Can anyone please tell me if i need a special kind of drill to drill the holes in the box. I was asking because isn't ABS a type of plastic???
Topic by f5ive32 12 years ago | last reply 11 years ago
Hi everybody First of all I want to excuse myself if my english is not perfect. I have a project in mind for a while. I work on construction in Canada and using caulking everyday it get hard to use it during winter if we don't have access to put them inside. So I wanted to build a little box with an heating system that could work on a jobsite generator. I'm thinking about a plywood box nothing fancy as long it work. I though about place 10 ABS/PVC tube that fit perfectly the caulking tube with alots of hole in it so the heat can pass throught it. So the caulking tube can be reached right from the top of the box and due to the hole it won't overheat. So that's the idea so far. What heating system should I use for this system(I don't want to spend alot on money). Maybe I'm thinking about 1 or 2 computer fan to make the heat uniform. I'm thinking about a space where I can put my spare glove to get them dry do you have an idea for that ? And finaly I'm open to any suggestion that can get the box even better ! :) Thanks you
Topic by Lufkum 4 years ago | last reply 3 years ago
Here is the video of me playing rock band with a real guitar https://www.instructables.com/id/Play-Rock-band-2-with-a-real-guitar-and-boxing-glo/ I hacked an xbox rock band guitar controller and ran a wire from ground to the strings of the guitar, and then one wire for each of the fingers on my left hand. I made a little tin foil "hat" for each finger, and even though it worked great for controlling the game, I didn't feel like I got enough controll of which string I actually pressed down. For playing the game it is enought to just put the correct fingers on the stings, but what I wanted to do was to actually play along with the tunes in rock band to the best of my abilities, to actually have cool sounds come out of my real guitar. But what I'm looking for are suggestions on how to make the finger contacts better?
Question by mskogly 9 years ago | last reply 9 years ago
Hard drive data recovery costs hundreds to thousands of dollars, which just isn't worth it for most things.Sometimes it's possible to fix a dead hard drive by replacing the controller board with one from an identical model (make sure every model number, part number, etc is identical). Some people have success with freezing the hard drive.If there's a mechanical problem, though, you can't just take the hard drive apart and fix it, since it's very sensitive to even the smallest particles of dust or contamination.I've heard of people (with not much to lose) taking the drive apart anyway and successfully repairing it, or even adding a plexiglass window and (apparently) using the drive afterward. Somehow I doubt that this one was still usable:http://www.grynx.com/projects/plexiglas-harddrive-window/I've heard that you can make a makeshift cleanroom in a bathroom by running a shower for a while to clean all the dust out of the air. It seems like it would be a lot easier to just make a glovebox out of a clear tupperware and create a clean room environment inside it.Has this been done? What would it take?http://www.tomshardware.com/reviews/saving-data-a-head-crash,1044-4.html
Question by endolith 9 years ago | last reply 8 years ago
Are there any good instructibles on glove boxes?
Question by Xenophile 9 years ago | last reply 8 years ago
I recently had a great idea for a completely useless, yet hilarious project for me to work on, but I am stuck on a single piece.The end result is a joke device that uses one of those accordion, spring loaded boxing gloves controlled over USB (the idea came about in a discussion over the universal wish to punch idiots over TCP/IP). To understand what this is, you'll have to think slapstick comedy and saturday morning cartoons (of the Wile E. Coyote variety). It sort of looks like this but replace the lamb with a boxing glove, and when extended looks like this: XXXXXXXX. Imagine the coyote opening a door that he expects the Road Runner to be behind, and out pops a boxing glove on an accordion arm that hits him in the face, making those little roadrunners circle his head.I suppose I could make one out of some material (metal, plastic, wood?) but I don't have much in the way of fabrication facilities in my new apartment. The best outcome would be if I could get such an arm off of an existing device.Sure other things could work (a piston for example), but the look of this project is very important and an accordion arm is a requirement to that end.Any idea on how to go about building/obtaining such a thing? I can't even figure out what to use as search terms.
Topic by opqdan 12 years ago | last reply 10 years ago
There's a picture of it incase you all don't remember http://1.bp.blogspot.com/_dClyRtJqc88/TArpZtKGKcI/AAAAAAAAAHU/dG-IFCWLgPY/s1600/DAta.jpg And heres one of the features http://www.retroist.com/wp-content/uploads/2010/08/inventions-data-goonies.jpg Would love to hear back from someone who's also a big Goonies fan!
Question by joe375 8 years ago | last reply 8 years ago
Hello Everyone... We Have Some Piezo Plates And Wanted to connect them parallel or in series to make a circuit that makes energy to charge your phone... We want to use them in boxing gloves or something like that to get sufficient energy to charge a phone.... Our Piezo plate has 3 wires as shown in the image... Please provide a circuit diagram also.... Thanks for your help....
