/\- + R = 22 ohms this lay out has the resistor on the negative side is this right many thanks for helping karl

Asked by kturner6 4 years ago | last reply 4 years ago

Metal Clip/Mag for Remington Nylon 77?

I have a Remington Nylon 77 and I ordered a clip from a local gunshop, this clip was plastic and after a years use will not hold the bullets in, (if I put in more than 1 bullet they pop right back out)

Asked by oldanvilyoungsmith 9 years ago | last reply 9 years ago

"Port 22: Connection refused" using "ssh" remote access on Mac OS X ?

I'm using Mac OS X 10.6.4, along with a couple of other people on the same network. I have a firewall set up on my computer While I am able to connect to most people remotely, using the command (in terminal) ssh [username]@[IP address] (I get the IP address by pinging the computer name) There are a couple of people where I come across the message of: "Port 22: Connection refused"   (or something along those lines) Anyone know what's happening? Cos I'm clueless..... I've tried to see if removing the known hosts files changes anything, but it doesn't. I have no idea as to whether those people have firewalls set up or something Is there another port that could be used here or something (23 maybe..? I heard...?)

Asked by .Unknown. 7 years ago | last reply 7 years ago

What air rifle is this?

Okay. Went to Big 5 Sporting Goods today and picked up an air rifle for 90 bucks. The box says "RS1 Air Rifle Combo", combo meaning scoped, however there is no indication on the box of a second barrel, which should be included to be able to shoot .22 pellets as well as .177. However, once I unboxed, I looked at the receiver and engraved in is "Sportsman RS2 Series", which should be a different rifle, which should also have a second barrel. The second barrel was not there. The manufacturer is Beeman. Can anyone tell me whats up with this?

Asked by LiquidLightning 7 years ago | last reply 7 years ago

what is the capacitor code?

I have a green capacitor that has the code, .22k 100sc What is the value in uf?

Asked by madman11 9 years ago | last reply 9 years ago

What is the best youth calibur revolver that has low cost? 500>? Answered

What is the best youth calibur revolver, (So basically lower than .357, I dont care about power much, as long as it can kill a squirrel or rabit, cleanly, and it has little recoil.) and is mainly less than 500 dollars. I've been looking at the .22 (Ruger?) Single Six, (Thats the actuall name, look it up.) revolver. Also, was anyone else but me REALLY friggen suprised there is a .17 calibur? I might loose that under a microsope... my gad, that must be reeeeaaaaaaaallllllllyy small. Like the the size of this "O" in quotes... wow...

Asked by PKTraceur 9 years ago | last reply 8 years ago

Trying to use relays with a electronic momentary to latching converter. Relays are tripping the latching converter?

I am trying to use this devise,   to turn on a relay attached to a positive wire from a blinker can that sends the signal to the corresponding light. I have two in parallel so I can turn on and off a LH and a RH light with a momentary switch. (can't use a regular on off switch). It works perfectly when attached to its own power supply. I am using this in on a 12 volt system that has some other relays running various things in the system. when I hook this into the system, even directly from the battery, activating the other relays turns the relays on attached to this devise. I suspect it to be noise since it works great on its own power supply. I Tried running the power lead through a resistor and capacitor to help isolate the loop but didn't work. This is stretching my understanding of electricity. What I think I am looking for is how to wire this to isolate it's power +/- circuit from the rest of the system. Otherwise suggestions on how to trouble shoot. I know it is best to add a diagram but I don't know how to make one.

Asked by msumrell 1 year ago | last reply 1 year ago

Refrigerant r-22 tank

I have acces to a lot of r-22 tanks already empty.  What can i do with them? Are this things safe for making a grill or to cook inside  of them? Proper recycling is not an option since no one in this country do that. 

Posted by ElmoRoyD 7 years ago

Avr Dragon and Arduino 0022?

I just got my new avr dragon from atmel and i was wondering if anyone had a programmers.txt file i could have that include the dragon i dont know enough to write my own for it but i thought id ask the community.

Asked by hightekrednek2396 7 years ago

What is this website: Dungmusic . Answered

I googled my email address today and the top entry was this: 09/05/2011 05:09:07 Outgoing Emailer Started09/05/2011 05:09:16 ... ...... 06:09:53 Successfully sent:(1955) MY EMAIL ... I searched for this company but every site seems to be just pages of this type of thing: hiphophanger@gmail.com09/14/2011 22:09:25 Successfully sent:(964) 22:09:25 Trying to send:(965) 22:09:25 Successfully sent:(965) 22:09:25 Trying to send:(966) flanaganpaddy1@hotmail.com09/14/2011 22:09:25 Successfully sent:(966) 22:09:25 Trying to send:(967) 22:09:25 Successfully sent:(967) 22:09:25 Trying to send:(968) debiatfinalphase@msn.com09/14/2011 22:09:25 Successfully sent:(968) 22:09:25 Trying to send:(969) 22:09:25 Successfully sent:(969) 22:09:25 Trying to send:(970) 22:09:25 Successfully sent:(970) 22:09:25 Trying to send:(971) scobling1979@hotmail.com09/14/2011 22:09:25 Successfully sent:(971) 22:09:25 Trying to send:(972) 22:09:26 Successfully sent:(972) 22:09:26 Trying to send:(973) s I'm just curious: what is it? Thanks.

