hacking bluetooth

How can i get a Bluetooth hacking software that doesn't require pairing codes and works with iphone 4?

Posted by deltasec 6 years ago


Component AV to Bluetooth?

How do I make an adapter that takes an AV signal and transmits it via Bluetooth to a device such as an iPad or a laptop?

Posted by moonman239 8 years ago


Bluetooth help

I have  an old Wurlitzer jukebox and an old Wurlitzer speaker.  I'm wondering if anybody can give me any advice on how to convert them via Bluetooth so that the speaker can pick up the music from the Jukebox to Bluetooth?

Posted by MichaelA179 2 years ago


Bluetooth sensor

Hey guys, I like electronics but I want to learn about bluetooth interfacing. As a start I want to send a signal from a push button/sensor to another bluetooth receiver (phone for example). To be honest I have no idea where to start from. Can you help me out?

Posted by pjreijiri 3 years ago


Momentary switch to Bluetooth

I'd like to make a number of smallish (say 0.75x1x2 inches) battery-powered Bluetooth boxes each of which connects to a momentary switch, and sends an RFCOMM or HID signal via Bluetooth on depression and another on release, and which will to communicate with an Android device. Because I want to make several of these, I want something super cheap and super simple to make.  (The purpose is to make a simple wireless touch detection system for foil and epee fencing. Without on-target detection, it's not going to be great, but it will be an improvement over refereeing fully dry bouts, since at least one will have proper impact and lockout timing.) Here are options I've been thinking about: 1. One thing that would *almost* do the job is to buy one of those $3-5 ebay Bluetooth phone camera remotes, and just wire my switch to it. The only problem is that according to the ads I've seen, these Bluetooth phone camera remotes go to sleep in 2-10 minutes when paired (exact timing seems to depend on the model), and I would really rather avoid this (the 10 minutes is almost acceptable). If anybody knows of a way of keeping them paired and awake for a longer period of time (say, 15 minutes or permanently), I would love to hear. This would be the cheapest and simplest solution, and it comes with a case and battery (some units are even USB chargeable).  2. On the other extreme of the price range, I happen to have some extra Brainlink modules with an atxmega and an RN-42 module inside, and it wouldn't take long to customize the firmware to do the job. But the modules sell for $39 (though sometimes on sale for $20), and that seems overkill for something so simple. And they are a touch larger than I like (about 3 inches diameter, and an awkward shape). 3. Another option might be to use a cheap serial Bluetooth module without additional hardware, and wire the switch directly to CTS. Unfortunately, I don't think the cheap HC-06 modules support CTS, though I think the HC-07 does support it (but I don't know if I can access it as it's probably not one of the pins on the header). Moreover, there are two unanswered questions on Stackexchange on how to access CTS/RTS status from Android, so this might require using a laptop as the base station (which isn't ideal). 4. A very cheap microcontroller with a UART (or just bit-banging) plus a cheap Bluetooth module. This increases the complexity of the project, but might be the way to go. More specific recommendations are welcome, as I have no experience with the hardware side of dealing with a microcontroller (on the software side, I've spent a fair amount of time tweaking the firmware of the Brainlink unit).

Posted by arpruss 3 years ago


How to make a blue tooth small device to produce beeps ?

I am just trying to make something and it needs me to have a phone intract with any small device to produce beep in this small device ? when pressed a button or something on the phone. Does anyone know whats the best / easy way to go about this ? I have no clue about bluetooths devices works. If it can be done using any other technology .. I am open to hear your expert comments. Can you point me in right direction ? Thanks, Danny

Posted by puneetsd 5 years ago


bluetooth speaker

I need schematic of the bluetooth  speaker  i want to build that   thank to everybody

Posted by noam2013 4 years ago


Changing bluetooth identification data

Hi I bought this bluetooth audio module from DX.com. Now is it possible to change the bluetooth identification name, wch appears on the phone to pair, from what is mentioned. Thanks.

