Bye guys...

Well, I might be off for a little while. Just though I'd let you guys know...

Topic by DrWeird117 10 years ago  |  last reply 10 years ago


hey guys!

I need help i want to build a gun but not sure which one and i want to make it my own design what would you guys want?like a gun from a game or a movie?

Topic by smidge147 11 years ago  |  last reply 11 years ago


Sorry guys...

Sorry, I'm getting less and less active around here. I'm not telling you I'm leaving, I'm just not going to be answering all your comments, and I'm not going to be around much. BUT, I'm still going to be posting guns every once in a while :) If you want me to build anything awesome, you can tell me your idea here. That's it.

Topic by Seleziona 8 years ago  |  last reply 8 years ago


Hey Guys.

Okay. 1st off, sorry about my long absence. I had a busy summer, and I'm kinda running low on motivation. I'm going to be checking back regularly soon though. 2nd off, sorry if I missed some of your folks comments. When I came back a few weeks ago I had a few hundred comments that I tried to respond to, so if I missed any or your questions or such, please post them again here. My bad. 3rd, I'm going to be posting a video of a huge project I've recently finished. No instructions, as its rather unique to my bathroom *cough*cough*. Also, I've decided I've had it with my danged safe. I'm going to strip away the casing I made and just post instructions for the new mech. I'm really just out of motivation for the project, and others have posted safes and such too, so its not so new and cool anymore. And finally, I want to build a cannon bigger than the V1. Will happen this winter hopefully. Thanks folks, ~IaC

Topic by I_am_Canadian 8 years ago  |  last reply 8 years ago


Hey guys!

Hi people! As you may have (hopefully) noticed, I haven't been around as much. Well, I've been swamped lately in between some family sickness, internet troubles, my laptop going poof, and Swine Flu hitting us over here, as well as an exaggerated wave of panic (we tend to have at least triple the panic in any other place!), I haven't been able to use the computer much.AND I HAVE MISSED YOU PEOPLE!!I just wanna catch up for a bit. What have I missed? Who's gotten famous? What did Kiteman do now? Whats the latest KNEX feud? (like I really care...) and most importantly, how has Pro been working for the site so far?Please update me, I wanna be up to speed again and start building.I hate myself, I have not managed to make anything lately. On the plus side, I've been writing a lot. I have so far: 6 anime concepts in the works, 2 screenplays in the works, and 6 sci-fi concepts.I have blogs about these, so my little internet time has been spent working on these.

Topic by Keith-Kid 9 years ago  |  last reply 9 years ago


how do i install UBUNTU's GNOME GUI into KUBUNTU ? need help.......

I prefer using UBUNTU's GNOME GUI than KUBUNTU's KDE GUI, i install KUBUNTU cuz i dunt have the CD to install UBUNTU, can someone plz help on how to install UBUNTU's GNOME GUI........im new to this OS......

Question by Major D 8 years ago  |  last reply 7 years ago



Guys who knit

I'm a guy, and I knit. Is anyone else a guy who knits?

Topic by General Eggs 9 years ago  |  last reply 8 years ago


Are there hot guys out there?

Just wonderin

Question by muddingirl 9 years ago  |  last reply 9 years ago


Meet with New Guy:

Warm wishes to Everyone, As I am new here I have no knowledge about this forum, so I would like to know more and also want to communicate with the other members of this forum. Thanks and Regards, Damacio Huang

Topic by DamacioHuang 6 years ago  |  last reply 6 years ago


Speech recognition with GUI

Hello all, I am using a raspberry pi to write a program for face recognition and speech recognition. The whole thing has to be packed in a GUI and I am using Tkinter for that. Face recognition works fine with a nice GUI and all, but when I initialize the code for speech recognition, nothing other than the speech recognition works. The code initializes everything but the Gui screen doesn't show up. Can someone help me with this?I have added a link to my code below.Code for application Thankscheers :)

Question by Bhabeshr 1 year ago


Entry of a New Guy

Good Wishes to Everyone, Let me introduce myself to this community, I am Milton James, very new to this community, I want to be a member of this forum by participating in the discussion forum and also want to share my views and suggestion regarding various topics of this forum. I hope you all will support me throughout the discussion. Thanks and Regards Milton James

Topic by DELETED_MiltonJames 5 years ago  |  last reply 5 years ago


Are there any GUI frontends to SPICE? Answered

I'd like to be able to draw circuits as in a CAD program, run the simulation and observe what's going on.

