Blanx Customizable Action Figures

I was looking around Deviantart where I searched "custom action figures" to see what new was being posted in that area.  I came across a user who had pictures of this flesh-tone and gray colored action figure that lacked details.  When I read the description, I found out it was a new type of action figure called the Blanx Customizable Action Figure, which would allow people to come up with their own designs.  I'm not sure if anyone else has heard of it, but I figured I'd post the link here, as it may be useful to not just action figure modders, but for artists as well (in fact, according to the site, the Blanx Customizable Action Figure can be used as a sculpting armature, to which a couple of members in the user gallery have used this figure for).  http://www.gonativetoys.com/index.html

Posted by CB2001 7 years ago


Customizable soundboard?

I would like to make what is essentiallya customizable easy button, essentially a button that when pressed plays a wav/mp3 file from an SD card. Could someone make a guide?

Posted by MithosKuu 4 years ago


Customizable pdf does not work

I just paid for a pro membership for access to the customizable pdfs.  I have tried three times now, and it does not work for this instrucaible: https://www.instructables.com/id/Paracord-Wrap-Bottle/

Posted by moonshinedrums 6 years ago


Customizable Dragonfly Assault Crossbow: Review

Here is the review for the Customizable Dragonfly Assault Crossbow by Wicky.I used the y-bow for the review, the same one in the picture.What to expect: Innovation: 9/10 I think shaping the bow in a y form was innovative and added more power with a shorter arm.Strength: 7/10 the arm is kind of weak. But the overall thing is good.Range: 9/10 shot very far and is powerful but not that accurate. It broke a red connector and two gray clipsLooks: 8/10 has a unique look but I like it.Parts: 8/10 fairly low on parts but uses more whites than most have.Handle: 7/10 not that comfortable but again uniqueStock: 9/10 nice and sturdy. I like it.Barrel: 8/10 the barrel is kind of flimsy but okay.At the end: I would give the gun 9/10.Here is the link to the gun. https://www.instructables.com/id/DragonflY-Assault-Crossbow/Thanks for reading.

Posted by Killer~SafeCracker 9 years ago


Home made strobe light

I've made a couple led strobe lights, well put assembled from kits really, and I was wondering if anyone has any suggests for sites etc. that might help me design a more customizable strobe light. It's really for costumes and the like.

Posted by Bearch 7 years ago


PC mouse Mod

I have always wanted to see my electrical usage in real time. However, the watt meters available can not handle whole house wattage. I have an idea but lack the programing skills to pull it off. Use a modified usb mouse to read the dial as it spins and tabulate the totals. Because of the distance through the glass to the meter disk- a laser pointer may have to be used. Required to work: USB mouse Modified mouse driver- must not be recognized as a mouse in the PC customizable display output. Laser pointer? Anyway, if someone could help with the software that would be great- Thanks

Posted by ryancey777 10 years ago


Instructables android (ios) app - improvement ideas

I'm making this topic in order to make people come forward with their ideas for improving the instructables android and ios app. So if you have any ideas for improving the app functionality, overall space requirements, app features or anything else please come forward. As a start I would like to name a few features: - I would really like a "clear cache" button and an option to cache to a SD card; - I have no idea if this is done, immediate project updates between the app and online profile of the user that is logged in; - immediate comment updates when someone comments on a project and all relevant project updates (e.g. when a project is featured), also definable by the user; - a popup that comes up when you press back button on the main screen stating "press again to exit". That is all from me now. I'll be back with more ideas (I think). Join and let's make the app much more user friendly and customizable.

Posted by Project 23 5 years ago


Circuit help

So, my brother tasked me with making him a customizable doorbell for his house for Christmas (of course he didn't tell me till last week, but whatever). looked around at a bunch of stuff online and found a few decent items. some of them use those voice recorder modules from radio shack...which  might work, but I've used them before and they're pretty quiet. also, not the best sound in general from the mic used to record to them. so I found this thing http://spritesmods.com/?art=doorbell&page;=1 which is a riff on this thing http://elm-chan.org/works/sd8p/report.html  which uses an ATTINY85 to play audio via the PWM output from an SD card. I like this guy because it's gives more options for sound and is generally more "gee whiz". however, the guy built it from scrap parts and has some admitted flaws in it, notably the power supply and the audio amplifier. so, I'd like some help figuring out how to build the same thing, but with a more "correct" power supply and amplifier. also, not exactly an electronics wizard so the fact that there are a billion different chips listed as ATTINY85, I wouldn't mind if someone can make a more sensible parts list (there aren't that many parts). I plan to trigger the thing with an off the shelf wireless doorbell type thing.

