combat arms user names

Post ur combat arms usernames below ps mine is imawinner

Posted by finmonster 8 years ago  |  last reply 7 years ago


Ideas for motor drive mechanism on a so-far un-designed combat robot?

I am going to be soon thinking about designing a combat robot for fun. Probably won't be any real competing (unless it's among friends). I am however at a loss for what kind of motors/ where to get them to use for the driving mechanism so the bot can move. Any ides anybody? *Finding old cordless drills and removing the motors did come to mind

Asked by An_Amateur622 6 years ago  |  last reply 6 years ago


Drive systems using cogs for a combat robot? Answered

I am making a combat robot and would like to purchase a drive system which can power two 6cm diameter wheels with a resonable amount of toque. I have a 9.6v motor of which i would like to power it with. Thanks Oscar

Asked by oscarthompson 9 years ago  |  last reply 9 years ago


Giant knex crossbow to combat wicky's

I created a big crossbow to combat Wicky's decimator

Posted by knexmastergunartist 9 years ago  |  last reply 9 years ago


Is there any Combat robot fights in the Philippines? Answered

Asked by tobyscool 8 years ago  |  last reply 2 years ago


Knex Combat Shotgun

Hello! Here is my Knex combat shotgun. Its semi auto and has pretty good range. Should i post it?

Posted by Millawi Legend 9 years ago  |  last reply 9 years ago


How to Build combat suit? What materials are needed for bulletproofing? Cheapest materials that can be used safely? Answered

I have some designs I'm mainly looking for recommendations and references for the materials needed. Also need some advice on kinetic energy replacement for high drops and jumps. Frame material needs to be light weight and strong. Outer armor will be interchangeable. Weapons are still in development more posted later. Also all metals must be nonferrous.

Asked by DaVinciStein 6 years ago  |  last reply 4 months ago


my computer turns off when i play portal?

My computer turns off when i play portal? i can play Halo combat evolved perfectly with almost no lag online but when i play portal for a while

Asked by ahmad2117 7 years ago  |  last reply 7 years ago


Halo Trial MODS

This topic is sharing halo trial mods you have found. I have almost every mod and if you want one i will get it to you asap. please leave your email so i can get it you.

Posted by Bert99 8 years ago


can anyone guide me in designing a combat robot tat can sense obstacles ?

Asked by shipu 8 years ago  |  last reply 7 years ago


What stimuli does a combat robot needs to respond to?

Asking so that I can make the right sensors for it, it's a wheeled robot, not humanoid, and the robot it'll be fighting with will also be a wheeled one.

Asked by Wisaam 5 years ago  |  last reply 5 years ago


Battle field 2:modern combat for ps2

Does anyone have a battlefield 2:modern combat for ps2 online account?If you do than leave a comment for everyone else to see. My account name is Alpha95 spellt exacaly like that. knex htr htr.OUTTTT

Posted by knex hater hater 11 years ago  |  last reply 10 years ago


How can I recive hand-to-hand and close-quarters combat training?

I want to learn usuage with combat knives, and fists. Some blocking teq's, more offensive punches/stabs/slice.

Asked by PKTraceur 9 years ago  |  last reply 8 years ago



Need help in making a Motor Controller? Answered

I am building a combat robot and need a   24v , 100A Motor Controller to power the motors. I will be using a 2.4ghz Turnigy 9x Transmitter and Receiver. I have seen the Victor 885  (link) motor controller that perfectly fits my need, but is too expensive for me. Could someone please help me in building a motor controller similar to the Victor 885? 

Asked by Jayvis Vineet Gonsalves 6 years ago  |  last reply 6 years ago


RMACR (Red's Mini Adaptive Combat Rifle) V.2

Apart from my Calico M-950 and my Magpul Masada ACR, the RMACR is my favorite build of all time. I sorta consider it my TR8 of magazine guns. As this is the case, I bring you the RMACR V.2. While it is not a huge change from the first version, it is still a great gun. Moreover, it may be generic to some people, but if a generic gun does its job, and does it well, what does it matter if it is generic. With ranges exceeding 50 ft., a 16 rd. magazine, a new (sturdy) stock, nice sights, this gun would excel in an indoor K'NEX war. Features: Looks great (IMO) Sturdy (except the pistol grip) New stock Really nice pin-pull-length 16 rd. magazine Relatively good rate-of-fire Really accurate Fun to shoot This gun can fire the ammo you see in pic #14 (which is THE best ammo, IMO), or it can fire white rods. It is very customizable, as you could change almost anything (except the mech) and it would still work great. Sadly, it does use broken pieces, and it's magazine is not "preloadable," but the gun is nice overall. I am posting this as a forum topic because I want to gauge interest in me posting a full set of instructions. -The Red Book of Westmarch

