When I pull up an instuctable and try to veiw the instructions there is nothing there and there is other blanks on the screen
Question by 45acp 6 years ago | last reply 6 years ago
Is anyone else getting this problem? I go to the main site, www.instructables.com it is snow white, no text no pics, nothing. The only way I could get here was to google instructables and click on a link to a part further inside the site.
Topic by jack002 6 years ago | last reply 6 years ago
The screen on my hp ze4900 lap top is very dark. I can still see it a little but not very much. Is my bulb or is my inverter going out or is it something else. I did not hear a hum and I am not sure about a red glow. I can still see the screen a little but it is very difficult to see. If I shine a light on it I can see it or if it is very dark I can kind of see it. I know there is a "how to take the bulb out and fix it in instructables" but I just wondering if it might be another thing? Also, how do you take the screen apart on this model? Thanks, Carmitsu
Topic by carmitsu 11 years ago | last reply 11 years ago
I have to go to you>instructables>published (or unpublished) and select "edit" there if I wish to edit an instructable of mine FF 3 in Ubuntu.
Topic by Lithium Rain 9 years ago | last reply 9 years ago
I am needing to make a gun prop for a contest, However I am not allowed to make any smoke.... Help? Thanks
Question by KyleofAsgard 8 years ago | last reply 8 years ago
When I tried to access this 'ible from my email, all I could see was a balnk white screen. Same result when I went to the user's page. and when I click on HELP. I was able to see the T rex 'ible w/o signing in and everything after I signed in. Design and Build your own Pinhole Camera by mattthegamer463
Topic by ArtisanEclectic 6 years ago | last reply 6 years ago
Everytime I log in and than view any item and want to download a PDF I am sent back to the login I re login and again same procedure over and over. I paid to become a member and so far I have yet to be able to use the site and am beginning to get upset. Not only does this happen nonstop but when I try to use the search it begins to search and than the screen goes blank with nothing left but my browser header, Why does this happen? I did not have any of these problems until I paid for a membership and now I can no longer use the site. I feel as tho I need to request a refund and forget about the site. Can someone tell me why this happens? I have XP Pro & normally use IE8 but have also downloaded and tried using mozilla and I get the same results constantly being told to login and a blank white page when I try to do a search...UGH Thanks for any help on this matter,, and hope I placed it in the right help section. Terri
Topic by ladysav 8 years ago | last reply 8 years ago
I just signed up today and I was trying to click some old instructables that I searched and found, but they all load a blank page when I click. What gives. Below is the main one I was trying to get to. "Make a Server Out Of An Old PC"https://www.instructables.com/id/EQW2JY5F4REC0KI/
Topic by thedonn 11 years ago | last reply 5 years ago
I went to look at one of my topics I posted. It took me to a blank page with nothing on it. I tried with a different topic. Same thing. I tried with all the topics in the first page of the "life" category. Same thing. I tried clicking a reply I got on the topics. Same thing. I'm using the newest version of Firefox, and Windows Vista if this helps anything. *Edit* the problem seems to have disappeared for now, but it's still odd that it happened in the first place.
Topic by DJ Radio 9 years ago | last reply 9 years ago
The Gateway logo and energy star emblem still come on the screen then after few seconds goes blank. When I unhooked from PC and hooked up to the HDMI input from satellite I saw nice picture for about three seconds then went blank and haven't been able to do it again. none of the inputs (HDMI, RCA, VGA, DVI )produce picture now except the Gateway logo and energy star emblem at start up. and the power button lite turns green from orange and menu buttons lite up then all go out as though no signal coming in.Model = gateway hd2200
Question by clownalex 10 years ago
My 17" Gateway flatscreen went blank this morning while I was at meeting. My wife claims she didn't do anything.....that it was blank when she saw it. It was not in sleep mode, nor was a screen saver on. I noticed the "power button" which is normally green (power up, with computer signal) or amber (powered up w/out signal), would not come on. I attempted to see if any of the adjustments on the side might have been bumped, no effect. I tested to make sure there was power from the surge protector (switched power outlets after a shut down) to no avail. After my 4th reboot, I subbed in my old monster sized 17" CRT tube monitor, and it works fine. Resolution is different, but it works.....but that pushed the monitor about 2 feet closer to my nose then I would like (it is about 10 inches from my face. )Did I miss anything as far as testing the monitor before replacing it? I personally think the PSU in the monitor went on the fritz, but I am open to suggestions. EDIT: The old CRT is now back ni it's storage area, and the newest LCD screen is up and running.
Topic by Goodhart 10 years ago | last reply 10 years ago
I want to make my own surfboard. I plan to make a 5' 9" - 6' 0" sized shortboard. I've looked into several surfboard blank manufacturers such as US blanks and others. I wanted to know if anyone else knows of any good quality blanks (quality is key).