Question by Mr AbAk 4 years ago | last reply 4 years ago
Hello fellow followers of the 1s & 0s. Here is my idea. Everytime I travel my wife or I forget to update or profiles in the cellphones so we burn battery. I run waze, bluetooth streaming of Sirius Radio streaming as well as background syncing which kills the battery faster than it can charge. So here is my idea, Buy an Ankor 1200mAh battery backup/charger and hard wire it into the glove box so everytime I run the car the charger is getting topped off so I can use it either while driving or if the Zombie (more likely sunspot) apocalypse happens. Everytime my phone needs a charge my wife's phone decides it needs attention as well. This way I have 5 ports, ALL SMART, that I could always have ready. What do you think? Any reason I can't do this or shouldn't? Seeing that my Vibe has a 2-prong household-style plug on the instrument panel by the glove box, I'm thinking it should be an easy thing to wire. My only issue is the plug is rated 115volts, 100w, 1amp max. Not being an electron spec ialist I'm guessing it is too wee to power the brick battery. PS. If you were thinking of getting a new battery backup I love the one listed above. I appreciate all your help! @IdeaJason
Topic by GuruJason 4 years ago | last reply 4 years ago
At first the fan would go on and off now and then if i hit a speed bump or a mud puddle. if it wouldnt come back on i could open my hood and slam it back down and the fan would start. now my fan quit working all together. i have tried to look for loose wires under the glove box and to check fuzes. i checked the fuzes under the hood and when i was looking under the glovebox (as well as possible) i noticed 2 more fuzes. do u think this is a loose wire or fuze problem or a burnt heater. whats the best way to get to the heater fan. and where is the fuze located
Question by robinreise 9 years ago | last reply 9 years ago
I've always thought that it would be cool to have more than one cell device on my specific account. (no, not like a family sharing plan). Let's say, I want to keep a spare phone in my glove box, on a trickle charger, so that I always have a working phone in an emergency. Let's say you use your cell phone a lot.. Instead of swapping out exhausted batteries, what if you had a second phone on the charger that you can switch to whenever needed. Is it possible to clone your telephone, so that you can have a spare device. If you are paying for the service, and you can only use one of the phones at a specific time, why would the phone company care? I have 6 old phones from which I upgraded. They all work fine, and could make great spares if there was a way of programming them to work on my account. Can the MAC address / serial number be cloned to an old phone? J.
Topic by John_the_Builder 5 years ago | last reply 5 years ago
Hi, here I have a common gas igniter like this: http://s10.postimg.org/r55cvgt9l/gasigniter.jpg Well, I removed the circuit from the box, then I shorted the two terminals, using various kind of coils (thick wire, thin wire, in various configurations and with different turns), but seems that this circuit is unable to generate electromagnetic pulses; I've tried to turn on a fluorescent lamp, to cause interferences to a pocket calculator (as I can see in various videos on youtube), but nothing happens. If I remove the coil from the terminals I am able to get nice sparks. So, why this circuit won't work as expected? I miss something? However this is the circuit: http://s4.postimg.org/fgd78werx/ignitercircuit.jpg Please note that I'm aware of the fact that these kind of circuit could be dangerous; I'm taking all possible precautions (I'm using it far from any electrical device, I'm using isolated gloves, and so on). I just want to make this circuit for fun. Many thanks.
Topic by akopelumenuscu 3 years ago | last reply 3 years ago
First, you'd have to be very careful not to cut yourself (a leather glove to hold the piece helps). If you print the pieces for a cardboard model, instead of cutting, it'll look better if the pieces are sliced. These are the steps that I take: 1. After printing the models, I cut the pieces leaving 1/8 to 1/4 white space along the edges. 2 I use 12/24 pack cardboard from soft drinks (the cardboard from hot pockets works also, but its harder to cut) 3. use a glue stick to transfer the pieces to your cardboard and roll any round object to remove any bubbles. 4. when dry use a pair of scissors to cut the pieces. 5. lay the template face down on your material and use a pen to trace the outline. if using cardboard, use a box cutter blade and slice the parts out, slicing to the line of adjacent pieces. For slots, cut the width thru the cardboard, and slice the required length. Use an exact-o knife to cut the ends, flip over and trim. I've built over a dozen models and my three grandchildren love them.