Posted by The Red Book of Westmarch 5 years ago  |  last reply 5 years ago


How to make an automatic shooting mechanism for a robot? Answered

It's a small robot and it needs to shoot marbles, its a combat robot, so it needs to shoot with high velocity and the shooting mechanism needs to be automatic. It should keep shooting marbles until the motor, or something else, stops any ideas on how to make this mechanism.Just like the one in the link below: http://www.youtube.com/watch?v=P8sBvgOQHX4

Asked by Wisaam 5 years ago  |  last reply 5 years ago


Combat Arms experiances

Hi guys. as some of you may know, there is this amazing online FPS called Combat Arms, and since i know that a lot of people like this game, i created this forum in which we can all share our experiances and other cool things that happened to them while playing the game.If you are interested in Knex, you may also submit cool ideas for guns or other things from Combat Arms that you would like others to build.I would like this forum to be as friendly as possible, so please no calling eachother nerds, n00bs, addict, or anything else ok?if you would like, leave your player user name so that others can add you to their Combat Arms accouts and make buddies with each other. Also, to make this more interesting, you can also put screen shots here for others to view.I have provided a link to the combat arms website for those of you who would like to know a little more about the game and those who would like to download it.http://combatarms.nexon.net/Intro.aspxRemeber! I am not a hacker! Many people have reported me for hacking just because I play good! My kdr is 1.42! If you would like to challenge me on combat arms, please notify me on my forum. If you win, then I will subscribe you, 5 up all your 'ibles, and choose 2 of them as my favorites. If you have nx, please share some with me. You don't have too if you don't want too, but it would be much appreciated! :)Below is a list of the usernames on this site, to their names on Combat Arms. also, those of you who play this game, please leave behind your kdr so that others may know more about your online player, as well as your clan if you are in one.1. knexsniper1 -- combatguru -- 1.42 -- NeVabaKdown4life2. Jared1234 -- SUPERFREAK12 3. Logicboy -- logicboy4. lioneatr -- knexmaster5. bighead5454 -- bighead5454 News: i am now offering training sessions for anyone who would like to further develope their skillz at this game! :P i you would like a training session from me, then i will be more than willing to teach you, but it has to be at a time that works for me! also, as payment for the lessons, i will accept five ups on my ibls or subscriptions! :P Have fun! :)

Posted by knexsniper1 9 years ago  |  last reply 7 years ago


Combat arms; Failed to join battle, connection timed out?

OK, so i downloaded Combat Arms to see what it was like, i downloaded it, installed it, made a user. then when i started it, it worked fine, i logged in, joined a server and a room, then it said the game was starting so i waited, it counted down 5, 4, 3, 2, 1 then the game froze for around 5 seconds, I thought the game was starting so I waited. Then a message popped up: Failed to join battle. Connection timed out? I have tried re-installing the game twice, allowed CA through my firewall and anti virus (AVG 2011) and yet it still wouldn't let me join a game. I then disabled my firewall and AVG to see if it still happened, STILL DIDN'T WORK! by this point I was getting annoyed :S I exited CA and re-enabled both my firewall and AV software. any help would be appreciated, thanks in advance. P.S. We recently got a new router so it's not our internet, i am also running windows 7 64bit, running CA in admin and compatibility for xp sp2 thanks in advance :D

Asked by freerunnin1 8 years ago  |  last reply 8 years ago


Directions to Make an Airsoft Halo M6G Magnum?

I was playing Halo, and was wondering if i could modify the appearance of an airsoft pistol to match that of the M6G Halo 3 pistol.  Are there any instructions, that are easy for a newbie on this stuff to follow, on how to modify a gas blow-back airsoft pistol's appearance?  Thanks, bye. NOTE: It needs to still work

Asked by bighead5454 7 years ago


i am not getting the rack and pinion mechanism so how can we build it. so that there must be a prper allignment in them?

We can use this mechanim in robo combat as a weapon

Asked by abbuabrar 8 years ago  |  last reply 8 years ago


Building a home-training program?

Sup all! I'm really interested in becoming a modern ninja, so I googled it a bit. In order to be an urban ninja, I will have to learn parkour and the highlighted of the traditional 18 ninja skills, others will be useless.(Horsemanship? It's Urban Ninjutu, in a city...) Check wikipedia here for more info. unarmed combat sword techniques stick and staff techniques throwing weapons techniques pyrotechnics and explosives disguise and impersonation stealth and entering methods water training tactics espionage escaping and concealment meteorology geography I need to find a good book/DVD series that will teach me traditional Ninjutsu, thus will teach me all of the listed skills. I want to focus mainly on unarmed combat, followed by stick, staff and sword techniques and weapon throwing. The rest is stealth, to sneak into places without being detected. That should make me a basic ninja. Finally, after I'll know these, I will study the less important skills - the italic skills.  What I ask for help is, to give me a good DVD or a book that will teach me either parkour or Taijutsu(unarmed combat). These are the things I want the most, explained before. I prefer the course to be free, like an online study course.