Question by UziMonkey 10 years ago  |  last reply 10 years ago


Arduino - Python GUI

Hi all, I'm using arduino for a while now. For my purposes I was using matalb to communicate with it. I want to move to python now. I started building my first python gui to control my arduino program. The problem: I'm trying to pass a sentence which contains python's entry values to arduino, but for some reason the arduino doesn't read it. The codes are written here. Arduino code #define LED 13 void setup() {   pinMode(LED, OUTPUT);   pinMode(2,OUTPUT);   Serial.begin(9600); } void loop() {   if (Serial.available()) {     char c = Serial.read();     if (c == 'H') {       digitalWrite(LED, HIGH);       digitalWrite(2,HIGH);     }     else if (c == 'L') {       digitalWrite(LED, LOW);       digitalWrite(2,LOW);     }   } } Python code from tkinter import * import serial import time ser = serial.Serial('com7', 9600)  # com7 need to be changed for linux ^%&*^$%&$%&$%^&###@@@ time.sleep(0.2) # ser.close() print('serial communication started') def pent(ard):     s = entry1.get()     c = bytes(s, 'utf-8')     ard.write(c)     time.sleep(0.5)     # ard.write(b'H')  # the b before 'H' is conversion to bytes. needed for arduino.     print("LED ON")     time.sleep(0.5)     ard.write(b'L')     print("LED OFF")     time.sleep(0.5) root = Tk() RTitle = root.title("LaserOdorPython") root.minsize(200, 200) root.maxsize(1400, 850) root.geometry("300x500") label1 = Label(root, text='Odor#\Laser', font=11) entry1 = Entry(root) label1.place(x=10, y=20, width=90, height=20); entry1.place(x=120, y=20, width=90, height=20) button1 = Button(root, text='single pulse', font=8, command=lambda: pent(ser)) button1.place(x=100, y=140, width=90, height=30) root.mainloop()  

Topic by torr.polakow 4 years ago


i sign into instructables and GUI doesn't work?

I go onto instructables and it looks like normal then i sign in and the GUI doesn't work or at least what its supposed to work like and so the page is completely white and links are blue and it was a miracle i could find this to ask this question what the heck is wrong and i have tried on many 2 different internet browsers

Question by BIGHAIRYDUDE 8 years ago  |  last reply 8 years ago


Cannot login in my instructables!

 https://www.instructables.com/id/Make-your-own-GUIgraphical-user-interface-in-Micro/ This is my instructable's link. I cannot login to my instructable, to replay to the commends, My friends also tried to login ,they also not able to follow me , or make it as their favorite  or not even vote for me in a contest. .  Kindly resolve it fast , other wise I will get failed in the contest and I'm not able to give replays to the earlier messages!...

Question by NIKHILP3 3 years ago  |  last reply 3 years ago


Arduino With GUI running on PC

Hello,       I am building a scale farm model. Said model has Flashing lights and stoplights and other flashing/non flashing Lights. (run by an Arduino UNO) I would like a GUI (Graphical User Interface) that can run on my Microsoft Surface Pro 4, running windows 10. The GUI needs to have automatic and manual modes for the stoplights and brightness control for the non flashing lights. The GUI also needs to also have on/off "switches" for the lights. Does anyone know of any projects that are on YouTube or software that already has an easy to customize GUI (or does what I want already out of the box) that is available. I am using an Arduino UNO to control. the lights are Led. I am Open to suggestions. Thx       Ian