Posted by crapflinger 2 years ago


Knex Grabber

I am sure many of you are familiar with my knex claw grabber. I deleted my old account so I could have all of my instructables on the same account. However, I will only repost it if enough positive comments are made. I really don't care if you spam positive comments. Any comment advertising something unrelated will be deleted. I am sure some of you are familiar with my old grabber, seen below. Recently, I made a grabber roughly the size of smickel's knex claw. Please note that I made my old grabber before he did, so I did not copy him, nor did he ever copy me. Proof can be found on the deleted instructable. My little claw grabber, which by the way I dubbed Grabber Jr., has many different attatchments such as an extra handle so you can hold it horizontally, different pumps so you can use the one that's right for you, a cool little attatchment to the front which allows you to open it wider, customizable space capacity, up to three spikes at the end to help you grasp something better, different lengthed coloumns, and other neat little attatchments. So, this is for all you dedicated knex builders out there; Should I repost my original knex grabber? If I should, should I also post Grabber Jr.?

Posted by SuperVader 9 years ago


RMACR (Red's Mini Adaptive Combat Rifle) V.2

Apart from my Calico M-950 and my Magpul Masada ACR, the RMACR is my favorite build of all time. I sorta consider it my TR8 of magazine guns. As this is the case, I bring you the RMACR V.2. While it is not a huge change from the first version, it is still a great gun. Moreover, it may be generic to some people, but if a generic gun does its job, and does it well, what does it matter if it is generic. With ranges exceeding 50 ft., a 16 rd. magazine, a new (sturdy) stock, nice sights, this gun would excel in an indoor K'NEX war. Features: Looks great (IMO) Sturdy (except the pistol grip) New stock Really nice pin-pull-length 16 rd. magazine Relatively good rate-of-fire Really accurate Fun to shoot This gun can fire the ammo you see in pic #14 (which is THE best ammo, IMO), or it can fire white rods. It is very customizable, as you could change almost anything (except the mech) and it would still work great. Sadly, it does use broken pieces, and it's magazine is not "preloadable," but the gun is nice overall. I am posting this as a forum topic because I want to gauge interest in me posting a full set of instructions. -The Red Book of Westmarch

Posted by The Red Book of Westmarch 4 years ago


Call for Participation: 3lectromode - DIY Wearables

3lectromode is looking for designers/programmers interested in doing an internship to co-develop future D-I-Y projects. In particular, we are looking for fashion designers skilled in pattern making with an interest in textile design and programmers interested in further developing the Arduino platform for wearables. Respond before May 1 w/ cv & portfolio. Founded and directed by designer-artist Valérie Lamontagne, 3lectromode holds the vision of innovating in the field of wearables by combining technology with customizable prêt-â-porter fashion. We aim to inspire a future where wearables are democratized, aestheticized, and performative. We are a small design group interested in developing accessible wearables which combine D-I-Y technology with current fashion research. We are fascinated with the potential for technology to create new modalities of interaction between the body and its environment, and are interested in the performative potential of technology. Key to our design ethos is a to create a library of open sourced tools which can be used easily by anyone. We develop wearables which we hope will be meaningful to the wearers by enriching everyday experiences with an awareness of both ourselves and the world around us. We see our work as creating a further connection between humans and the world at large of machines, information patterns, environmental data, and organic material. Associate designer at 3lectromode is Magalie Coulombe-Noël, a trained fashion designer and technologist. Fellow collaborators include: Elio Bidinost, physical computing expert; Claudine Lamothe, web programmer and technologist. 3lectromode was founded in 2010 and is located in Montréal, Canada. Contact: valerie@3lectromode.com 3lectromode: democratized, aestheticized, performative wearables. 

Posted by 3lectromode 7 years ago


(newsletter) Kilo-Lumen Bike Light, Sparkleball, Amazing Pumpkin Pie...