Topic by yauco 6 years ago | last reply 6 years ago
Hi, I've been trying to add a LED light for my glove box, since it didn't come with any. I bought one radio shack led with built-in 1/8w 680ohm resistors to see how it was made. I read the 1/8w resistor wouldn't work and it would burn up? Using something like 1/2w would be better. I tested it with a 9v battery and I didn't feel it getting hotter. Maybe just warm? I got some LEDs off ebay many years ago and I have no idea what their specs are. They are 3mm led bulbs. I decided to make my own by using 5 1/8w 150ohms resistors. 150 ohms are the only resistors I have on hand. With the combined resistance of 750 ohms, how much voltage is going to the LED? Will I be fine with just using 4 150 ohms resistors? Will is be dangerous to use the 1/8w resistors? I don't want a fire. Will having more resistors also help spread out the heat among the resistors? I drive 4 hours a day, so the light will only be on for that duration. Thanks
Question by RoboRay 6 years ago | last reply 6 years ago
I have a 2001 Nissan Maxima that I intend to customize just a little (well, a lot). Recently I was at a garage sale and bought a 6 disk CD changer for $1. I'm hoping this was a worthy investment since I want to install it in my glove compartment and wire it into a custom stereo system. That's all fine and dandy, but step one is to figure out how to reverse engineer the proprietary control systems. Eventually I want the air condititioning, stereo, and this 6 disk CD changer to be interfaced to a computer with a big ole touchscreen in the dash. I'm going to need to do a few things: 1. Figure out the wiring for the 6 disk CD changer so that I can power it up, control it through the computer, and connect it's audio output to my car's speakers. 2. Figure out the wiring for the air conditioner so I can control it with the computer. 3. Get a touch screen that fits in the dash (I'll measure it later), that I can use with a computer with (relative) ease. These are my goals for right now. If I can figure this out, I will be ready for the next phase, actually installing the new dash. If anyone can recommend any sources to learn more about basic car work, that'd be helpful too. I'm used to computers. The lid comes off. Screws are all easily accessible. Parts don't weigh more than I do. I know where everything goes and what everything does inside. Since a car is so proprietary, and such a new field for me to be working in, ANY resources would be greatly appreciated. How do I figure out how to take things apart in my car? FYI: The disk changer is marked with part number 39115-s3v-a011-m1 Update (18 August 2012): I added some pictures. The connector I am holding is the only connector that comes out of the box.
Question by meztek 6 years ago | last reply 4 months ago
[edit: this isn't real, but it would be awesome] In the interest of helping out our amazing community of authors, we’ve decided to make all of Instructables available for download in a single PDF document. That way when the EMPs hit or the grid goes down, you’ll have all the chicken rearing, solar paneling, rain barreling, wind turbining, and urban farming resources you’ll need. And because we’re including everything, you’ll also be able to stave off the post-apocalypse blues with bacon roses and unicorn poop. We’re putting all 127,000 Instructables projects into a single omnibus edition that will be sold at cost (TBD) to Instructables authors and for about $1000 for non-members. We’ll also make the PDF available to Pro members. If you’re so inclined, you can print and bind your own version. Get familiar with KaptinScarlet’s “How to Bind Your Own Hardcover Book” Instructable. We found a spectacular publisher who’s willing to bind the pages with paracord and baling wire. This edition should have just about 30 meters of paracord in the binding, along with just enough baling wire to keep the whole thing together if you choose to take out the paracord. The publisher also agreed to include a metal shank in the spine that can be fashioned into a makeshift knife, shovel, or bottle opener. The book is big enough to make a pretty nice counterweight for a small trebuchet, too. There were a few challenges for this publication. First of all, there’s an awful lot of content. To keep the print length down, we used small images wherever possible. We also cut the comment sections and individual project tables of contents. We did, however, keep the advertisements in the margins just in case AdSense will pay out during the End of Days. This publisher did balk at including packages of strike-anywhere matches in the book jacket. Sorry everybody. Matches were deemed “too unsafe” for their production and distribution teams. As though a conflagration of Amazon packages in the back of a UPS truck is less safe than losing a few digits to a frozen post-apocalyptic hellscape. The biggest challenge of all, though, was the sheer size of the book itself. The rough draft weighed in at about 500 kilograms. In a lucky break, using that ultra-thin biblical/lexicographer paper stock allowed us to cut the weight to just 220kg AND to make the pages double as bathroom tissue in a Charmin-less world. The tome will require a licensed forklift operator to receive it (or you can choose to pay the $150 white glove installation surcharge.) And, as usual, we cannot ship to a PO box.