Asked by FriendOfHumanity 7 years ago | last reply 7 years ago

Henry .22

Hello, folks! I have been thinking about buying a Henry lever action .22 rifle, and I was wondering if any of you guys have owned any Henry products, and if you have, what did you think of them? I would appreciate any feedback. :D  

Posted by CorgiCritter 3 years ago | last reply 1 year ago

22 Manly Ways to Reuse an Altoids Tin

Guess where most of these are... There are some good tins not on this site too. L

Posted by lemonie 7 years ago | last reply 7 years ago

Ramset .22 Caliber ?

I've just walked by Home depot today and I saw these things that looked a lot like ammo, I took a look at it, it said "Ramset .22 Cal, Keep away from childreen, heat ,shock,etc,etc,etc, somthing about powder tools. Apppearantly it was for a nailer. So I just just had a question, how do you use it, and can it be used in firearms (such as a zip gun) that accepts .22 caliber cartriges?

Posted by IlluminatedAntichrist 11 years ago | last reply 6 years ago

What is a 22 AWG Electrical Wire and how does it work?

Please put this in an easy to understand way. I'm doing a physics project in school and this in on my research doc.

Asked by EmmyS2 2 years ago | last reply 2 years ago

How long can USB connection go through 22 AWG wires?

How far can a USB webcam be when using 22 AWG 4 wire cable for the USB connection?

Asked by poiihy 2 years ago | last reply 2 years ago

Trying to repair micronta 22-164

I have a micronta talking multi meter 22-164 and after I put fresh batteries in it it keeps saying replace batteries. I found out other people have the same problem. 

Posted by tim4 4 years ago | last reply 3 years ago

Is regular 22 gauge steel wire okay to make earring findings out of? Answered

I am currently using blackspur 22 gauge steel wire to make earring findings but I am worried it could be harmful. Please help? Is this okay to use? No one has yet wore these

Asked by The Science Guy 6 years ago | last reply 6 years ago

Where can i get a piece of .22 (5.5mm) pipe??

I really need some have any idea where from?

Asked by highvoltageguy 6 years ago | last reply 2 years ago

Will .22 lead slugs work in a ball mill in place of ball bearings?

I'm making a ball mill but am having trouble acquiring lead ball bearings.

Asked by WareOuttaHair 8 years ago | last reply 8 years ago

"mode not supported" message on MAG 22" monitor when connected to Dish Network box with HDMI to DVI cable?

When this happens no monitor buttons have any effect.

Asked by cadiman67 8 years ago | last reply 8 years ago

knex aircraft f-22 raptor R.A.F

Ok then where shall i start , i have recently started to take an intrest in to model aircraft ,not R.C but knex aircraft my liking at the moment is as you may guess the f-22 lockheed raptor. i am currently working on this and may be posted . but i wondered if anyone would participate in building and posting model aircraft.

Posted by gibbo_gunner2496 11 years ago | last reply 9 years ago

Storm 22_ V2 vote!

Hi guys! I am holding a vote to say which one of my four so far storm rifles or storm 22 pistol I should upgrade to a revised V2! Just vote, closing date is November 1st!Vote countStorm 220Storm 221Storm 222Storm 223Storm 22

Posted by The Jamalam 10 years ago | last reply 9 years ago

how do i fix my Toro 22 In. Variable Speed Self-Propelled Recycler High Wheel Mower Model # 20331?

If u need more info leave comment.

Asked by clancy1990 8 years ago | last reply 8 years ago


From 22s to m1s.snipers to bazookas.just pick your favorite gun.mines the bazooka

Posted by nfk11 8 years ago | last reply 7 years ago

how to restore a 2*2 rubix cube?

Asked by goneholidays 3 years ago | last reply 3 years ago

Need to know if i can replace a 22 ohm /10% (1.5w ((I think due to size)) resistor with a 22 ohm / 2% 2watt.

The resistor placement is R2 in a Behringer B215D powered PA speaker. The resistor that was in it is smaller round than the replacement piece,but is the same length. The schematic does not state the wattage of the resistor so I'm a little confused. Any help would be greatly appreciated.  