Asked by netbus 8 years ago  |  last reply 8 years ago


dsman195276's sidearm

Its a good 8 shot pistol. it has ok power and a range of around 20 feet( sidearms are for close combat) heres a picture, it is a old picture but not to many mods have been made to the gun.

Posted by dsman195276 10 years ago  |  last reply 10 years ago


were i can have a remote control device for cheap? Answered

I want a remote control device for a small combat robot.  If you have some information for me send me by the comment.

Asked by copper tube 7 years ago  |  last reply 6 years ago


RoboGames this weekend!

Hi everybody! This weekend in San Francisco, robots and their makers will be congregating at Fort Mason for the fantastic event known as RoboGames. RoboGames is sort of like the olympics for roboticists, featuring events such as Autonomous Fire Fighting, Kung Fu, Bartending, and a crowd favorite: Combat Robots. This will be an epic event, I'll be out there for sure! See you there!Here's a video of the Combat Robots from Maker Faire this year: Also, keep in mind that Instructables is holding its Instructables and RoboGames Robot Contest where you can win a chance to go to RoboGames 2009, among other prizes like a RoboPhilo android kit!

Posted by bradpowers 10 years ago  |  last reply 10 years ago


StarWars Lightsaber event in San Francisco!

Hello fellows DIYers! :D Instructables is with no doubt one of my passions. Another one is lightsaber combat! This sport is very popular in Italy, thanks to Ludosport, one of the first sport association devoted to the study and practice of the lightsaber combat. I can personally confirm that this is a FANTASTIC sport activity, and now it will land @ SAN FRANCISCO! Jan 30-31, 2016 @Studiomix 1000 Van Ness Avenue, San Francisco, CA 94109 Come and try a new amazing sport activity, not just for Star Wars fans! Facebook event: https://www.facebook.com/events/1251151791565704/ Book your place at: http://www.ludosport.net/en/ Stay great!

Posted by Darthorso 2 years ago  |  last reply 2 years ago


Your Airsoft Arsenal

What Airsoft Guns do you have? I have a S.P.A.S. 12 Combat Shotgun, DPMS M4 RIS and a Colt Mk IV. I will update this as I get more guns. What guns do you have? These are my Gun Stats: *S.P.A.S. 12 Combat Shotgun* Power: Spring FPS: 250 Material: Plastic Extras: Folding Stock *DPMS M4 RIS Solid Stock* Power: 7.2v 1500mah Large Battery FPS: 300 Material: Plastic Extras: RIS ForeGrip, laser site *Colt Mk IV* Power: Spring FPS: 200 Material: Plastic Extras: Rails, Flashlight Heres are my guns:

Posted by Sgt.JJB 10 years ago  |  last reply 7 years ago


non-boffer related stuff

Okay, any ideas on what we should put on here?? Just boffers may be kinda lame. What I'm thinking is maybe combat, shields, sizing, and other LARP weapons. Any other ideas for other cool non-boffer related stuff?

Posted by geek27 10 years ago  |  last reply 9 years ago


Robot Marketplace Forum

A while ago Robot Marketplace created a forum that is focused on robotics, and more specifically combat robotics.  If you are interested in this sort of thing check it out.  It has some great potenial if enough people find out about it/start using it.  Here is the link: http://www.robotmarketplace.com/forum/index.php

Posted by JaredsProjects 7 years ago


How to regulate amprage for a combat robot

Hi everyone I am currently in the process of designing a combat robot with a max weight limit of 250lbs. the current drivetrain motors that I am using need 200 amps minimum to move the robot if fully loaded to 250lbs. The max stall amperage the motor will draw (when the stall torque is reached) is 856 amps I can not currently find an electronic speed controller that can safely handle that many amps or is in my price range. So my thought was to buy a 300-400 amp ESC and then set up an amperage regulator so that if the motor stalls and asks the ESC for more then 300-400 amps (whichever I decide to buy) when it asks the battery for that many amps the regulator will either block the current or only allow a safe amount of amps to the speed controller. I'm very new to detailed electrical side of this stuff so I don't know what exactly I'm looking for or where to find it. I would use a fuse but if the fuse blows in the middle of a match then I cant move which will cause me to lose by KO so what ever I do it must limit how many amps the speed controller can draw from the battery and then after it no longer asks for that many amps it allows it to function as normal. Thanks Guys!!  