Topic by wilgubeast 5 years ago | last reply 4 years ago
stage 1 ok, so i have begun.the Blucky i chose to work on is a bargain basement Blucky, literally. when i made the trek to the Spirit Store and Party City last October, i happened upon some marked down Bluckies. they were 10 bucks, and not guaranteed to not fall apart in the store, lol. so i got a buggy and picked up a couple of them. the cashier pointed out that they were defective, did i still want them? of course i did! 10 bucks instead of 12, for something that i'm going to probably screw up anyway...so the 1st order of business is to fix the defective joints. i decided to disassemble it, and fill the bones with spray foam insulation. then re-assemble. hoping this will meld the pieces together well, and add a little weight. nothing looks faker than a Blucky blowing in the wind!it is laid out on the counter at the shop. the customers kept giving me strange looks.. can't imagine why! so i figure the excess that is oozing out can easily be trimmed away. i do have a back-up plan in case the spray foam won't hold firmly enough. it involves hot glue. hopefully it won't come to that though... the panty hose i plan on applying next should bind things well.STAGE2so today i began stage 2 of the Blucky. cutting his arm and leg bones to more closely resemble an actual body. i used my Dremel, and a razor knife to trim them up. i made a HUGE mess, and had fun. i'm sure i didn't do such a great job on this, but it is my 1st time. STAGE3so today i tackled stage 3 of teh Blucky corpsefication, carving the skull and ribs.ummm. it is MUCH harder to do the ribs than the skull, let me tell you! the dremel tends to 'get away from you' on the long curves of teh ribs. my carpal tunnel didn't help matters any, either! it's kinda crappy looking in fact... i am rather disappointed with myself. luckily they wont all be visible after the pantyhose goes on! the teeth proved to be difficult too. Danny said it looked fine, though. i do have some pics somewhere...we went to Lowe's last night and got some carpet latex to coat it with. the girl in the flooring department thought we were crazy at first, then warmed up and was interested in our projects and plans. she wants us to bring some pics by in fact!here are some of the how-to's i'm using as inspiration:http://hauntforum.com/showthread.php?t=8659http://www.fulcrumsites.com/haunt/html/corpsification1.htmlhttp://skullandbone.com/tutorial_02.htmiam kinda mixing and matching techniques. i'll be using paper towels or toilet paper, pantyhose, cotton balls, great foam, maybe cheesecloth and various colors of stains/paints.the hair my Blucky will have is Grade A. i had my long hair cut off, and instead of donating it this time, i plan to utilize it. the hair dresser kept asking me if i was sure i wanted her to cut it, she said it was "beautiful and so healthy!" i imagine i'll have to distress it little so it will look like it belongs on a rotted corpse. LOL!!!!i'm wondering... does anyone ever put remnants of rotten clothing onto their Bluckies they corpsefy?STAGES 4 & 5ok. so i worked on Blucky today at work. first i taped up the arm and leg bones that i had cut out with the dremel. this is probably a useless step... but i think i was trying to stall actually getting going with the scary part- the latex.i used some masking tape i bought at wal mart in the paint department. then i applied the pantyhose. this part caused customers to stop what they were doing and come watch. Josh and I struggled with it until we got 1 set on the right way, and one set on upside down, covering the arms and head. we overlapped the torso with both sets.now came the scariest part. donning the gloves and applying the latex. it stinks! i put down a couple of trash bags and dove in... globbing and smearing until it was covered. i had to warn customers away from it, so Blucky wouldn't stick to them! one guy nearly bumped into it, just walking by. maybe i should have done this step in the back room, away from people. i hope he turns out ok... hair, stain and paint are the next steps, when he dries out. STAGE 6so i stained Blucky. i think i got a lil heavy handed with the stain... but he is my 1st ever, so it's all good! i bought MinWax mahogany gel stain and a large pack of cheap brushes (getting my Lowes connection price of course- dented can)i placed Blucky's feet into a large box. having stained my kitchen cabinets once, i expected a HUGE mess... but the gel is marvelous! NO DRIPS AT ALL!i did get a little splattered onto my left hand and forearm, but that is because i'm a slob, LOL.several customers wandered over to watch, and inquire about him... several seemed genuinely interested in our Halloween obsession! a couple of kids who were there were thrilled, and assured me he looked totally gross! only 1 customer questioned why we were working on Halloween in February. this is a far cry from last year when i was detailing the tombstones at the shop and had people looking at me as if i were crazy... maybe i'm rubbing off on them, or maybe they are used to my eccentrics by now, LOL!Josh and i left the shop at 6, and Danny stayed over a few minutes, (he's painting truck parts in the back room) he said when he walked back through the empty, half-lighted, locked shop he caught Blucky out of teh corner of his eye and it spooked him! a sure sign of a job well done! anyway, i suppose Stage 7 for Blucky will be eyes... or LED's. definitely an LED in the chest cavity. this will be up to Danny, as i don't do wiring (yet, lol) so the ball is in his court!my motto? the couple who haunts together, stays together!