Asked by hal.jensen.9 4 years ago | last reply 4 years ago

What to do with these bullets? Answered

In a tool box in my basement, I found some old Remington .22 bullets. What should I do with them besides shooting them or giving them to the police? Any Ideas, Thanks.

Asked by Thelonelysandwitch 9 years ago | last reply 7 years ago

2 to the 2 to the 22 power

I recently took the pamel (pennsylvania math league test thing) and for one of the questions it said: rearrange the numbers 2 in anyway with mathmatical symbols to get the highest number possible. I though the answer was 2 to the 222 power The answer was 2 to the 2 to the 22 power Is this correct? I thought that you would multiply the powers to get 2 to the 44 power, now have the power to the power and get 2 to the 4194304 power.

Posted by guyfrom7up 11 years ago | last reply 11 years ago

Make:SF - June 22 @ Instructables

Make:SF will be hosting their next meeting here at Instructables World HQ. This will happen on Sunday June 22 at 2PM.The meeting will be held at:489 Clementina St - 3rd FloorSan Francisco, CAFor those that don't know, Make: SF is a local group of Bay Area makers inspired by Make Magazine. All are welcome to attend.Also, their next TechShop Meeting will be on July 6th. Sign up for the Meetup Group to be informed of all future meetings and events.

Posted by randofo 10 years ago | last reply 10 years ago

What component is this?

I have many of these components, all different sizes. they always have Numbers and letters on them. this one says .22K 100SC It is green. what is it? thanks

Asked by madman11 9 years ago | last reply 9 years ago

Generate 22-30 volts from 12

I need to generate a voltage between 22 and 30 (for vfd tubes) from 12 volts (DC). It also has to have a minimum current output of 60mA (really 54, but I like to have some leeway). I really want to use something without an inductor (charge pump?) because I'm also driving nixies in the same area and I already have a lot going on. I would love to have something similar to the ICL7662 (essentially a voltage doubler, only uses a chip, 2 caps, and 2 diodes), but as far as I can tell it can't deliver enough power. I can't find any chip that's what I want... Help?

Posted by guyfrom7up 9 years ago | last reply 9 years ago

Will 22 volt solar panel hurt my marine 12volt battery?

 I bought a small solar panel to charge a marine 12volt battery, but when I checked the voltage of the panel in the sun  it read 21 - 24 volts - will that hurt my battery?

Asked by mtlt 8 years ago | last reply 8 months ago

I was wondering if its possible to make a silencer for a .22 rifle from stuuf found around the house?

I know that there are ways to make silencers for different guns, but i've never seen or even heard of one made for a .22 rifle. I was wondering if its possible to make one ?

Asked by friskybluejay 9 years ago | last reply 8 years ago

Shoot .177 ~ .22 cal. pellets from a paintball gun?

I want to be able to shoot .177 or .22 caliber pellets from my Co2 powered paintball gun (single shot or semi-auto, I don't care ). Is this even possible to do without costing a small fortune?  If you have seen the clip on "You Tube" regarding the Castleman's  Air powered .30 cal machine gun you would kind of see what I'm after in a sense.  Any info. or links to the info. would be appreciated. 

Asked by McGuyver_09 9 years ago | last reply 6 years ago

Meteor Shower in late April

Upcoming shower:Day: April 21 - 22Constilation/type: LyridsFrequency: 16 - 30 per hourIllumination: 5.4%For the meteor shower calender, check out these site I found: These are not my sitesNotice this also: Some info ranges, but the dates stay april 21 - 22 (Or just 22)

Posted by Flumpkins 9 years ago

The Blaster rifle request!

Hey can somebody make an E-11 Blaster Rifle (a StormTrooper's Gun) and could you post it?

Posted by SonicX 22 9 years ago | last reply 8 years ago


Judging for the 3-D ornament contest ended 11/14.  Its 11/22.  When will the winners be selected?

Posted by sfauer 4 years ago | last reply 4 years ago

i have a school project ?

To do this wenseday and i am looking for a easy but interesting projects for 22 5 grade students any ideas anyones?

Asked by efilteau 9 years ago | last reply 9 years ago

favorite connectors?

I was wondering if anyone had any favorites for 1 or 2 wire (electrical) connectors that are easy-to-connect/disconnect with a minimum amount of force. I'm thinking around the 22 AWG range. Thanks!

Posted by sloan2 11 years ago | last reply 11 years ago

Steampunk ideas for us "big" girls?

I'm not a size 12.  More like an 18 on bottom and a 22 on top.  Any ideas for steampunk accessories/fashions for women my size?

Asked by tallysplace 9 years ago | last reply 6 years ago