Nov 26, 2008 Sign-up for this newsletter: function openSubscribePopUp(src){ var emailValidate = /\w{1,}[@][\w\-]{1,}([.]([\w\-]{1,})){1,3}$/ if(emailValidate.test(src.value) == false){ alert("Please enter correct email"); return; } window.open("/newsletter/newslettersignup?email=" + src.value,"newslettersignup1","status=yes,scrollbars=yes,resizable=yes,width=420,height=250"); } Welcome back! Making something sweet for the holidays? Then enter it in the Holiday Treats Contest and win a custom laser-etched rolling pin! Show us your best creation powered by AA, AAA, C, or D batteries and win a full set of eneloop rechargeable batteries in the SANYO eneloop Battery Powered Contest! Color a robot and send it in to help us decorate Eric's office!Coming very soon... our biggest contest yet! Any project using tools will be eligible, so start tinkering now! (no-melt) Sparkleball by sparkleball_lady Perfect Oven Sweet Potato Fries by jessyratfink Cook a Huge Dinner w/ Spreadsheets by canida Kilo-Lumen bike headlight by kc6qhp Win a sweet set of rechargeable batteries! Win a custom laser-engravedrolling pin! Homemade Flavored Marshmallows by cainunable Build a Greenhouse for under $25 by PondPlantGirl Turn a Photo into a Stencil! by Weissensteinburg Amazingly Smooth Pumpkin Pie by ewilhelm "Dead" Battery Lamp by zjharva Arduino Controlled Servo Robot by Stuart.Mcfarlan Modular Pie-cosahedron by turkey tek Bicycle Oil Lantern by alpacalypse Make a gift special with these customizable Instructables Vote for your favorites! How to make Soft Drinks by SFHandyman Bench Saw Table for a Wood Lathe by Phil B Cranberry Relish by LasVegas Hard Drive Persistence of Vision by vishnubob Now go make something awesome, and I'll see you next week! - Eric Sign-up for this newsletter: function openSubscribePopUp(src){ var emailValidate = /\w{1,}[@][\w\-]{1,}([.]([\w\-]{1,})){1,3}$/ if(emailValidate.test(src.value) == false){ alert("Please enter correct email"); return; } window.open("/newsletter/newslettersignup?email=" + src.value,"newslettersignup2","status=yes,scrollbars=yes,resizable=yes,width=420,height=250"); }

Posted by fungus amungus 9 years ago


My K'NEX WASP (+ Mods, Internals, and Video)

The WASP (War Assault Semi-automatic Pistol, designed by oodalumps) has always intrigued me. I mean, come on, its a semi-automatic TR8, you can't go wrong with that mix. The gun is great. It is nice looking (well, I think it is, my mom said it looked like a backwards boat...), it is simple, it is almost foolproof, and it gets relatively good range for being a SA gun. It is not piece consuming, and it is heavily customizable. Features: Good range (for a semi-automatic gun): 20 - 30 ft. (it kinda depends on what ammo you are using, what type of bands you have, and how many) Easy trigger pull (compared to other semi-automatic guns) TR8 included Sturdy (except for the TR8 "bay," the area below the TR8) No bullet jams (I ran at least 100 rounds through this thing, and the only thing that jammed was the trigger) Semi-automatic mechanism could be used in almost any gun (The first 15 pictures are of my WASP [including one pic of oodalumps WASP], some of them may contain image notes if you want to know more about the gun.) After you have looked through the first 15 pics, you will notice that the background changes on pic 16. The gun in pic #16 is a WASP, but this WASP has a grey connecter magazine. Admittedly, this mag did not work the best, but it was a good try all the same. I believe the mag could have held 5 - 10 bullets, and would have been sweet if it had worked. Give it a try for yourselves. Now move on to pic 20. In this pic, you will see another WASP mod, but this mod has an oodammo rail that you could use. This rail was very crappy, and it needs some work, but, overall, I got it to shoot 20 ft. (not using oodammo). Enjoy! -The Red Book of Westmarch