Topic by IanL13 1 year ago


GUI game help needed

Here is my question, its a technical problem so am trying to simplify it as much as possible. So what I am trying to do might sound a bit weird. Here is image that is needed for following explanation. http://tinyurl.com/p5g88mu I want to use GUI to create a 2D game with grid of points. Now in that grid, I have some existing data point.( light green) and rest are missing ( not shown but one of the example missing point is shown in orange). Now I want to fill up all the missing data points by using a few light green points. Default case is the 4 light green points shown by arrows at the intersection of the arrows and the red and blue lines. Lets say I select a missing data point it should turn orange or red and all the light green data points corresponding to that should become dark green. Now I should be able to toggle between light and dark green data points and customize a set for each missing data point. I want to do this for all missing data points one by one. Lets say that this is the game I want to build in python GUI. I wanted to ask if anyone can help me get started. I use python a lot but never did any GUI. I looked up web GUI examples they all seem quite simplistic and no where as complex. Python is what I am comfortable with but if this can be done using some other language I am willing to try. Any help you can give is highly appreciated.

Question by Agreevedlama 4 years ago


I is back

Hi every body. I am back. 1 I just moved I'm now in Iowa. (not!) and 2 I was keeping a  low profile. but now i'm back.

Topic by jedi pen-gui-n 9 years ago  |  last reply 9 years ago


instructables doesnt work for me at all

I go to www.instructables.com ok it looks normal and dandy then i log in as BIGHAIRYDUDE then it looks like what it does below in the image what the heck is wrong and i have tried it in multiple browsers and it doesn't work

Topic by BIGHAIRYDUDE 8 years ago  |  last reply 8 years ago


Recommendations on Python GUI tools

Heya everybody; Just got permanently done with schoolin', and now that I have free time again I'd like to start making some slicker interfaces for some of the open-source design tools out there (for PCB design, CAD, FEA). I know its an ambitious project; but its a long-term goal. Tried a couple different programming languages, and so far Python seems like the most flexible and powerful. Figure I should start messing around with GUI libraries. So the question: Which of the myriad options would you recommend for GUI creation from Python? The end result I am going for is something along the lines of the computer screens in "Iron Man" series, preferably with support for vector graphics. Example of the desired style shown below. Suggestions/advice? Also, anyone interested in collaborating on this, let me know!

Question by daedalus12 8 years ago  |  last reply 8 years ago


Signs that a guy likes you?

Question by liberateme 6 years ago  |  last reply 6 years ago


Why are guys so territorial?

Ok why is it that guys flip out when they see their girlfriend even looking in the direction of another guy? its not like he owns me, so why do i get the cold shoulder every time i talk to another guy? Its not like im gonna run off with another guy so why cant he just get over it? Lolz, Are guys chemically wired to guard their girl?

Question by hannah16 9 years ago  |  last reply 9 years ago


This guy at the Bonney Lake Radioshack

I was talking to today, he wanted to build an LED circuit for a bike. I recommended instructables.

Topic by Yerboogieman 9 years ago  |  last reply 9 years ago


You guys remember this traynor?

I think some of you will remember how I was attempting to find out the specs of this traynor amplifier. Well after someone pointed out to me it was most likely for the speakers on stage that point backwards towards the band so they can hear what they're sounding like. It went away into a closet and didn't come back out till yesturday.

Topic by Punkguyta 10 years ago


New guy with a new idea

First off, Hi to everyone! I made a VU meter using the LM3914N and RGB LEDs.  My "new" idea is to create 2 modes "VU meter" and "lamp".  I can't figure out a way to do this with a single switch.  At first I though it was simple...Oh just put a switch on the 10 LEDs going into the LM3914 and send it to ground.  WRONG!   Any help would be great! Thanks! P.S.  I'm new to all this.

Topic by Natdog 6 years ago  |  last reply 6 years ago


Ever saved a guys life??

Well have you? I did write a big long thing about the four times I have, but me computer crashed so I can't be arsed to type it out again. Anyway the other day at work, I'm a bin man(garbage man)by the way, me and another crewmen were working on the back of the dust cart when my bin came back down so I turned to put it back on the curb, as I did my mate still had his back to the traffic, I saw a big nasty van screeching towards us, so I grabbed him by his neck/face and dived on the grass verge, narrowly missing getting squashed to death by two pieces of machinery, which smashed together quite horrifically. Theirs no doubt that if I was stood were I was I wouldn't be typing this now. Anyone else had something like this? I had a load of pyro stories but as I said I can't be arsed to type um out again.

