I have obtained an empty ammo box. I don't have any guns. So besides being a totally rad lunch box, what else is it good for?
Question by Bardouv 9 years ago | last reply 5 years ago
On thing that makes any K'NEX gun replica more accurate is the magazine. Trust me, if your magazine is to big or to small, it will make the whole gun look bad. As this is the case, I decided to "clear up" the small argument about the size of 5.56 NATO magazines, as some people are incorrect on the size of K'NEX magazine that they use. As you see in the pictures below, TD's magazine (yellow connecter - white rod - yellow connecter) is more accurate than the other type (white connecter - green rod - white connecter). The latter version (white connecter - green rod - white connecter) is quite a few centimeters too long, and is more accurate for some 7.62x51 replica K'NEX guns. The last pic is of my Dad's Bushmaster Carbon 15. -The Red Book of Westmarch
Topic by The Red Book of Westmarch 5 years ago | last reply 5 years ago
Contest rules says: "THE CONTEST IS OPEN ONLY TO NATURAL PERSONS WHO, AT THE TIME OF ENTRY, ARE REGISTERED MEMBERS OF THE SITE, WHO ARE AT LEAST FOURTEEN (14) YEARS OLD (FIFTEEN  YEARS OLD FOR RESIDENTS OF NORWAY AND EIGHTEEN  YEARS OLD FOR RESIDENTS OF GERMANY), AND ARE LEGAL RESIDENTS OF THE 50 UNITED STATES (INCLUDING THE DISTRICT OF COLUMBIA BUT EXCLUDING PUERTO RICO), CANADA (EXCLUDING THE PROVINCE OF QUEBEC, CANADA), UNITED KINGDOM, AUSTRALIA, BELGIUM, CHINA, THE NETHERLANDS, COLOMBIA, DENMARK, GERMANY, INDIA, NORWAY, OR SWITZERLAND." So, I just want to ask, why citizens of Poland cannot participate to contests? I'm sure, there a lot Polish, who made something nice and would show his/her project in that way. Poland is in EU, NATO, it is not so bad country (until you live there, eh). Our politicians sucks, thats a fact, but there are a lot creative young people, let them show, what they can. Regards. p.
Topic by cube000 6 years ago | last reply 6 years ago
So Dr. Richy posted his CAR which drew a little inspiration from this weapon that I posted on Red's wall in hopes he just might be able to turn it into a firing weapon. However, as I suspected, that's just not an easy task and I didn't expect it to happen. So I'm gonna just throw this out there and show anyone that didn't see it. It's made to be convincing, it could probably be turned into a real firearm. It's a bullpup designed to take 5.56 NATO rounds. I designed it to be somewhat ergonomic and compact. It has the front grip from...I don't even know how long that I used on my UMP. It's pretty simple, reasonably comfortable, and lets you quickly attach any front grip or bipod you can come up with. The muzzle was made from a new concept for a rounded barrel that could be used as a real K'nex barrel. This can also take a very cruddy and simple silencer attachment (which is actually just my Master Sword handle that I never wanted to disassemble). Then I added a basic rail on top that allows it to take airsoft or real rail accessories. It's not perfect, but you can get the accessories to grip into the grooves. I added a fake charging handle that is located in a decent, but not optimal position. This flows into a cheek rest of sorts that's rather close to the back of the gun so it can accommodate the charging handle pin. Your head is kinda cramped against your shoulder, but your face itself is comfortable aiming. And the front sight is detachable if you were to add a rail sight. I'm thinking I'll probably make a new one tonight for fun. It'll be shorter to be similar in size to a PDR. However, I might (not a definite) give it exchangeable fake barrels based on this one that allows it to lock in with a single pin. Secondly, I'm going to change the front to include an integrated folding forehandle that will also be comfortable to hold folded. Or so I hope. I'm also going to move the charging handle forward and make the roof one and the same with the rail to slim it down ever so slightly. This will also move the cheek rest forward to a more accurate position like on Dr. Richy's. Finally, I hope to add some nifty features but I'm not sure at all on these. One would be a bolt lock which probably wouldn't be too hard. It'd basically be like the charging handle is a firing pin and the bolt release would be a trigger, just mounted differently on the gun. And then the harder one would be to make a magazine release near the handle like on a PDR instead of the current one I use that makes you have to "strip" the magazine. On a real gun, this would be a great feature for making reloads a lot faster.
Topic by TheDunkis 5 years ago | last reply 2 years ago
I haven't used the eyeclops night vision 1, so I can't make any comparisons. From the photographs, you can see two sets of lights on either side and a ring of leds around the camera lens. When in low power or "stealth" mode, only the lights on the sides are on. In the dark, the glow very dimly, you have to be 3 feet or less to see them glow and it's still very dim. When in long range mode, the lights on the sides turn off, replaced by the circle of lights in the middle. These are clearly visible at close range, even in daytime, although still with less intensity as a red led. The knob toward the eyepiece is for adjustment of eye. I don't see what it does. The knob on the end near the camera adjusts focus. Seeing things at long range clearly and close range clearly require different adjustments. It's real infrared technology. You can switch between "military" and "spy" The difference between "military" and "spy isn't much. One of them is normal, infrared vision, and the other applies a green layer, making it seem like the view from COD. The 6 knobs along the middle don't do anything. It uses 7.5 volts using 5 AA batteries. There there is only one LCD, despite it claiming dual LCD technology. The skirt on the eyepiece is detachable. The strap feels pretty cheap, I plan on making it into a head light sort of thing later with paracord or elastics. Objects appear closer and you have no peripheral vision though. The latter problem is something all night vision goggles have. Overall, it's not a bad deal for a $50 toy. The most annyoing thing is that the dials are a bit loose, so running or shaking them makes a rattling sound, giving away your position if you were doing covert sneaking around or playing a prank. This is useful for scanning an area in the dark without revealing your location. It's also useful for night spying. What this toy cannot do is read words or anything in detail the size of words. Although navigation is possible, the lack or peripheral vision is a problem. Possible Mods: Add an airsoft or rc car battery to replace the 5 AA batteries. The half near the eye piece can be cut off I think. You would have to add a new compartment for the batteries though and the light from the LCD would leak out. I would add a strap of two so you can use it hands free. I would also attach a smal telescope or lens backward so objects appear normal distance. The peripheral vision problem could hypothetically be solved the same way people make DIY fisheye lenses. Extra infrared LEDs flashlights and other lights could be added around a house, allowing you to cover up the lights, not exposing your position. Another idea is infrared led throwies. They would function like NATO infrared glow sticks, allowing people to track a certain target or where to fire.
Topic by starwing123 9 years ago | last reply 9 years ago