BMX kaufen günstig

BMX kaufen günstig

Posted by RichardMarcotte 6 years ago


does anyone know a place were they paint bmx bikes?

I need to know if anyone knows any place were they  paint  bikes.

Asked by build52 7 years ago | last reply 7 years ago


Hi, im starting a project withg a young lad that i work with. we are putting a mini moto engine to a bmx frame

And wondering if anyone could throw us some ideas as it would be very appreciated! thanx, wes.?

Asked by wesley821 9 years ago



how do i sand paint of a bmx? Answered

Is there a special type of sandpaper i should use when sanding paint of metal?

Asked by the poodleo 6 years ago | last reply 6 years ago


diy bmx

 Can someone please make an indestructable about how to build a bmx completely from scratch and preferably without welding, it's a project that i have wanted to try for a while now but i couldn't think of how to do it. 

Posted by Jamu3l 8 years ago | last reply 7 years ago


getting new bmx in a couple of days!!!

Its the silver fox bullion looks cool anyone got one?

Posted by sharlston 9 years ago


Should I use the front or back brake for my bmx bike? Answered

I have a bike thats been laying in someone's backyard for a few years and I'm trying to refurbish it and make it nice with a new paint job and some new parts. I'm going to take one of the brakes out. Should it be the front or the back brake? If I take out the back brake there will be a slight problem. You see something is wrong with it and the handle is stuck. I can't even squeeze the brake handle. A little help please!!! 

Asked by General Eggs 8 years ago | last reply 7 years ago


painting a bmx? Answered

Hey, my friend just sold me a bmx frame to me for a good price, but the paint is old and its rusty. I sort of have an idea of how to paint it; sand it, wash it, dry it, prime it, then paint it. however, that's just my guess as to how it would be done. camn anyone suggest some things that i should or should not do? thanks.

Asked by the poodleo 7 years ago | last reply 7 years ago


how can i take an crank off a bmx bike an put it on a mountain bike? Answered

How to change the things on my bike

Asked by tj1796 9 years ago | last reply 8 years ago


Small BMX bike. Recycle by building somthing cool with the parts.?

I've got a Mongoose brand BMX bike that I no longer ride. But instead of selling it, I'd rather take it apart and build somthing with it. I can't weld, I've only got one bike to hack up, and I'd like to buy as little materials as possible.

Asked by 9 years ago | last reply 9 years ago


Does anyone have a plan for a BMX sidecar? I have seen one on Fantasy Factory that tilts with the main bike.?

I have seen one on Fantasy Factory that tilts with the main bike. Also it appeared to be a bolt on unit.

Asked by RonnyPerez 9 years ago


magnetic bike pedals DIY? Answered

I'm Brainstorming a better magnetic pedal .   I know Proton and Mavic already make them But I'd like to have a Mag-Pedal that can be used with any shoe .    ... IDEA:  Using recycled neodymium magnets glued recessed into a gel insole  and magnets on pedals I'm hoping to make it easier than cleats on special shoes.  Of course you won't get the locked in power of straps or clippless cleats .This would be ideal for mud,gravel, quick commuting on regular bikes,bmx,mtb,people who what some full leg power on the up stroke but want to put your foot anywhere on the pedal you want.  Question: Might there be extra bearing ware from magnets?  Will there be enough magnetism through an inch of rubber to work??   Please critique my idea . 

Asked by BtheBike 8 years ago | last reply 6 years ago


I started painting my bike and the paint is getting a frosty orange peel affect whats causing it.?

When I started on my third coat it started doing the what sold i do the primer and first two coats went well but this one looks horrible.

Asked by coolpizzadude 9 years ago | last reply 9 years ago


How do I make a sidehack out of just a bmx frame?

How should I build and mount a Sidehack onto an old frame I have? I don't want to spend too much, and don't want to do too much welding if possible.

Asked by 9 years ago | last reply 8 years ago


I have a older Bmx bike with no handlebars. Anyone got any projects I can make out of it?

I found this bike in the back of my barn after it had been totally forgotten for years. It has no handlebars and a fairly rusty chain everything else seems to be in fair running condition. Any suggestions on what could be with it?