Question by pucksurfer 4 years ago
Hi people, does anybody know, how do this bloody thing work? I do understand the timer one. It's quite simply, based on classic time fuze design. But what's still mystery to me is this impact version of that. How did they made grenade exploding when it hits the ground? Any idea?
Question by FireCrier 6 years ago | last reply 6 years ago
Hey, my instructable [id/How-To-carve-A-Maori-Hook-Pendant-Video/] is broken and displays only a white page. This happened immediately after i made some edits to the content. Whatever occurred also wrecked my ability to view my list of published instructables, it just displays another instance of instructables inside of itself instead of the list. I've sent an e-mail to fungusamungus, but have not heard back yet. Hopefully someone will be able to help (This entry is in a contests) thanks, -Calvin
Topic by nepheron 7 years ago | last reply 7 years ago
I know there are many places online to buy boards for 2$ or less but shipping to Canada can be upwards of 8$. Anyone know a good place for Canadians to buy blanks. I imagine making your own blanks would be too difficult, hopefully someone can correct me on this. Thanks
Question by A_Sab 9 years ago | last reply 9 years ago
Bought a pretty cool lighter but i want to add my own design to its pretty boring case.
Question by hulma 10 years ago | last reply 10 years ago
Recently i tried to dual boot windows 7 and Linux. I burned the linux iso to a cd, and installed it. While installing it, something whent very wrong and whipped out all of windows 7 and Linux won't work aswell. I don't have the windows 7 reinstall disk with me. how can i recover my blank computer? EDIT: I did obtain the laptop legally with windows 7 already installed. However, it did not come with a recovery disk. I downloaded a windows 7 recovery iso and burned it to a dvd using imgburn. it worked fine but then asked me to "provide a backup image you created earlier". I didn't make any backup images prior to this. Can i download a backup image someone has created earlier? please help!
Question by AllenB94 8 years ago | last reply 3 years ago
What modifications are needed to allow a semi-automatic pistol to fire blank ammo? The reason I ask is that on various film prop sites I have come across a photo of a gun, ( for an example see accompanying image), and the phrase, "Note how the gun has clearly been blank converted." I can guess at the reasons but does anyone know? (Don't even bother trying to google this.. .you will get thousands of pages on how to convert a blank gun to fire real ammo.) This is from the film, Heat. Thank you.
Question by FriendOfHumanity 9 years ago | last reply 4 years ago
I have a acer aspire 3680 with vista pre installed on it. the hard drive has a problem, when i boot it jams right before the login screen (black screen) when i try to boot in safe mode the loading stops at crcdisk.sys then jams. i have tryed putting the harddrive of my other laptop in it(vista), and it works perfectly (boots and everything) so i target the hard drive. i want to install windows xp on it but when i boot the computer from the cd it says: it cant find something would it work for me to take a laptop who has windows 7 on it, remove the hard drive put the one from my acer on it boot it and install windows xp on the acer drive while in the windows 7 laptop without damaging anything on the windows 7 laptop?
Question by pbergeronronronron 7 years ago | last reply 7 years ago
What the crap instructables???? I cant see frieking pictures on stuff! It shows the thumbnail but its blank when you click on it!!! FIX IT SOON!!!! Fellow instructable members, Reply if you have the same problem, maybe then instructables will notic somthing wrong.
Topic by gassybeans 7 years ago | last reply 7 years ago
I'm trying to edit an old instructable that was made back when "photo instructables" were a thing. When I try to click on the edit button, the page goes blank. Here's a link to the i'ble. Any help would be greatly appreciated!
Topic by Sadi789 3 years ago | last reply 3 years ago
Www.instructables.com/id/Lithium-Rain-Radiant-Beacon-of-Righteousness-Blin/ Previously embedded youtube videos are missing. There is a blank space where the video widget should appear in the instructable. 2 videos are missing. I also had embedded a video as a comment in forum topic "Why" and that embedded youtube video no longer appears. The comment appears as a blank space. XP, bug appears in IE and Safari. update: FIXED. I needed to uninstall flash player and install latest flash player. Security settings to allow video to run only on external programs seems to have been reset/changed in IE8 browser options.
Topic by caitlinsdad 9 years ago | last reply 9 years ago
As you can see in the screenshot, I can't see the new instructables posted by the members I'm following anymore. The section is just blank and the only way for me to see the new ones is to click on "view all". It's been this way for the past 2 days I think. I'm using Chrome on Win 7, but I tried to look at it on Firefox too and it shows the same problem.