Posted by arjunmenon 4 years ago


How to hack Bluetooth Dongle to work with a headset = Bluetooth headset.

Hello, I need help, I have a Bluetooth audio dongle the kind that you plug into a USB port of a speaker to transform it into a Bluetooth speaker. But I was wondering if I can use it with a regular headset/headphones and a regular cellphone battery for power supply,. THank you

Posted by Toyanster 2 years ago


Make a Bluetooth USB Dongle out of a bluetooth enabled Cell Phone?

Is this possible, for my to hack a bluetooth phone and use it as a USB dongle for my laptop? If so, someone should make an instructable out of it and it will get a butt load of views.

Posted by MaltiK 9 years ago


Arduino bluetooth control

So, I've been on a project where i am trying to use a generic bluetooth gamepad to control dc motors through a HC05 bluetooth module connected to an arduino. I have no idea on where to start. I did some research about it but there dosent seem to be much information thats appropriate for this project. here is what im using now: -ipega bluetooth controller -arduino mega 2560 -HC-05 bluetooth module

Posted by thomasmanman 3 years ago


Guitar Wireless... Bluetooth?

I am really interested in the possibilities of cheap instrument wireless, and thought it might be doable to hack a Bluetooth headset/receiver for short-range wireless. Has anyone ever hacked Bluetooth before?

Posted by lucashaley 11 years ago


Ds Bluetooth

Is it possible to make a DS slot 2 (GBA) Bluetooth adapter?? If the above is possible, is it also possible to run an app from a slot 1 mem card and connect to a device using bluetooth at the same time??

Posted by monkhm 6 years ago


Will a project controlled through Bluetooth using a Smartphone be applicable for the RC Contest?

I'm making an electronics project which I can control using my Smartphone through Bluetooth.

Posted by Jonathanrjpereira 7 months ago


bluetooth sheild library

I have created a library for bluetooth sheild . but its showing some errors while compiling .. plz help me .h file class BlueTooth { public: BlueTooth(int Rxd, int Txd); void setupBlueToothConnection(); private: int _Rxd; int _Txd; }; .cpp file BlueTooth::BlueTooth(int Rxd, int Txd) {   pinMode(RxD,INPUT);   pinMode(TxD,OUTPUT);   _Rxd = Rxd;   _Txd = Txd; } void BlueTooth::setupBlueToothConnection() {   blueToothSerial.begin(9600); //Set BluetoothBee BaudRate to default baud rate 38400   blueToothSerial.print("AT+ROL=0\r\n"); //set the bluetooth work in slave mode   blueToothSerial.print("AT+NAME=slave\r\n"); //set the bluetooth name as "Slave"   blueToothSerial.print("AT+PSWD=1234\r\n"); // DEFAULT PASSWORD = 1234   blueToothSerial.print("AT+CMOD=1\r\n"); // CONNECT TO ANY ADDRESS   delay(2000); // This delay is required.   blueToothSerial.print("AT+INQ\r\n"); //make the slave bluetooth inquirable   Serial.println("The slave bluetooth is inquirable!");   delay(2000); // This delay is required.   blueToothSerial.flush(); }

Posted by selvak 5 years ago


Bluetooth speaker with Usb port

Hi, I need some help here..iI have a small 2.1 bluetooth amplifier and I would like to add on it a usb port inorder to plug my usb mp3...is it possible?

Posted by VassilisT 2 years ago


Bluetooth Arduino quad copter

I making a Bluetooth controlled Arduino quadcopter. I want some help with the code. It is using mpu6050 gy521 breakout board. Please help. I want it to auto level.

Posted by harshitsingh.111001 2 months ago


DVI / VGA to USB over Bluetooth?