Topic by susanfromhauntspace 11 years ago | last reply 11 years ago
Well i hate to bother anyone but can you please take some time to read this book i worked hard on ? i spent countless hours of my free time over the weekend developing the plot and creatures so can you please take some time out to read the whole thing tell me what it needs or what would be good i already am 16 pages into the sequel so tell me if this is good so i can post the sequel ! enjoy Times come by Alby Chapter 1- beginning It was the night I would never forget,the night.......i....the......the last night I would enjoy life. It was spring of 2017 the night air was heavy in my lungs and you could faintly smell the BBQ and charcoal smoke from cookouts that died down hours ago I could here people talking and having a good time but I think my drink I grabbed the wrong beer it was Sarah's it was spiked I never would have noticed who did it at least it wasn't her to drink it. I simply enjoyed the sky line of Chicago filled with sky scrapers and mirror like office buildings it all seemed like a Bokeh picture to me the drug is taking affect on my body I feel dizzy . I hopped on the train, it was empty as for the weather gave a good reason to walk but I needed to get home safely. In about 30 minutes I was home. I clumsily walked up the stairs and almost fell it took about ten minutes before I opened the door, I then plopped down on my bed and ran to the bathroom and regurgitated everything I ate that night. i starred at the ceiling. I saw every detail to the nearest centimeter and then blurry the specks the marks swirled in my vision and I felt weightless for a while. I starred at the clock and noticed it was about 4:00 am and cursed myself for going to that bar with Sarah I threw up all over my bed. I tried to grab the phone to call the paramedics but I fell and hit my head on my night stand. I passed out from the concussion i fell into a deep sleep a very deep sleep. Chapter 2 Change I wiped the crust out of my eyes and felt my head a sharp pain rippled thru my scalp it was a Gash about two inches in length. i walked into the bathroom I pulled the faucet but all that came out was a wisp of air. I snatched a baby wipe and cleaned off my face I cleaned my wound with alcohol the sting ive gotten used to I used to get hurt pretty bad in the army, I got shrapnel in my knee and they sent me home the first year. I noticed a dead silence on the street I thought they probably closed it off for some type of repair. I put on my white tee shirt and noticed its softness and how it fit snug on my semi-muscular figure I was in good shape for a twenty-four year old, my mom would always tell me most of the people in America are fat but I guess she loves to tell stereotypes for what they are. I put on my jeans and not forgetting the belt this time either. I snatched my keys off the kitchen counter and headed for the door. I walked outside and paused too look at the empty streets filled with litter and carnage . My mouth wide open in amazement I asked myself what happened and pondered the different reasons riot,panic,fire what could cause such a mess, I walked towards a police squad car and smelled something rancid I slowly proceeded, I instantly veered back in panic I could not believe what I saw a dead police officer lying face down with half a chunk blown clean off his head. There were pieces of it every where splattered on the windshield and door of the police car and some on the concrete. I instinctively inched towards him and thought to myself that something bad is happening and I need protection. I unhooked his holster off his waist and placed it on mine I pulled off his Kevlar vest and put it on weirdly enough it barely was messy or smelled bad. I checked the pockets of the vest and took out a pair of keys I knew it belonged to his squad car. I first popped open the trunk and saw it glistening in the sun a Ar-15 assault rifle. I picked it up and the memories of my army training it just instantly popped into my mind. I guess it applied the same here, I slung it around my back and walked into the silence. I took out the pistol put in the clip pulled the slide back and switched the safety off and cautiously held it. I believe the gun made me more nervous than whats in the shadows, I walked down the narrow street and saw it the skyline of the city filled with smoke and fire. I stood in anger and confusion my home town ravaged broken and charred blood stained the streets and walls, but why.....why....how could this... I mean what could....d..do such a thing. I walked away in the opposite direction and then cut into an alley way to piss and paused as I heard a roar I looked up and saw a quick glance of the belly of a apache attack craft it quickly zoom by and then another. I looked away and ran out of the alley and then down the street to see what direction they were heading. They sped towards the lake area and then I saw a tiny black object fall horizontally from the choppers belly and it slowly fell, then a explosion. I could feel the vibrations. the explosion ripped the lake area into nothing....nothing..but....but...smoke. My heart skipped a few beats thinking what if the next one falls in this area I quickly broke my daydream and bolted as fast as I could as far as I could until I saw a woman crawling on the concrete she was Moaning and holding her stomach. I came up behind her and asked for help. She turned on her back “ Sarah? Ohh my god sarah are you okay ?” and she held a gun in her hand a Glock 22 model the slide locked all the way back and no clip in the gun. I kicked it out of her and and sprung on her she begged for mercy “albert you have to stay away from me im turning” she saw that I was armed and quickly told me the gun was unloaded and that she was sorry she told me she would do anything just get away from her . I told her “Im