Posted by The Red Book of Westmarch 4 years ago


LED bracelet inlay

This is my first post so please excuse if I am in the wrong place :( I have a boot bracelet with a leather back and ornate bling glued to the leather and sewn at the edges. I want to add small LED strip lights, weather proof, cutable every 3 lights, double-sided adhesive to the center (between leather and ornate mesh side. I want to be able to turn it  on and off.  I figure 6 mini strip lights should be more than enough.  Here are the lights I have: Features: Superbright 3528 SMD LEDs with high intensity and reliability. 5 Metre strip with 600 LEDs Self-adhesive back with double side adhesive tape. Maintenance free, easy installation Long life of 50,000 hours Flexible strip which can easily be curved around bends. UUltra-bright but running at low temperature Viewing Angle : 120° Input volts: DC 12V This Cool White strip light has 600pcs Double Density,SMD 3528 LEDs The Strip is Customizable for any length you want, Cuttable every 3 LED's without damaging the rest strips, flexible and can be bent at any angle, Works with a 12 Volt Power supply Low power consumption, Eco Friendly, High Quality, high intensity and reliability, High Quality Cool White, Double Density 600 LED's, 3528 SMD 5M/16.4 ft, high intensity and reliability, Long lifespan,   Hopefully that helps.  What I need is a battery source that can be added to the inside of the bracelet that will light it up and allow me to turn off and on (push on/off is better than switch). The source would have to be in something waterproof like a latex substance and can only take up a minimal amount of space 1.5 - 2".  Obviously the batteries would have to lay flat (flat coin-like batteries?) Is there ANYONE out there who can give me ideas?   Thank you!!!  

Posted by harley0805 3 years ago


Quick rundown various Linux and BSD operating systems:

1.  Debian - one of the older base distributions and currently one of the most popular.  Uses the "apt" package manager for software installation.  Excellent server distribution. 2.  Fedora - the free community edition of Red Hat Linux.  Sponsored by Red Hat Linux.  Uses the "rpm" package manager for software installation. 3.  openSuse - sponsored by Novell, originally developed largely in Europe. 4.  Mageia - fork of an older distribution called Mandriva Linux. 5.  PCLinuxOS - also a fork of Mandriva.  Looks to provide out-of-the-box support for graphics and sound cards. 6.  Red Hat Enterprise Linux (RHEL) - based on Fedora, RHEL includes many enterprise-level enhancements and is supported Red Hat corporation. 7.  CentOS Linux - free enterprise-grade operating system that is built from the same source code as RHEL without the proprietary enhancements or support from Red Hat.  8.  Puppy - very small Linux operating system that boots the OS and applications completely into RAM.  Can operate on older computer equipment.  Excellent for use in emergencies and to recover data from hard drives. 9.  FreeBSD - operating system that is based on BSD code. 10.  Ubuntu Linux - easy to use operating system that is based on Debian Linux.  Supported by the Canonical corporation.  Ubuntu means "humanity to others".  Excellent server distribution. 11.  Linux Mint - currently one of the most popular distributions, based on Ubuntu Linux.  Looks to provides complete experience by including browser plugins and media codecs (ie: Flash) upon installation.  Excellent desktop distribution.  Also comes in lightweight editions for older hardware 12.  NetBSD - based on BSD code.  Can be run on a wide range of hardware.  Currently there are 57 different hardware architectures that can run NetBSD. 13.  OpenBSD - based on BSD code.  Source code built from the ground up with security first and foremost as the goal.  Ships "secure by default", that is, all non-essential services are disabled.  OpenBSD has embedded cryptography throughout the operating system; it utilizes OpenSSH, Pseudo Number Random Generators, cryptographic hash functions, cryptographic transforms and crypto hardware support. 14.  ClearOS - server and network distro designed for small businesses.  Based on Red Hat Linux.  Web-based interface controls anti-virus, anti-spam, VPN, content filtering, bandwidth manager, file services, SMTP services, print services, SSL certification, and web services. 15.  Kali Linux - distro that specializes in penetration testing and security auditing.  Over 300 penetration testing tools.  Based on Debian Linux. 16.  Lubuntu - lightweight version of Ubuntu Linux for older computers and netbooks. 17.  Gentoo - highly customizable distro that uses a package system called portage written in Python.  Mascot is Larry the Cow.