I do graphic design and computer animation.   I am making my own wireless drawing tablet.  I have a bluetooth pressure sensitive drawing tablet.   A 16" (16x9) laptop display, bluetooth adapters, dvi / vga to usb adapters and various strong enough rechargeable batteries. The tablet is bluetooth enabled.  The display is using a dvi / vga to usb adapter.  Everything is working. What i need to figure out is how to stream my low res display from usb to bluetooth over to my computer's bluetooth. Any ideas?

Posted by dbacs 6 years ago


POLL: Bluetooth headsets make you look...

We've all seen them, those people walking down the street with those bluetooth headsets, thinking  they're from the future... What do we really think of them though. I've made a poll on my website: http://exploringtech.com/2010/07/poll-bluetooth-headsets/

Posted by munchman 8 years ago


Bluetooth Transceiver for headsets with a mic

Hello Everyone, I would like to build a module that is a Bluetooth transceiver that I can connect to a two-way radio. I have seen many transmitters for Bluetooth but they don't have the correct connection. I need a Mic/audio/Ground type. Can someone here point me in the correct direction. Thanks Hobs

Posted by PilotHobs 1 year ago


Can this be used with arduino

I opened up a Bluetooth dongle so i thought that if it can be used with arduino or not. The bluetooth  dongle was like this so plese help fast!!!!!!!!

Posted by rushabhpathak 6 years ago


Palm Portable keyboard to Usb or Bluetooth

 I am trying to figure out how to convert this Keyboard to either USB or bluetooth any help is helpful. It is a Palm Portable Keyboard. If you need more information or pictures please ask. 

Posted by 9mag9 5 years ago


[Arduino] Problem connection Bluetooth

Hi all, A while ago I got a HC06 bluetooth module. In the beginning everything worked OK, but now some problems have appeared. Pairing in Android works fine, as well as with my laptop. The problem arises when connecting my phone (Google Android 4.2 with Bluetooth 2.0 + EDR) to the device. BlueTooth Serial Controller 16 seems the only working app, but I would like to use my own application, based on the code described here https://www.instructables.com/id/Android-Bluetooth-Control-LED-Part-2/step8/Download/ Also other apps like BlueSerial Beta and Bluetooth ssp pro do not work. Does anyone have a clue how to solve this problem? Many thanks in advance. Regards, Zytro

Posted by zytro 3 years ago


want to add built-in bluetooth audio receiver to an active Speaker

I like to add a bluetooth audio receiver to a Sonos Active speaker. I would like to build it inside the speaker so it looks nice too. I assume I have to get one of the Bluetooth Audio receiver boards like this http://www.dx.com/p/xs3868-bluetooth-v2-0-stereo-audio-module-green-385930#.VVPymNNViuc . I think I should be able to find a 5volt connection somewhere in the Sonos speaker to power this unit and then have to hook it up to the AUX connection in parallel to get the audio going.  I was wondering if someone knows of a good bluetooth audio adapter that can pair multiple devices.  Also any other ideas or suggestions would be appreciated.  Thanks

Posted by nashmarkt 3 years ago


Bluetooth Class Request

Can we have a bluetooth class please? I'd like to see one with Blynk especially. I've been learning it for the past couple weeks for the Arduino 101 and there's no good resources online, just a bunch of hack and half of them don't work.  I'm actually gonna write a bunch of ible for the community, but a class would be awesome!

Posted by TechMartian 1 year ago


Steampunk Bluetooth

The Borgifier gets the olde steampunk treatment and turns the wearer into a bit of a clockwork human. I wonder where the artist got all those tiny cogs and if he has a good supply to replace them when they get knocked off. Link

Posted by fungus amungus 9 years ago


NEED MOD DONE, WIll Pay

Looking for some help with a mod.   I need the guts of a bluetooth receiver or headphones(just the bluetooth module) installed into the housing of a hearing aid.  Basically just the receiving module I dont need to talk on it, it is just for audio.  I don't need or want the hearing aid parts to work or anything else inside it other then the bluetooth receiver.  obviously I need the audio from the bluetooth to come out of it though. I just need it to be rechargeable.  I will provide all the materials.   That's all I am looking for and am willing to pay for the time.