not here to hurt anyone I just want to help” I starred at her beautiful figure her perfect face and thin hourglass body but ragged cloths and red eyes from crying. How and what did she go thru that could turn her into such a wreck. She got up and put her arm around my shoulder kissed me on the cheek and passed out. I dragged her to an fenced off alley where there was a mattress I put her down and sat next to her .she hugged me and began to cry she than jumped on top of me “Sarah what are you doing no we cant do this now no!” I told her I will help her but I dont think she understood a word I said. She looked at me in my eyes I could feel her touch my soul, her blue eyes glared in the sun. “i dont want to die alone please” I stood up nervously, I was concerned for her health when suddenly I heard a bang then felt a sharp pain in my leg. I collapsed in agony and saw the cause of my pain a bean bag round I looked up and saw a gas mask wearing figure he shot me with another bean bag round in the knee, from his shot gun he then walked over my numb body and. picked up both bean bag's and threw it aside two people in hazmat gear grabbed Sarah and took off her clothing I screamed “what are you doing to her!!!” they did not acknowledge me they looked at her body like they where searching for something. Her passed out figure limp as a rag doll they removed her pants then her underwear I screamed “No!! you son of a bitch don't do it ill kill you” they studied a bite mark on her upper thigh they made some type of hand signal and left. the soldiers then they came and started pouring gasoline on the mattress and her body. the one with the kriss super V took his cigarette out of his mouth and then flicked it at her it rolled of of her shapely belly and hit the mattress her body bursted into flames and she spasmed and kicked wildly. Then the man pointed it me and said in a British accent “ knock that fuckin Yankee an put em in da ACP double time, thoes hungry bastards are comin” Chapter 3 world gone mad I awoke on a bed in clean clothes and a hair cut. I stood up and walked into the hallway and noticed that this was a hospital. Suddenly a hand grabbed me. “aey where do you think your going ya damn runner rapist” I starred at him & his arrogant look and heavily customized ACR bushmaster. “get the fuck away from me im leaving what ever the hell this place is” he then sprung up and pushed the barrel of his ACR into my neck. “look if you want to get devoured by those runners be my guest buddy but dont go exposing this place to the infection” I looked at him like he was retarded “infection what infection and why the hell is the army bombing populated areas” he looked at me the same way. “ where were you 2 days ago ? There was a virus it was originally H1N1 but it evolved up to 10 times now its got Chicago by the balls and its spreading across the world as we speak turning everyone into animals devouring and ripping people to shreds and then the virus takes over the dead body and brings it back as a runner also know as a fresh undead body that has the ability to run or sometimes sprint god forbid but after 2-4 weeks without food the tissue breaks down from constant use without fuel and they start to get slow and shuffle around” my mind felt overwhelmed I wondered how my parents were doing in Dallas. “so what am I supped to do here but be a waste of space” he grinned. “well you obviously know how to use a weapon and our records say you have been in the military. you cant take care of yourself out there so we will make you part of out kill squad. “kill squad ?” “ohh shit you mean you have never killed or seen any infected yet ? that means your fresh you can be put to good use in our kill team” he told me his name was henry the specialist of his team kill team Charlie-mike. He directed me to the staff sergeant who looked at me and said “well well well we got some fresh meat hope you ready for 3 months of hard core trainin cuz this wont be easy now get yo ass in the garage and clean every APC tire the armory I think the kill teams ran over a little too much runners” 3 Months later........ the training was more rigorous than the basic military stuff a the armory where there was at least a 100 others conversing and grabbing into boxes of gear. Henry took me to the gunny of the armory where he helped me choose my gear. I picked up dragon skin Kevlar with implanted ceramic & alloy inserts. I took some gloves which I cut the fingers of. My boots where the basic digital camo color probably a left over from the war in Iraq which ended several years ago when our president simply drew the troops out. And European troops and some Russians finished off the big time terrorists soon after we heard no more from any our genocidal efforts finally payed off. I went to the weapon stand where I had to fill out a ID sheet to make sure they knew I had training with combat rifles. I chose the ACR which was in stock by the thousands as a gift from the weapon companies to the American army. I pulled all the safety clips and then grabbed a eotech scope out of a box and locked it onto the rail system of the weapon. I attached a mag pull the every one of my carbon strength reinforced clips. The gunny looked at me with a grin and we left for briefing. Chapter 4 things get messy we met up in the garage of the hospital every runner hunter of this kill force a total of 300 men and women in the huge elevated parking complex of the hospital, a general arrived in the elevator his chrome glasses shined in the evening light so did the many badges pinned on his suit which fit his old figure rather awkwardly. he had two formally dressed men with him they both had desert eagles on there side holsters but the general had a FN 2000 slung around his back. it was worn and scratched its polymer body was embedded with and insignia that I did not see so well as it