I going for little bit cause my computer i s not working the best
Posted by knexsuperbuilderfreak 10 years ago | last reply 10 years ago
Asked by wenpherd 9 years ago | last reply 9 years ago
Because I am very inexperienced at building knex :( and direly need more pieces, i thought I'd ask the general public by starting a forum. :::::::::::::::::::::: DDDDDDDDDDDDDDDDDDDD Please post where and how you purchase good knex for building. I'm sure this information will help everyone.XD ps: I should post the pic in the Louvre! :DDDD
Posted by salbabob 10 years ago | last reply 10 years ago
I'm going to buy usb arduino board, some leds , breadboard and some other stuff and I would like to ask a couple of questions.(I've never bought a thing on internet :S )I chose http://www.sparkfun.com/commerce/product_info.php?products_id=666The shipment payment when do I pay for it (does it sum up with the items, or do I pay in mail office)?(PS. I live in Lithuania) What does this mean : First Class Mail International Package $3.44 NOT TRACKED, NOT INSURED "NOT TRACKED, NOT INSURED"?and there's also International Economy (4-5 Days) $37.48which is really not attracting me because it would cost a lot (atleast it would for me ) and it would cost more then the item I'm buying.How long would it take to ship the items(2~3 weeks?)?Thanks for reading.Help would be really appreciated :)
Posted by chosenone3 9 years ago | last reply 9 years ago
I interested in purchasing your broken iPod Classics, iPhones, Videos, and Touches for a project. If they don't work, I want them. Working iPods steer clear, I'm interested in broken ones ONLY. Let me know what you have and I'll let you know if I can use it or not. I will pay with paypal
Posted by laxmaster92 8 years ago | last reply 3 years ago
I would like to buy a desktop PC which would be mostly used for internet, a bit of gaming, some photo and video editing, and watching DVDs What type of CPU, RAM, hard drive capacity and video card should I consider for good performance. I would like to be able to use it for awhile before having to upgrade again. I'm looking to spend between $600-1000 (I don't need a monitor or any peripherals). Thanks Thank you for your advice, I've already bought a computer! Please don't tell me how much better a Mac is, I am not interested!
Asked by ChrysN 7 years ago | last reply 6 years ago
I'm endeavoring on an art project which basically consists of a motor attached to a mobile, though I'm quite illiterate when it comes to electronics. The motor that has a fair amount of torque, and I need to have precise control over the speed. Ideally, it should be quiet as well. I was thinking this might be a good time to venture into the foreign territory of Arduino and servos, but again I know nothing. Any advice or resources you can offer would be greatly appreciated. Thanks! Lance
Posted by LanceMakes 6 years ago | last reply 6 years ago
Hi there, I'm creating a simple circuit project for my students, though I don't know the first thing about electronics, so I foolishly bought tons of LEDS and 9V clips without the resistors - Doh! But now that I know I needs resistors, I'm not sure which type of resistors I need. A list like this is quite daunting to choose from. The LEDs I'm using need 1w resistors (I think...). Please feel free to ask my any questions or hand out other advice. Thanks! Lance
Posted by LanceMakes 6 years ago | last reply 6 years ago
I've been looking at instructables and I notice all these awesome LED instructables... But my question is.. where do you guys get these awesome little lights? I tried looking for some on google but they don't have the correct shape and seem a bit different.. Maybe I'm not looking hard enough or not putting the right keywords in google but I thought it'd be nice if I had got some feedback of where everyone here gets their LED lights. Thanks :]
Posted by Elycian 10 years ago | last reply 10 years ago
I need a picture along with the answer.
Asked by Bert99 9 years ago | last reply 9 years ago
Asked by r49417 6 years ago | last reply 6 years ago
I am selling my llama 9mm and buying another 9mm hangun. i need to find one for under 300 dollars. it needs to be modern...(no revolvers) i know there are modern revolvers but none of those.
Asked by average joe 1999 7 years ago | last reply 7 years ago
Hey Instructables, Due to an overwhelming "can I buy this?" response, I've put the Beer Bottle Lock on Quirky. Please spare 5 seconds and vote for it. If it gets a lot of votes, you'll be able to buy it through the site and I'll get a cut! And I'll buy you a beer... with a lock on it... Here's the Quirky link: https://www.quirky.com/invent/1529564/action/vote/query/view=trending&categories;=all Here's the instructable: https://www.instructables.com/id/Beer-Bottle-Lock/ Thanks! JON-A-TRON
Posted by JON-A-TRON 4 years ago | last reply 4 years ago
So I am going to buy a new computer and need some help from some of you computer wizards out there. First off my price range is up to $2500 AUD and I would prefer as cheap as possible. The peripherals such as the monitor et cetera are allready taken care of what I need help with is the tower. So what brands/companies/designs should I look out for? Any Ideas for a computer with at least 2Gb of RAM and decent motherboard cards?