Asked by CrawdadMan 9 years ago | last reply 8 years ago


How I turned my Huffy BMX into a great stunt machine- and a question about decals

An ongoing project- the lost Huffy.chapter 1- Why people will think this is funnychapter 2- How I got itchapter 3- How I did itchapter 4- a questionChpt 1- Why people will think this is funny-Huffy is known(alledged) to be a cheap crummy Wal-Mart bicycle. I have a limited budget. I turn cheap crummy Wal-Mart bicycles(alledged) into great stunt bicycles.Chpt 2- How I got it-I was riding my bike, a six speed automatic, to school, and saw something reflect as I went by the weeds. I stopped, because I go the route almost every day and never saw anything reflect, and what should it be, but the most destroyed Huffy Rock-It I have ever seen in my entire life. I went on to school, as I was runnimg late and don't have a cell phone(I don't want a tumor). At lunch, I came back. I went into the Snak-Shak, and called the sheriff using a pay phone. Well, I waited. And waited. Lunch ended, so I left a note with my contact info at the scene, and left. At three, I came back. It was still there, note and all. I went home. Waited. No phone call from police saying they found the owner, nothing. Seven o'clock. I hitched a ride with my neighbors, over to the scene, and I got the bike.Chpt 3- How I did it- The handlebars were bent back at the stem in a 90 degree angle. I took them off, easily, because they were so busted that all I had to do was jiggle them a little, and they came off. After several attempts at riding without a handlebar, I got one off another frame I have. They wouldn't work. So I got the handlebars off another project(that failed)- an older Next Wipe Out that had been run over, bent frame. I put them on, and they worked great, apart from some adjustment issues- the rusted bolt needs replaced. I aired up the tires, and sat down. Painfully. Old Huffy seat, narrow as heck. I left it on there for for a while. Then, I thought, and thought, and finally asked what I should name it. So, Phoenix, arisen from the ashes of destruction, was about to be made into a really good bike. I recently replaced the seat with a plush, comfortable seat from a brand new (yet busted, due to cheap manufacture) Mongoose Rebel, but for the sake of the budget, the Bell "Little Rider" seat is as good or better than the seat I used. I only used that seat because our Wal-Mart sold out. I rode around, and it worked out great with the parts I had so carefully picked out. Things still need to be replaced, like my front tire, shaped about like this- ), and the pedals, I'll use the Wal-Mart kind. Pegs, also from the Wal-Mart, but I personally don't want pegs, as people tend to jump on the back of my bikes as they are, with no pegs, and I don't do those kinds of stunts. It rides great, except some things need a bit of oil, and just yesterday I adjusted the chain incorrectly, and now I'm in lots of pain from it locking up and throwing me off. But I fixed that, and am thinking about stenciling her name onto the frame.Chpt 4- A question-How do you get the decals off the frame? I sat there with a hair drier for about an hour and got a quarter of one off, but that's to slow, and is very uncomfortable. I want to stencil her name onto her.

Posted by extremegtafan 10 years ago | last reply 10 years ago


so what's everyone riding here?

I think I have close to eleven bikes in my garage right now (sort of unfortunately), though I only really ride three. for road/ commuting, I have a pacific voyager toys-r-us mountain bike that I converted into sort of a timetrialing singlespeed, complete with a shimano 400 crankset, profile aerobars, champion bullhorns, a look carbon fork, alex 700cs with hutchinson tires, and lots of other ridiculous things that don't belong on such a frame. I ride a diamondback venom park bike for bmx which I found at a garage sale for five bucks, not knowing just how good it actually was and my gary fisher bitter has been decommissioned due to a faulty front hub which blew out my axle and almost ruined my fork, so I'm slinging around a specialized rockhopper on the trails whose back wheel I destroyed and as a result, I've replaced it with a wheel off a peice of crap magna my friend left at my house a while back. I've got several others, but these are my ladies. they come and go quite often for me, but that's what happens. so what are you riding?!

Posted by Nkevin90 10 years ago | last reply 8 years ago


so what's everyone riding here?

I think I have close to eleven bikes in my garage right now (sort of unfortunately), though I only really ride three. for road/ commuting, I have a pacific voyager toys-r-us mountain bike that I converted into sort of a timetrialing singlespeed, complete with a shimano 400 crankset, profile aerobars, champion bullhorns, a look carbon fork, alex 700cs with hutchinson tires, and lots of other ridiculous things that don't belong on such a frame. I ride a diamondback venom park bike for bmx which I found at a garage sale for five bucks, not knowing just how good it actually was and my gary fisher bitter has been decommissioned due to a faulty front hub which blew out my axle and almost ruined my fork, so I'm slinging around a specialized rockhopper on the trails whose back wheel I destroyed and as a result, I've replaced it with a wheel off a peice of crap magna my friend left at my house a while back. I've got several others, but these are my ladies. they come and go quite often for me, but that's what happens. so what are you riding?!

Posted by Nkevin90 10 years ago | last reply 6 years ago


should I post ramp and grind rail?