was obscured by the scuffs and grime he looked at us and smiled his mouth opened and he flung his cigar off the ledge of the building he then begun and explained in a dominant voice. “there are 40 spec op Humvee's set up in formation ready to patrol the streets of Chicago you all will be in sector 6 the most dangerous sector of Chicago but no need to worry we have full fledged firepower of 4 APC's which will Carrie your kill team to your objectives take as much time as needed the runners arent going any where. you will clear the sears tower area a hot spot for runners. look all you men and woman, its time to revolt and fight back. its time to say we will not be scared, we will not be intimidated, we will win back our freedom!!” the whole complex light up with cheer. As the two men in formal wear took out PDA's and started directing people to there kill teams the first man shouted “ Chavez,Williams,buck, and,Samson go to APC #1” I quickly advanced thru the crowd to APC 1 I slowed my pace and saw its matte paint job of digital camo and its pop up dillan machine gun turret mounted on top. I pounded on its steel behind and its back door unlatched I stood waiting for the rest of my team I saw all three walking in a line towards the door I saw him ,the man with the kriss super V he smiled at me and said “no fuckin way you tha yankee we picked up in tha alley way you mad cus we killed your little runner girlfriend” I sprung towards him and grabbed his collar and punched him in the stomach then elbowed him in the mouth all the color drained out of his face. “ if you wouldn't of shot me with a fucking bean bag I would of blown your brains out back at the alley” he looked at me and with blood dripping down his mouth “i was just doing my job. welcome to foxtrot 3 by my names john samson you can just call me hunter” I let him go and he limped into the APC then another walked towards me he wore a Grey baklava and tight fitting clothing and a vest that barely covered his chest which awkwardly bulged out he walked towards me and took off the mask. She looked at m surprised face and said “what ? a woman cant be in the military” “well I..I...I just did not expect to have such a high rank personnel on our team” she looked at me and frowend “were both specialists grade one my names Kelly williams” “a heavily armored male in a hijab walked towards me playfully he came up to me and pulled off his hijab he was a African American . “hey specialist now look Im basically here to keep the moral you catch me ? I was in the navy im Ricky buckman Just call me squid now what do you want to go by kid?” I smiled “echo” “nice choice” Albert “echo” chavez I thought in my head I figured that sounds good. We all jumped in the APC while a kill team of rangers in a heavy Humvee with a mounted sentry gun rolled behind us as the whole convoy of kill force 6 prepared for battle. I thought about all my training aim for the head,short controlled bursts a shot anywhere else just stunned them. They move fast so they have to be neutralized if you get bitten or infected kill yourself with the poison capsule that was given or a team mate would do it. I grabbed a Kukri blade off the weapon rack that was provided in the APC I looked at its razor sharp edge its brushed steel surface reflected no light I sheathed it and strapped it to my leg. I caught the eye of Kelly who was fiddling around with the UAV control panel she looked at me and smiled. The APC's lights blinked red prompting us that we are in a hot zone. The APC vibrated as the co pilot took out a pack of runners with the Dillon remote controlled mini gun. We all loaded our weapons and packed up some ammo. Hunter and squid looked at each other and they bumped fists. I put a clip in my ACR and cocked it I turned on the eotech scope and strapped on my helmet and then slid on a black baklava. The APC driver prompted a alarm which was the signal that the door was opening, the big metal door slowly lowered its platform to the ground and we all got out Kelly was the last one out she grabbed that control panel and slid it into her bag she ran out and flipped the close button on the APC. We met up with the four other teams in our sector who already exited there Humvee's. A black Humvee that I never knew was in the convoy rode up and a military adviser jumped out and barked orders like some scared little dog and then jumped back in glad that he wasn't us. He positioned eight snipers on the roof who where each divided into teams of four they zip lined up the roofs and soon each team where picked up by two little bird helicopters the rest of us where on the ground either Humvee calvary hit teams or long range grenade support foxtrot was positioned on the magnificent mile at least it was magnificent. We cautiously walked down the street with another team of 6 watching our back and little birds with snipers covering us and telling us where the nearest pack is. It was empty until we got a report a pack of twenty runners where heading straight for us about 3 blocks away we had about a minute to prepare, snipers took out some and only six broke there steady aim and where 5 feet away, I drew my weapon and just before I could fire a Humvee rammed half the pack of runners over my team shot at there heads to finish them off . I stunted back and fell startled by a runner with broken legs dragging its smelly corpse towards me, my team did not even notice as they where pre occupied with finishing off the pack it grabbed my boot and pulled itself onto my chest I pushed it back and hunter tackled it and shot it once it grazed its ear he then rad up to it and curb stomped its head in over and over, like an egg it crunched under his boot he then walked towards me and picked me up and then our comm's screeched with a danger code: sector red REPEAT SECTOR RED!! this is not a drill!! squid looked at Kelly “OH shit