Posted by smiegel 6 years ago


Boombox Bluetooth mods

I have a JVC RV-NB1 Kaboom Series Boombox and want to mod it with a "Decoder Board USB/TF/ Reader IR Remote Bluetooth/FM Audio Board Module MP3". "Bluetoothing" this box is easy but installing this module involves a bit more ie. usb, TF slot, aux, FM. IR for remote any ideas as to connecting the rest. I can't seem to find a schematic from JVC. It has an FM tuner and can decode mp3,WAV,CDA,FLAC. CD's.Plus I want to add either a LiPo 4200mAh battery or a transformer for charging the module.any ideas would be greatly appreciated. Chuck Reed

Posted by CR34 8 months ago


Bluetooth repeater

This is actually a question, for a group who appear to be the real hackers of science. OK, so much for the butter.. here's my question: I've seen an add for a Bluetooth device which will connect up to five headsets, forum style. But at 400 plus shipping, U.S., I was wondering if there might be another... more techie... cheaper way to do it. I only need to couple two headsets, but I understand that headsets don't have the smarts to be able to pair with each other. Any takers? Anyone do this before? Thanks, Stan

Posted by stancomm 9 years ago


How to bypass bluetooth device battery and connect directly to car power?

Hey all, Im looking to buy this bluetooth receiver, but it requires me to turn it on before i can use it. It has a battery and a switch. charges by micro usb. I have no knowledge of how a circuit works, but my goal is to remove the battery and switch, cut off the micro usb, solder the +/- and ground to where the switch/battery used to be The purpose is to have the device turn on whenever the car turns on.  Is that how this would work?  Thanks in advanced. 

Posted by D4VIDLE 3 years ago


Hacking a wireless keboard and mouse

I was wondering if anyone knows of any software hacks that will allow the wireless plug of my wireless keyboard/mouse to push sound to my bluetooth headset?

Posted by l0k3y 6 years ago


Eligibility for Things the Fly contest

I was hoping to participate in the Things that Fly contest, but my instructable:  https://www.instructables.com/id/Bluetooth-controlled-Quadcopter-using-MultiWii/ , is not being shown in the list when I press enter, even though in the description, it is written: If it flies through the air, it is eligible

Posted by rbanga 3 years ago


I need help for a coffee table with built-in bluetooth speaker and wireless charging capabilities

Hey people, Hakan here! I'm planning to start a diy coffee table with built-in bluetooth speaker and wireless charging dock. I ll start with electronics and I want to have high quality high volume sound because I ll be using the table also a home theater system. Unfortunately I know nothing about elecronics, can anyone help?

Posted by hakantopaloglu 1 year ago


Single Audio Input to dual input

Hi, I have an amplifier that only has one input, but I was hoping to have a bluetooth connection, as well as a 3.5mm audio jack. I was wondering if there was a way that I could do this? and that preferably it would switch automatically based on which is being used?

Posted by Fozzibehr 4 years ago


ADDING BLUETOOTH TO HOME PHONE

Hello Everyone, I love tinkering with electronics. While it is easier to go out and just buy some things that people make, it is far more fun to actually make something that looks unique and different. I love to try and repurpose things. I have been trying desparately to figure out how to make a wireless home phone that I have hanging around at home bluetooth capable so I can answer my cell phone calls with the wireless home phone handset. I know this would involve taking a bluetooth blueant or hands free device and wiring it into the home phone base, but I do not know where to wire it in.  You know how the wireless home phone handsets always have a "Master" phone base that receives the calls and then communicates with the handsets so one is able to answer the calls on whatever handset is the most handy, well that is how I want the bluetooth adaptation to work. So to re-iterate in case my explanation is as clear as mud, which it probably is, I want to take a wireless home phone system that has the master phone base with wireless handsets and make it bluetooth, BUT the hitch is I still want the calls from my cell phone to come through it just as it would with a home phone telephone line, so that I can answer my cell phone calls with the wireless/cordless handset. Of course, I do not know if this is possible, but I sure hope an electronics gadget guru out there can help me with this project that I have been anxiously trying to complete. Many Thanks for reading, Ambles