Should I make an instructable for a nice DIY bike ,skateboard, roller blades, ect. ramp and a simple sturdy skate board or roller blade grind rail? 1-3 are of the ramp obviously that i made quite recently.4 is of the grind rail its like a year and a half old so its really beat up it was a lot better new ,and i figured out a better way to build it.here is the ible so far tell me what ya think https://www.instructables.com/id/EHRS1JAFGB0X664/

Posted by the_burrito_master 10 years ago | last reply 10 years ago


Electric Bike project, what kind of configuration should I use?

I'm planning to make an electric bike and have to select between many options, and want to know all the options available. Where should i put the motor? What kind of configuration (assisted, or motor only, etc.) should I use? I am actually making my old bmx to electric. It will weigh about 100kg with me on it, and the batteries and all. I want it to do at least 20-30 kmph. Im having a tough time selecting parts, and would really appreciate help.  

Asked by ppanchal1 3 years ago | last reply 3 years ago


how much do scrap yards charge?

I wanted to visit a scrap yard to pick up a bike(bmx or mountain) and some other scrap how and what rates do they charge?

Asked by sharlston 9 years ago | last reply 9 years ago


I've got a bike that's to small for me to ride, what should I build with the parts? Answered

I've got a bike that's to small for me to ride, what should I build with the parts? I don't weld and I'd like to have to buy as little as possible. It's a little Mongosse bmx bike with pegs and hand brakes.

Asked by 9 years ago | last reply 9 years ago


Bike trailer coupling device

Hello,            Have just made a bike trailer and used two  suspension forks  from the front wheel of a scrap bike to mount two 20 inch bmx wheels.Now the frame of the trailer is betweeen 5 and 10 cm below the level of the bike rack on the rear of my bike . Any suggestions as to how to couple the trailer to the bike? If needed I can provide photos if that would help

Posted by jamesk891 5 years ago | last reply 5 years ago


trying to convert my bicycle?

I found this bike in the dumpster its a X-games bmx with 20 inch wheels, looks like a dirtbike, i can't find these anywhere anymore it runs alright after i fixed it up, but i wan't to give it some more juice, i was wondering if anyone had any tips as to where i could find the battery type compact  enough to mount, and a converter as well, thank you?

Asked by Necron22 7 years ago | last reply 7 years ago


i am making a friction drive motorbike Answered

I am make a direct friction drive motorbike with a bmx bike and a 25cc weedeater i am going to mount it on a hinge and i will use a spring to tighten down the spindle. the hinge is just some angle aluminium mounted to the two bottom holes of the engine. the aluminum is just connected two a bolt that goes over the brake cross section. the spring goes from the end of the angle aluminum to the wheel axle. is that enough or do i need more?

Asked by BIGHAIRYDUDE 8 years ago | last reply 7 years ago


First time welding (and im 14)

have always been making things from instructables, but i was limited to office warfare type things knex etc. I have always taken interest in what my dad is doing in the garage. From making me bb gun targets to welding brackets on my bmx bike. My dad was really happy when i started to take an interest in welding. I welded for the first time tonight. He was impressed with me. He said that i can already weld better than a lot of people he knows. this was just something i tacked together.

Posted by ajmerc10 7 years ago


How to disassemble the rear bike sprocket ?

I am working on an electric bike/ cart thing. I can either use an extremely small tire (scooter) and the chain that fits that sprocket, or a bike tire and sprocket. I have limited resources and money. I have an old rear wheel sprocket from a bmx mike. This was cut down about a year ago and was not done very well. The sprocket is not level. i was wondering if there is a way to pluck the center piece, i think it's the hub, out of the sprocket to just use the toothed part. without cutting or welding as i no longer have my grinder and have no access to a welder right now.

Asked by NativeSs 6 years ago | last reply 6 years ago


What Are Your Wii Friend Codes?

Hi i would like to know what games you have, i have: Mario Cart Wii Super Mario Galaxy SSBB Wii Sports GH3 GH World Tour GH Metallica GH Smash Hits Links Crossbow Training Bully Scholarship Edition Red Steel Skate It Tigerwoods PGA Tour08 Call of Duty WaW Wii Play Dave Mirra BMX Challenge Wii Music Tony Hawks Proving Ground Active Life Outdoor Challenge and Wii FIt those are only the good games i have i do have online play my wii code is 0307-7176-7668-1773 also post your codes for mario cart wii mine is 4897-6362-6182 i will post some more codes for other games later

Posted by Shaznazabbadaz 9 years ago | last reply 7 years ago