radio the APC radio the APC!!” Kelly hastily radioed the APC and it arrived around the corner ASAP she got in and took the panel out of her backpack all the rangers got back in there Humvee's and formed up a line of vehicle's and the APC was in front we all jumped in and squid popped open 3 of the four combat hatches. We took stance and poked our body's out of the hatches while Kelly was typing away at the panel. “Kelly get us that predator drone NOW!!” “on it Echo..about.....NOW!! get ready for some boom boom boys” she said over the comm a predator drone deployed from a building somewhere and roared across the city's night sky. The little birds shot flares into out immediate area and the military advisor said nervously over the comm “formation green zone ASAP make space for one more hummer!!” his hummer screeched into our circle formation at the middle of the block intersection. We all could hear the uproar and the screaming rage of the Runners it was 9:00 PM and my stomach dropped as runners came at us from every angle swarming in between all the vehicles as we took out as much as we can the advisor yelled. “Break formation head for lane 3 of sector 5 Kelly yelled “but thats a dead end we have no where to go !!” “exactly now MOVE !!” we hastily rammed out way thru the crowd of runners it was easily about 200 to 300 runners we reached the street which was a dead end it was blocked by a collapsed building from all the beach bombing runs. We waited for 5 minutes until we saw it our doom three times as much runners appeared and headed for the convoy. The driver looked bewildered “Get ready im breaking position” he advanced the APC towards the crowd its massive tires gripping the rubble and concrete so agile and quick. He opened fire the Dillon mini gun until there was not one round left. the APC swiveled madly like a dog chasing its tail, all the blood and body matter stuck to the tire made it impossible to control. The whole interior rocked forward on impact with the flipped car. suddenly a screech and the APC flipped over on its side. the runners ignored the APC and went for the group of Humvee's ripping the rangers out that had not locked there Humvee door and devouring them. We herd the screams despite layer after layer of Kevlar and Armour of the APC. My radio started to squawk. “ Pindad Panser down repeat,flipped on its side calling in little bird for support !! bring in UH-60 shadow for medivac ASAP!” I groaned in pain the impact was hard,i could taste blood in my mouth my world was spinning. my team mates did not move they where all laying face down. I soon passed out Chapter 5 delta crimson “Delta crimson GO GO GO !!” I awoke in a sweat, I felt normal again I wiped my blood crusted face off. I leaned up and saw them. “Squid Kelly Hunter Your all alive !” hunter smiled “the crowds not givin up. Hurry mate we got to get outta this APC or crimson is just gonna have to save us” Crimson was an elite rescue squad of some of the best rescue force members in the military marines,rangers,green berets, you name em they can save you. Suddenly we heard the roar of helicopters. Then the door of the APC light up and blew of its hinges a soldier in a crimson baklava shined a light me and my team he latched two metal hooks onto our APC and then the helicopter lifted us into the air, this vehicle the best attack helicopter crafted by the engineer crew over at Hudson base they called it the Shadow because thats all it was, a quick killer in the night. A man made machine manufactured to kill and thats what it was best at. I broke for the chopper and jumped in then squid then Kelly it started to take off right before it left ground hunter grabbed the bay door and climbed in. “forgetting something ?” He threw me my ACR bushmaster which started to look like the generals FN 2000 it was scuffed and marked in every crack and crease. A crimson medivac specialist handed us some refreshments and snacks he said he picked it up at his last raid. He gave me some meds, adrenalin shots use them as a last resort of energy he said. I looked at squid who was holding his dog tag “ man echo you see how that APC flipped on us I almost crapped my pant's” I laughed at the joke even if its not funny my team needs the moral. I looked it the pilot he caught my stare. “where going to the main objective” I sighed and looked away hunter looked at me and made some type of hand signal. “hey Kelly you think we could of died back there” “easily hunter luckily the runners did not find our APC interesting” I looked over at Kelly who was looking at the cracked screen of the control panel. “hey Kelly what all did you use that panel for” “i saved the whole platoon with this thing while you where taking a nap, now its gone and base is a long fly away. The screen broke when the APC flipped. And the predator drone crashed without me controlling it” “damn, nothing good ever lasts long does it” “well echo thats not true your still alive aren't you ?” I we both smiled and when the happiness broke it was back to work. chapter 6 Raid The shadow landed on the roof of a building about 3 blocks away from objective R.R.T.R (runner ruled territory raid) our forces had to kill all runners and take back the sears tower. Kelly was stationed on the roof with hundreds of other snipers .with her barret M82 which ripped into 2 to 3 runners at a time with its large caliber amour piercing rounds. Military advisors sent Ground troops they marched the streets for the main attack on the R.R.T (runner ruled territory). Soldiers of all pact creed and faction marched side by side. the ISF (Iraqi Security Forces) the IRA (Irish Republican Army) even the CIA and DEA forces were marching along with whole police precincts including the bulk of the U.S military. This battle was inevitable and we are going to win.
Topic by albylovesscience 9 years ago | last reply 6 years ago