Posted by Ambles 2 years ago


blutooth telephone

Hi people who are smarter than me! I have been searching the great Google for the past while and I cannot find something that does this. I love the portability of cellphones and i love the look an feel of landlines (you cannot beat the look of a phone on a a desk. What I want is a device that connects to my cellular telephone wirelessly and that a landline can plug into. This means that it must supply about 40 - 60 VDC to power an old phone that DOES NOT HAVE EXTERNAL POWER SUPPLY so it could operate a touch tone phone from the 80's and 90's. When I get a call on my phone I want it to ring the phone. When I pick up the handset I want it to answer the call and allow me to talk to the person. When I place a call I want to be able to pick up the handset and then dial a 10 digit number and then it place the call through my cell phone. During the call I want to be able to press a number on the landline and for it to press that number on my phones keypad. when i put the handset down i want it to hang up. Is this even possible? can it be done? let me know! Thanks! scott 

Posted by ScottB7 1 year ago


Bluetooth dongle connecting to another bluetooth dongle?

Hello, I'm working on a project that requires bluetooth connectivity between two  devices over 3.5mm ports. I was planning on ordering this transmitter  http://www.amazon.com/gp/aw/d/B007JFF3RO/ref=mp_s_a_1_5?qid=1402263933&sr=8-5 and pairing that with this dongle http://www.amazon.com/gp/aw/d/B00J9L6YP6/ref=mp_s_a_1_3?qid=1402264117&sr=8-3 question is will these two pair with each other of would i have to get something like an arduino with a bluetooth transceiver?  I need to use the transmitter but i can replace the receiver if needed. 

Posted by MRCmegarallycar 4 years ago


Bluetooth Speakers

Hello everyone... rookie here.  I have been looking at the Bluetooth speakers instructables, but I was looking to take it another step.  I need to be able to also transmit to another speaker 30-40 feet away from the "master".  What would be the best way to approach this? Thanks, Tony

Posted by TonyH14 3 years ago


Bluetooth finger print reader

I need a design (better yet an operating) hand held, battery operated bluetooth enabled finger print reader. That is, the bluetooth enabled finger print reader would store one finger print and then compare the person usign the reader to the print stored. If the prints matched it woudl send out an approval code. I am sure someone out there could make one. How can I contact that person? 

Posted by Bruce747 7 months ago


DIY BLUETOOTH SPEAKER

  I have a pair of tv speaker that are 16 ohms and 11 w, and I wanted to turn them into wireless bluetooth speaker kind of similar to this one. (https://www.instructables.com/id/DIY-Bluetooth-Speaker-PartyBar/) . I was wondering what kind of amplifier, bluetooth module and battery would I need. these are the speakers I have- http://www.ebay.com/itm/378G110A567YAK-TELEVISION-.. I am a noob in these kind of project so, detailed explanation would be helpful. Thanks in advance.

Posted by Rafi321 1 year ago


bluetooth hack/crack/help.

If anyone here knows the ins and outs of bluetooth, i would like some help with my current instructable. mainly rewiring, range extention, key codes, frequency changes, advanced stuff, not for the weak at heart.

Posted by nickdisney 11 years ago


Using Bluetooth to control simple components

I am undertaking a minor project with a friend and we need to build a bluetooth transmitter to be controlled by a mobile phone. All we need it to do is to give an electric signal on demand. Any expertise, components and suggestions people can share with us, I would be very grateful for. Merry Christmas! x

Posted by Martain 6 years ago


Small, wireless, non-bluetooth keyboards.