Topic by Mr Slippy Fist 11 years ago  |  last reply 9 years ago


Let Er Rip guys.

I just put a new Forum up on my server. I want to see what it's breaking point is and also would find it handy to get ANY feedback from it, I know there will be a couple things astrew on my forum, but for the most part it's your average SMF forum, with a little bit of work done to it to set up the settings to my likings and changed the theme.I know there are a malicious few that will stumble across my forum link (not necessarily members on this website), but I welcome the testing of my server's security, as I also need to know of any leaks.Also, aside from the testing aspect of my forum, I welcome new users, as I would like to have a user-base of more than 5-6 people, just makes things more exciting ya-kno? I plan to make computer utilities accessible to members and guests, however all other downloads are off limits to guests, you must register, although I haven't really got much to download, there are a couple things to see in there so far.I thank any one of you's who takes time to look this over for me.However, don't try any funny stuff with my ftp access or the rest of my system, as it's set up fairly well and tight and you'll most likely get yourself automatically banned, the Apache, mysql, and php however, I do not think are completely secure, like I said, do test it out.

Topic by Punkguyta 10 years ago  |  last reply 10 years ago


what is the difference between a guy and a bloke? Answered

Hmm..

Question by popcorn4lunch 8 years ago  |  last reply 8 years ago


Is there any instructables on "sound guys for dummies"? Answered

My band has a gig coming up and a "sound guy: for dummies" would be really amazing!

Question by 9 years ago  |  last reply 9 years ago


How do you seduce a guy?

I know it's weird to ask I was just wonderin. And just please be serious when answering.

Question by muddingirl 9 years ago  |  last reply 9 years ago


whats the defferance beteen gui and cli?

Question by stew069 9 years ago  |  last reply 9 years ago


how do i impress a guy? Answered

There is this guy at my high skool and i like him alot but i dont know how to get him to notice me. any advice?

Question by hannah16 9 years ago  |  last reply 9 years ago


What do you guys think?

These are some weapon replicas that I made, I was wondering if I should post them

Topic by Hellchild 10 years ago  |  last reply 10 years ago


Guy Fawkes Mask, making it sturdy

I bought a guy fawkes mask, it's that cheap one. I am pretty sure these are the only ones available at any ease. Anyhow I am wondering if there is anyway I can reinforce the plastic/make the mask more sturdy. As well what would be the best way to cut this plastic, I tried with a sharp xacto knife and it would ruin it more then anything else (trying to make the mouth larger) Thanks

Topic by emilysnake 7 years ago  |  last reply 7 years ago


ok guys let's get started!

Ok guys let's start submitting instructables into the group and maybe even find more members. -PUMPKIN$

Topic by Pumpkin$ 11 years ago  |  last reply 8 years ago


PIC16F877A coding to interface with MATLAB(GUI)

Hello, i just to ask anyone who know how to interface PIC16F877A with GUI(graphical user interface) using MATLAB ? Thank you

Topic by esan 11 years ago


Guy Fawkes Airsoft Mask *help*

Today i asked my grandfather if he could mold my Guy fawkes mask for me so i could make a more durable version of it, i plan on using it as a mask for airsoft. He often makes molds of action figures and toys and fills the molds with pewter, however pewter is to heavy and i think to soft of a metal to use for airsoft, especially since the mold will be of a thin piece of plastic. any ideas on what i could fill the mold with or any suggestions?

Topic by jvan es 6 years ago  |  last reply 6 years ago


Can you guys help me?

I have a large piece of white fabric.I also have several squares of solid orange, pink and sheer orange embroidered fabric. I am trying to make a dress for my sister with this. I attempted to do this free handed without having a sewing machine available. I am going to my grandmothers this Sunday and she has a sewing machine. Can some one help me with a pattern for a dress that I can make before Christmas?