Asked by Tombini 9 years ago | last reply 9 years ago
Is there anywhere we can buy Instructables stickers? I know the old Yahoo store had them available, but that's gone now and there's only links to the spreadshirt store... which only does shirts.To quote Kiteman: You have stickers. We want stickers. GIVE STICKERS!https://www.instructables.com/community/Instructables-stickers/https://www.instructables.com/community/Instructables-Now-Has-a-Store/TIA. =)
Posted by ll.13 9 years ago | last reply 4 years ago
I'm selling an orion starblast 4.5" telescope: www.google.ca/imgres?imgurl=http://eridanusoptics.com/store/images//telescopes/eqmounted/OR9798.jpg&imgrefurl;=http://eridanusoptics.com/store/index.php%3Fmain_page%3Dproduct_info%26products_id%3D333&usg;=__fD6BTgmBfp6XqGZOFCZIjfwgw0o=&h;=500&w;=500&sz;=40&hl;=en&start;=0&zoom;=1&tbnid;=kScIj7bBieqngM:&tbnh;=149&tbnw;=149&prev;=/images%3Fq%3Dorion%2Bstarblast%2B4.5%26um%3D1%26hl%3Den%26client%3Dfirefox-a%26sa%3DN%26rls%3Dorg.mozilla:en-US:official%26biw%3D1280%26bih%3D768%26tbs%3Disch:1&um;=1&itbs;=1&iact;=hc&vpx;=347&vpy;=69&dur;=432&hovh;=225&hovw;=225&tx;=135&ty;=88&ei;=K5Z1TJiLOoOC8gb54r3yBQ&oei;=K5Z1TJiLOoOC8gb54r3yBQ&esq;=1&page;=1&ndsp;=25&ved;=1t:429,r:1,s:0 It also comes with a 25mm eyepiece and a 10mm eyepiece and also a x2 barlow lense. The price I am going for is $350, tell me if you would buy it or not.
Asked by solarblade90 8 years ago | last reply 8 years ago
Tonnes of instructables are based on microcontrollers, and i can't seem to find any. I can't get anything off of the internet, so that does no count. by the way, i live in india. And I will appreciate any help, just reply even if you think it would not be very helpful, it might just be.
Posted by DrCoolSanta 10 years ago | last reply 3 years ago
I have been trying to find a reasonably priced milling machine but also trying to find one that doesn't charge two times the price of the machine in shipping costs. I have been looking on Craigslist for the past six months and haven't seen anything. I am in Seattle, WA. Does anyone have any ideas of where I should look?
Posted by tranoxx 5 years ago | last reply 5 years ago
Asked by shire lad 7 years ago | last reply 7 years ago
Asked by arun.fifa 8 years ago | last reply 8 years ago
I am looking to buy the INNER hardware for a small/cheap recording device. I just need the hardware to record 30secs of voice audio. I do not need an outter casing for the hardware as I am making my own case for the hardware. Nothing fancy just cheap & basic. HELP!!!!!!!!! Thanks! Tracey
Asked by fire1973 9 years ago | last reply 9 years ago
hello instructables I am looking for a ardunio i live in cape town in South Africa and i am not ok with buying 1 over the internet. I would be a lot happier buying 1 from a store. I've been looking for 1 for a few months now please help
Asked by lj123456 8 years ago | last reply 8 years ago
Hello everyone! I have been searching the web for a good source of aluminium pipe (between 1" and 2" thick) with threaded endings and matching fittings. Can anyone suggest a good source? Searching the instructables forums I read about www.simplifiedbuilding.com, but they don't seem to have threaded fittings (only of a slip-on, use-a-set-screw kind). Any suggestion greatly appreciated! Happy '09! James
Posted by james.kirin 9 years ago | last reply 9 years ago
Hi all, Im sorry if this is in the wrong topic or specific post for these types of things. I am going to buy a digital photo frame for my father as father's day is coming. there are several online shop I got from google : www.onvon.com www.chinavasion.com www.chinatronic.com I was wondering have anybody brought anything from these websites Was wondering what are the feedbacks on this website. Many thanks in advance.
Posted by Jackchen 10 years ago
My Pentax Optio M80 has recently stopped working. So I am looking into buying a new camera.Does any one have any recommendations for a Camera That would mainly be used for:Taking some video for media techand taking pictures I am going to use it mainly for making movies for school but it would also be nice if the camera could take decent pictures.i have a price range from $100 to about $250 ,and i might be able to go above that but not by much.so any cameras you would recommend or to stay away from.