I own a 1st gen kindle fire. I use it alot, and bring it to school everyday, and was trying to figure out how to get a keyboard for it. It doesn't have any bluetooth but I have it rooted and as shown here custom kernel can get you far http://www.youtube.com/watch?v=-F79sLcFwTU. I was wondering if anyone knew where to acquire a keyboard about 7" that is almost flat and doesn't use bluetooth but is still wireless. 

Posted by lfarley 5 years ago


Send audio with arduino through bluetooth to an IOS and save it in the App.

I have an arduino board and I need to capture audio with a mic, send it through bluetooth BLE and receive it in an IOS App to save it in the iphone or Ipad.

Posted by FreddyA17 7 months ago


Bluetooth Headset Hack

Anybody know how to turn a mototola H500 (Motorola H500) NO I DID NOT GET IT FOR THAT PRICE i got it for free with my cellphoneinto a bluetooth adapter for a pc that works with usb i dont think its possible but if it is then thanks a lot

Posted by lightpacker 11 years ago


bluetooth 4 transmitter to headphone latency reduction

Hey everyone! i'm seeking some advice about a system i've been trying to work out - a bluetooth audio headset from a PA system for vocal monitoring during band rehearsals. currently i'm running microphone -> PA -> bluetooth 4.0 AD2P compatible audio transmitter -> powerbeats bluetooth 4.2 headphones the connection is working fine, the only issue is latency between microphone and headphones (approximately half a second), which makes it very difficult to use as a monitor as i require very minimal latency to hear my voice in synchronisation with the rest of the band. a few questions; does bluetooth simply have an unavoidable lag due to data compression? is it possible for me to hack the bluetooth transmitter in some way to increase the rate of compression/transmission? what would you recommend as a cheap substitute in the event that nothing can be done? thanks very in much in advance, Austin

Posted by totemgoat 2 years ago


Bluetooth to landline phone

Hello, I would like to use the bluetooth headset I use with my cell phone for my landline phone at home. There are oodles of instructions out there on how to hack headsets to put them into old phones, I am looking for the opposite. Apparently Jabra used to make something that could have got me started (I believe it was called an A210) but that doesn't seem to be sold any longer. There are some wireless phones out there that incorporate bluetooth, but why add a battery operated wireless phone to a wireless headset - the bluetooth range would give me what I need to stay unencumbered. I have an old cell I could hack apart but I suspect that it would be tricky to get its bluetooth hacked into the analog phone line... Any thoughts? berserk

Posted by berserk 6 years ago


Android and windows 8 Bluetooth

Well here is my problem, I have seen the many awesome things on instructables that you use an app preloaded on an SD card to control an arduino through a Bluetooth module. But I might get the new windows 8 phones and I don't see any windows 8 phone projects. I would assume that I could easily connect to the Bluetooth module and but what about the app.? Does anyone know where I could possibly find a tutorial?  Please help! 

Posted by broskiz 5 years ago


Covert bluetooth dongle to mini USB?

Having purchased an android tablet with mini USB ports I have finally got my tiny USB bluetooth dongle to work with it using the provided OTG USB to mini USB cable. I was wondering if anyone has dismantled a bluetooth dongle and fitted it with a mini USB connector? I think it would be so much better to have it sitting directly flush to the tablet rather than having it hanging out at the end of a cable. Would this be easy to do or should I leave well alone? Thanks Gaz.

Posted by gary101 6 years ago


Bluetooth adapter for car audio

Dear all, I have a Skoda audio system integrated into my Skoda which has a cd reader plus a cd changer, but  only a CD button(no AUX available). I would like to stick inside the audio system a Bluetooth receiver so I can listen to music stored in my phone. The goal is to solder a Bluetooth receiver to the audio system without loosing the cd functionality. On top of that I would like to be able to change from one source to the other without having to use an external button like a 3PDT switch. Thanks in advance, Pedro

Posted by pcardoso73 2 years ago