Topic by TheDreamer 6 years ago  |  last reply 6 years ago


Guys and gals, please bear with me.....

Those of you who know me well know I have been having a difficult time of late with things "locally", and recently things have come to a bit of a head.  So, as I appear and disappear, from time to time, I ask your forbearance in taking some of my comments with a grain of salt as I work things out in "my little world".    I AM working on a project, which I hope I can finish and finish researching how to USE it properly, within a week or two.   Hopefully this will help me out of the slump like hole I have fallen into. Sana medicus audire me ¡ UPDATE !   Slowly I turn.....Scared and sacred are spelled with the same letters. Awful proceeds from the same root word as awesome. Terrify and terrific. Every negative experience holds the seed of transformation. - Alan Cohen

Topic by Goodhart 7 years ago  |  last reply 7 years ago


Whats better Family Guy or American Dad ?

Whats better Family Guy or American Dad ?

Question by cheesemaker101 9 years ago  |  last reply 7 years ago


Do you guys sell Mechanical arm?

Question by Safa97 9 years ago  |  last reply 9 years ago


can you guys help me make this?

Question by robo_directions 8 years ago  |  last reply 8 years ago


hey guys what is the heaviest nerf gun? Answered

Hey people what is the heaviest nerf gun

Question by taowyman 8 years ago  |  last reply 6 years ago


Hi guys , how to connect this lcd with arduino

Hi guys how are youi have this lcd i do not know how connect them arduinoi need pins nameand library arduinothank you all

Question by mohamedsamo30 7 months ago


I want to modify a Guy Fawkes Mask

I bought a 10-pack of cheap Guy Fawkes mask, I want to modify them (or at least 2 of them) to make them as comfortable as possible on the INSIDE, is there a way to do so? And by what can I replace the rubber band that holds the mask to the face? Thanks.

Question by TrustMeImAnEngineer 3 years ago  |  last reply 3 years ago


I want to modify a Guy Fawkes Mask

I just got a 10-pack of some cheap Guy Fawkes mask, my objective is to modify them to make them as comfortable and useful as possible, i adding gadgets or something like that, and some kind of plating or coating inside to make them comfortable. I also want to change the elastic that holds the mask to the face to make it much more durable and comfortable. Thanks!

Topic by TrustMeImAnEngineer 3 years ago  |  last reply 3 years ago


i want a machine to make a guy invisible.

.ok guys my brother is a film maker and is working on a sci fi movie in which a guy is turned invisible by some nasty russian made device the device is a prop (of course!!) but i want it to look the business. im thinking steel box, big lights cyryllic warnings..big buttons..a launch style key....any more ideas :)? id like it to do stuff if i could ive seen one or two doomsday devices on the net.not bad, but.......... .but im thinking about briefcase size...maybe with an osciliscope in the lid..i dunno...help me o oracles of the weird

Question by maninamousesuit 7 years ago  |  last reply 7 years ago


Would you guys be able to tell me...

What's wrong with this iTouch? I can and will get pictures of all the insides. Im already getting a replacement screen, but I tihnk I need a new battery. The LCD screen is perfect. THe digitizer (plastic or glass front) Im getting a replacement for, but I think i need a new battery. THe iPod wont: Power On Show any screen Nothing happenes at all. What do you guys think?

Topic by wolf555hound 10 years ago


How to Construct a GUY Daft Punk Helmet?

Hey guys, I was wondering how you would build a GUY Daft Punk helmet out of a motorcycle helmet. I have purchased a really nice motorcycle helmet for $30 and I started last night to make an outline of the golden frame that surrounds the helmet. I was planning on making this out of cardboard, and then after measuring it to make sure it fits the helmet precisely, covering it with Bondo. Once that was done, I was going to construct the plastic visor, which is where the trouble comes in. Does anyone have any suggestions on how that visor can be made? I have no idea how to do vacuum form, which is unfortunate. Any answers would be appreciated. Thank you.

Question by Jockeydude818 9 years ago  |  last reply 7 years ago