Posted by chrischavez 10 years ago | last reply 10 years ago
Http://arduinoteacher.appspot.com/matrix_8.html Hello! And i am interested in starting arduino! But i am not familiar with the hardware spec of arduino boards. I have some electronics and programming bg as an physics student. I read the above tutorial, the led matrix looks like a easy/cool starter project. However, i have a question, For 4 by 4 matrix, it need 4 outputs and 4 grounds. With 14 i/o pins on an arduino uno (0to13), is 7 by 7 the maximum for upscaling this design without multiplexing? Or if i can get a "shield" that add more pins to the uno? Should i just get a arduino mega with 54 I/O pins? Since it is not that expensive, Is the tutorial compatible with a mega? Actually my target build is two 15 by 15 matrix displaying identical image. Can i rig up two identical led matrix, connect both in parallel to the same board? Thank you in advance! for your replies!!
Posted by mchau2 2 years ago | last reply 1 year ago
I'm looking for an inexpensive telescope mirror to attempt some DIY Schlieren photography. I don't need a flawless one that you would put in a telescope and use in an observatory, I'm looking for the one that fell off the back of an astronomer's truck on the way up the mountain and got a scratch down one side and a nick in the silvering to make it worthless for astronomical observing. Any handy "old junk telescope parts" websites out there?Or better yet, does anyone reading this have a decrepit old mirror sitting in their garage waiting for me to buy it from them?
Asked by CameronSS 9 years ago | last reply 9 years ago
The only one's listed on eBay are high end (fairly to extravagantly high priced) transformers. I just need a little 4 legged 500 ohm to 8 ohm audio transformer. All my catalogs seem to offer little help. No need for the C/T like the one pictured....
Posted by Goodhart 9 years ago | last reply 6 years ago
Looking for an inexpensive laser cutting/engraving system. I will be taking it apart and customizing it to fit onto another machine. Currently, we have a rotating blade to cut sheets of material, but this set-up causes many issues. A contact free solution would be best. So I want to mount the laser carriage above the cutting area; the rest of the laser parts will be contained in a metal cabinet under the machine. The laser would need to be able to travel 12-16 inches in 1-2 seconds and cut through 1-5 mil paper/poly material. I have a fair amount of experience with lasers, I have know how to sight them in and understand the technology. We currently have 45, 100 and 400 watt galvo head lasers, as well as a 90 watt XY laser set-up. So, what website would you direct me to, to purchase an inexpensive laser system?
Posted by benjaminleebates 3 years ago | last reply 3 years ago
I was looking through the discounts that pro instructables members get (which I am). I saw a 10% off your purchase from adafruit. It said that you can only use it once but I have never used it before. I was trying to buy an arduino uno, full sized breadboard, and breadboard wires. When I entered the code that I got (which I wont say on here but private message me if you need to know it) in the "enter gift certificates or discount codes" box in your cart it says invalid coupon code. Away from that, On the iOS app running iOS 6.1.6, there are many glitches in the app. One of them is that in the contest tab, it only shows some of the current contests, none of the finished and rarely it will show one that is being judged or open for voting only. Then it doesn't show all of the contests. For example, today, 6/30/14 at 4:30 pm Pacific time, It shows 15 out of 23 contests. It shows the contests: squeeze ore out of summer, Epilog 6, summer #mikehacks, paint it, great outdoors, lego, knex, metal, home tech, hair and makeup, concrete, glue, bbq, swimwear, and battery contest. The ones it doesn't show on the app that appear on the website are green design, launch it, wheels, outdoor workshop, bees, tarun featured author, r/c, and pallet contests. Some website problems are also there, Often times you will have to click search twice because the first time it will just go to the featured page. You also have to click twice to place a comment. I'm not sure if this is a bug but I posted a Q and A topic about how I haven't got a medal for different things like being featured and getting views and also comments. I've got one featured and about 13.5k views. I should have two bronze medals. In the Q and A topic someone answered that I might not be able to get them for a certain amount of time: e.g. a year, I've been a member for about six months, so I thought that might be true.Then I saw that Bhawya already has 6 achievements including 3 medals, and she has been a member for less time than me. Also, a suggestion, it would be nice to have forums, groups, and Q&A; on the iOS app. And a collections section.
Posted by pucksurfer 4 years ago | last reply 4 years ago
I have C-language knowledge, and am looking to buy an Arduino, and don't want to have to buy another as I progress. Which is the best deal?
Asked by crocboy 9 years ago | last reply 9 years ago