Topic by lindarose92 4 years ago | last reply 4 years ago
Ok so i started my first instructable and everything is fine up until the point where i add another step and then I can't delete it so, i decided to add another one and then delete but now I ended up with 2blank steps!!!? wtf face!!!! '.' P.S sorry about the category I just had to pick one !:P
Question by Viliana N. 7 years ago | last reply 7 years ago
First image shows the missing blank lines in the published instructable. The second image shows what I actually entered in the editor. I'm on Windows 10, using Chrome Version 46.0.2490.80 m The project with this issue is here: https://www.instructables.com/id/Halloween-Fake-Fire/ I think the reason for the bug is because I want to put a spacing between bullets without creating bullet on the blank line I pressed SHIFT-RETURN instead of RETURN. Somehow it SOMETIMES mess up because as you can see other lines above and below it works fine. Feel free to contact me if I could assist in debugging / testing. Thanks!
Topic by HariFun 3 years ago | last reply 3 years ago
Hi y'all! I need a little help. I'm trying to fix my uncle's laptop. It is a Compaq Presario v2000 Laptop. It will not turn on or show any lights on the front(e.g charging, power up, ect.). I have tried blowing out the motherboard, removing and inserting the battery, and testing the DC power jack with a voltmeter. Any help will be appreciated!
Question by joespicnictables 7 years ago | last reply 7 years ago
Question by rbb555 10 years ago | last reply 8 years ago
How can I put my own simple image or text on a blank silver band ring?
Question by BriniBoop 6 years ago | last reply 6 years ago
Question by lajefa100 6 years ago | last reply 6 years ago
I am making a small gun for a R/C tank i am building. i want it to shoot .22 rim-fire blanks too make it well...awesome. is there any way i can do this with materials such as aluminum or copper? or does this have to be made from steel to keep the pressures from breaking the gun. also, is the force from a blank the same force as a regular bullet.
Question by myakka 6 years ago | last reply 6 years ago
I would like to know this for informational purposes next time I open up my PC just to fix a few hardware problems. One of the RAM chips on my PC didn't want to work, so I decided to open it up and clean the contacts (which were covered in enough dirt to stop all connections). So I did so, and when I put it all back in and booted it up, all I see on my LCD screen was nothing, absolutely nothing. I tried reseating the video card. I tried reseating the RAM chips. The only thing I didn't try was to clear the CMOS memory, but I was afraid it would make things worse since I have a tendency to touch other components. For all I know it can't be the CMOS memory, but I can't be sure. I do know I accidentally touched the video card out of nowhere (no ESD). That video card I touched has a reputation of taking more than 10 attempts at it to make it work, so I might have moved the contacts out of place, so I reseated it. It still doesn't want to work. I do know that my dad knows the problem, so don't tell me to bring it to a computer repair shop which will raise the price needlessly anyway. According to the LED's at the front, the CPU is going at it. I just want to know what to do and what not to do (aside from the usual ground yourself, don't touch other components drill) so that I don't mess it all up all over again. I'll go have another shot at restarting this... Might be the cable from the monitor to the PC...
Question by nutsandbolts_64 8 years ago | last reply 8 years ago
Purchased a Dell Latitude D410 with Windows 7. Even though I have set in Settings to "DO NOTHING" When LapTop Lid is closed, when open the lid back up, the screen stays blank. Only way to get it back is to force shut down. Anyone know of a fix or workaround?
Question by keydogstony 6 years ago | last reply 6 years ago
I just need a source for blank belt buckles. One of my customers want me to do them, in addition to making jewelry.
Question by maybetty 9 years ago | last reply 9 years ago
Question by Nickelplate 10 years ago | last reply 9 years ago
I'm making a pedal board/road case with a buddy of mine. It's in its early stages, but it will consist of a pedal board and lift-away lid, covered in tolex with metal corners and such. I'd like to put some sort of small name plate or logo on the front end of it. I've found a blank switch plate cover, normally used to cover up spots where light switches or power outlets used to be, and by some means apply a logo or text to it. It's about the size that I'd like the logo/text to be anyways. I guess I could go and print a sticker and call it done, but I'm looking for a way to make this more permanent. It will be on the outside of what is essentially a small road case, so it will be up against the elements. So I guess if there was a good way to print off a design and put a layer of something over it so it will stay in place, possibly be shiny ( :D ), and be protected from the elements, I'd be all set! For the sake of aesthetics I've decided whatever plate I get, it will be some kind of metal. I've found brushed aluminium, stainless steel, and chrome.
I have installed windows vista on my psp now when i start my psp it shows blank black colored screen now what i do guys please help
Question by arpityadav189 6 years ago | last reply 6 years ago
I dont want to pay $70+ for a body blank, do they get just a big piece of wood or do they get 2 pieces and joint them togather?
Question by rbb555 10 years ago | last reply 9 years ago
Cannot load: https://www.instructables.com/id/Zippered-Face-in-Photoshop-Graphic/ Just loads to a blank page for me....
Topic by SuddleD 6 years ago | last reply 6 years ago
Question by AccidentalyPsycoticx 3 years ago | last reply 3 years ago