Posted by matt392 4 years ago


Homemade Gift Contest Winners

Congratulations to everyone who entered the Homemade Gifts contest! Thanks to your efforts, the Christmas-Industrial complex was dealt a heavy blow this holiday season. I've gotten lots of future gifting ideas from these projects, and hope you have too. This year we gave all our cousins awesome laser-engraved water bottles (to practice for the third prizes!), but didn't get our act together in time to make gifts for the entire family. Next year we'll try to move even farther off the consumerist grid. Start thinking now, and you'll be ready for both the holidays and next year's gift contest!Check it out:First PrizeThese three projects win one of these tools: a Cuisinart 7c food processor, a Dremel 400-6/90 400 Series XPR Rotary Tool Kit, a Fluke 115 True-RMS Multimeter, or a Singer 1525 sewing machine.Give the gift of Robot Invasion by MrMunkiHard drive platter clock by albetchaMagnetic Rubik's Dice Cube by burzvingionSecond PrizeThese five projects win a Leatherman juice S2 pocket knives laser-engraved with the Instructables logo and the author's name.freehand glass etching by RobyntheslugLiterary Clock by mdhaworthJunk box flowers by photozzHome-made Sun Jar by cre8torTechnical Monster by redribboncrowSecond Prize prime!These five projects win handy Make Magazine Thomas J. Glover Pocket References Guides.The Persistence of Recorded Memory by fungus amungusPersonalized Guess Who by randofoWooden Candle Holder by samWall mounted magnetic knife block by radiorentalUSB powered LED christmas tree by T3h_MuffinatorThird PrizeThese 10 projects win the choice of a water bottle or a flashlight laser-engraved with the Instructables logo and the author's name.Countertop Greenhouse by whamodyneA Box Kite! (that's almost bigger than my wife!) by marcward86Photograph to Stencil by nakNixie Tube Ornament by ianContinuity Tester by neelandanUSB controlled mini lava lamps by jameshLED Floaties by TetranitratePC remote control by ZujusResistor Man by chrCustom Mirror by iammatouHonorable mentionThese 15 projects win an Instructables patch.boy crush mash-up T by liloBlanket With Built-In Hood by trialexKat Litter Cake -- Gifts Impossible to Re-Gift by trebuchet03Pocket Tripod by theRIAATeddy Bear Speaker by constructer of the oddHow to make a nice wooden sword by BobbyMikeTrendy note card gift set by outofthewoodsDisk Drive Dollar Bank by FrenchCrawlerJewelry or Serviette holder by puffin_juiceLucky Charms iPod Nano Gift Box by luckymonkeygarageGift Home made high power air BB gun for Christmas! by african_andy187How to bind a book by eleraamaPinball Coffee Table by heyrockerCustomizable Fleece Hats by ryzellonXylophone windchime from a children's toy by zieakThere were scores of fantastic projects, which made the judging quite difficult. (This is the best kind of problem to have, of course- keep up the great work!) Thankfully our judges were up to the challenge. Please give a round of virtual applause to judges jess, ian, LasVegas, rbhays, lisarea, GregDDC, Tool Using Animal, trebuchet03, randofo, jeffreyf, beemer, HeresyOfTruth, FrenchCrawler, turkey tek, zieak, mever, vatosupreme, ewilhelm, DavidBrown, numberandom, and fungus amungus. Judges weren't allowed to vote for their own projects.Since we only give one prize per person, these fine entries (which would otherwise have won prizes) don't appear above:Wine Bags by mdhaworthHand crank lego usb charger by Tetranitrate Frankenbear Synthamajig by randofoTelephone Handset Microphone by randofoWe'll contact the winners shortly via personal message with prize-claiming instructions.For circular linking, here are the original contest instructions.

Posted by canida 11 years ago


Pro Instructables Accounts

As you know, the recession has has hit many industries hard; it's even changing the way the internet functions. While we hoped to provide an excellent service for free under an ad-supported model, it's becoming obvious we'll have to do something different to help our community survive this economic downturn. So, in the next few weeks, we'll be launching Pro Instructables Accounts.The pro account feature set is still slightly in flux, but it will give you access to some of our existing features and some new ones:Private Instructables - share an Instructable with only a small group of peoplePatches - create and send patches to other usersFewer Advertisements - No contextual (Google) ads, or ads from indirect networksPro Users forumPDF versions of Instructables, including more customizable optionsView all steps on one pageAccess to secondary images sizes on an Instructable's step All images are available for freeNo captcha for Private MessagesPro badge on user iconWe have not finalized the pricing, but it will be reasonable, and you will be able to join for periods of one month, one year, or two years. Initially, we'll only accept payment via PayPal. Every user who has registered prior to the release of pro accounts will receive at least 3 free months of access to the existing features we are turning pro. During this period, we hope to convince you that the features are useful enough to pay for.Why we're doing this:Instructables provides a tremendous amount of value to everyone who uses it. Our authors benefit from having a superior documentation tool and an already established and sizable audience; our members benefit from our active community management; and our audience (those who do not currently have accounts) benefit from inspiring, entertaining, and useful content. In consideration of Instructables' value, you currently look at and occasionally buy products from our advertisers. Supporting content with advertising is a wonderful system, but it isn't covering all of our costs, so we're asking you to subscribe to support us and the DIY community. One of the things I've endeavored to create at Instructables is an egalitarian meritocracy. Anyone can post an Instructable and anyone can comment on an Instructable, not just editors and approved writers; we don't highlight our admin accounts or often use them to moderate comments because it's important that the community as a whole enforces the "be nice" policy. In that spirit, we won't be giving away free pro accounts. I, and everyone else who works here, will buy pro accounts for ourselves. This may seem like just an exercise, but with it I hope to make the important point that we value Instructables and we want to support it. Having been an Instructables member for a long period of time, or having the greatest number of pageviews will not entitle you to a pro account. Just like anyone can post an Instructable, anyone can become a pro member, and the price is the same for everyone. If a pro account isn't for you, we'll always offer a free account. The free account maintains the site's core functionality, and is extremely usable: You can follow an Instructable's directions, post pictures of your results in the comments or another Instructable, and enter all of our contests and challenges. We've tried to carefully balance providing free access to the content -- so we can provide a large audience to our authors -- against making some of the more bandwidth-intensive value-adding features available only to pro members. As an author, you'll always retain full access to your own projects, including PDF versions.I often tell people that Instructables is an online magazine. In reality it's so much more than a magazine, but as an active member of the community you already know that. I hope you'll subscribe.

Posted by ewilhelm 9 years ago


KWR1 V.1 + "The More Bands, the Better" Myth

The KWR1 (K’NEX War Ready gun #1 Version #1) V.1 came out of my idea to build an entirely “mod-able” slingshot sniper weapon that you could rely upon in any outdoor K’NEX war (hence the name). You could make this gun longer; you could make this gun shorter. You could add a nonadjustable stock; you could make the stock longer, you can do practically anything to this gun (other than change the mechanism and the handle position).   Features: Good range: 60 ft. (1 band) – 100 ft. (5 bands, 45 degree angle) Can shoot: Oodammo (1 band: 60 ft.), Large K’NEX wheel (5 bands: 30 ft.), Small K’NEX wheel (5 bands: over 80 ft.), Lego bricks (5 bands: 50 ft.), NERF darts (5 bands: 50 ft.), and size #117 bands as a RBG (30 – 40 ft.) 10 point adjustable stock (see pictures 8 -11) with “Stock lock” (see pictures 13 - 15, 17) Totally customizable Safety (see pictures 15 - 16) Cheek rest (see picture 9) Not too piece consuming   Now, with all of that out of the way, I want to talk about ammo sizes and the “the more bands, the better” myth. So to do that, let’s look at the stats (shooting with three size #117 bands):   Red Connecter Ammunition: No rod attached: 62 ft. Green rod attached: 55 ft. 4 in. White rod attached (oodammo): 42 ft. Blue rod attached: 35 ft. 5 in. Yellow rod attached: 40 - 45 ft. Red rod attached: (got caught in the bands) Grey rod attached: (got caught in the bands)   Grey Connecter Ammunition: No rod attached: 64 ft. 9 in. Green rod attached: 59ft. 4 in. White rod attached: 50 ft. Blue rod attached: (got caught in bands) Yellow rod attached: 40 ft. Red rod attached: (got caught in bands) Grey rod attached: (got caught in bands) As you can see, the larger the round got, the lower the range you would receive. I think that this is a direct proof that bigger bullets are not necessarily good ammunition. For example, the ZKAR uses yellow rods? Might it get better range if it shot blue rods? Now, admittedly, the instances may be different with different guns, but I highly doubt it.   Conclusion: Stick with ammo sizes between blue rods and white rods (including both the blue rod and the white rod).     Now I want to talk a little about the “the more bands, the better” myth.   I took the KWR1 out to my backyard, grabbed some oodammo (growing in our garden, mind you), and commenced shooting from a prone position. Then I got this idea… what if I was to shoot with only 1 band, and not all 5? So I started to do that, leaving the bullets where the fell after having been shot. Then I decided to go back to shooting with 5 bands, to see how much better the range would be. So I fired a couple rounds… and got no better range than I did when I shot with only 1 band. I did this a couple more times, and found it to be true.   There is a myth (myth = a traditional story) pervading instructables that you will always get better range with more bands. Now, it is my personal opinion that if a gun can’t get 50 ft. with two bands, it’s no good, but that is irrelevant.   Conclusion: More bands does not necessarily mean better range.     Now, I am not stating these subjects as fact, for that would seem arrogant and presumptuous, but I do believe they are, to some extent, true.   -The Red Book of Westmarch

Posted by The Red Book of Westmarch 4 years ago