Posted by CalebP5 3 years ago  |  last reply 3 years ago


What is the best knex m4 with removable mag??

Im looking to build an m4 soon, i already built combat knexs m4 and i didnt like it cuz it jammed on me

Asked by dillon27 8 years ago  |  last reply 7 years ago


do you play on runscape?

Hi people! this is just a random question, do you play on runescape? let me know whatever, but if you do, say your: name good levels combat level are you a member? how long have you played? do you have alot of money? what are your best items?

Posted by Flie-Ing GOOse 10 years ago  |  last reply 6 years ago


DIY Costume Mute Rainbow 6 siege

My son wants to construct a costume for Halloween: Mute from Rainbow 6 Seige. Some of the costume items are easy like Cargo pants, ski goggles, combat boots, etc. Do any of you have suggestions for the gas mask, tactical vest and details. Thanks for any suggestions :-)

Posted by Kathmandu365 1 year ago  |  last reply 6 months ago


What is your favorite anime character?

In a combat RPG game; What do you want to play as, who do you want to play as? I am making a board card game and i am asking you, what do you want to be? Examples: Goku, a turtle, volibear, a dire wolf, a swordsman etc... Game must be funny. So choose entertaining characters. I prefer tanky, melee characters bcause they are brute.

Posted by yuno44907 4 years ago  |  last reply 4 years ago


Knex underbarrel chainsaw

So i was bored one day and i made a knex underbarrel chainsaw attachment, it works tho, but the chain doesnt have little hooks so its safe to use in and out of knex combat it was really really bulky and rather heavy, it uses a modified knex motor and a micro chain you should be able to build it from the pictures oh by the way the gear closest to the handle is a bit to the side so the chain is a bit crooked

Posted by Kona-chan 3 years ago  |  last reply 1 year ago


is a steel kitchen pot bulletproof?

I am working on a completely home made armor set for sword combat.  Actually, it will be mixed with a few modern firearms such as .44 Magnum revolvers, 9mm handguns and .45 pistols.  It is better that you DON'T know what I am doing.  Trust me.  So the question, Is a steel kitchen pot bulletproof?

Asked by bendog38 6 years ago  |  last reply 2 years ago


ComBots: Special Instructables Discount!

Want to watch some robot mayhem? Here's a discount offer from our friends at ComBots: ComBots invites all Instructables readers to discounted tickets to "ComBots Cup V", the fifth annual heavyweight robot combat championship. This event highlights the best combat robot teams in America and their 220 pound flame-throwing, blade-spinning, titanium shearing robots of destruction! This year's event is Saturday/Sunday, October 23-24th from 2-7pm at the San Mateo Event Center. Whether you're a sports fan or techno geek, ComBots puts on the best robot events in the world! If you missed seeing fighting robots at Maker Faire this year, or are longing for RoboGames, here's your chance to see them again. Full details at http://combots.net ComBots is pleased to offer Instructables readers a 20% discount on ticket prices (adults normally $20, kids $15). Coupon is only valid for advanced purchases until Oct 20th. Buy tickets at http://combots.net/buy-cc.php and use the coupon code below for your discount when you check-out! code: Instructables

Posted by canida 8 years ago  |  last reply 8 years ago


I need a good airsoft primary, preferably automatic.

I have a few airsoft guns, a Swiss Arms sniper rifle that fires at 435 FPS, a crappy Crosman Pulse R70 that fires at around 115 FPS, and has a fried battery, and a UK Arms M4 carbine M- series that fires at 350 FPS, and I'm looking for another AEG with a good range, has good size for close quarters combat, fires at at least 350 FPS, and is in the price range of 100 to 150 dollars 

Asked by Nerfgenius 8 years ago  |  last reply 8 years ago


Instructable SPAM combat

I looked around a bit in the forums and didn't see anything on this topic, but I may not have looked far enough... I keep tabs on Instructables.com by watching my RSS feed, and I'm frequently annoyed by seeing blatant SPAM coming up in the feed.  Usually SPAM instructables have a photo/video with hyperlinks to an external site, and they're the very first published instructable under an account that was created only hours (or minutes) earlier. Is there a way that new accounts would be put on probation, requiring that their first instructable pass the sniff-test before being published in the RSS feed or elsewhere?  Perhaps long-established or trusted members with good karma / reputation (yes, borrowing concepts from other sites here) would have the privilege of giving a thumbs-up to non-spam instructables? Now, I'm not suggesting that this be a complex moderation system or that the instructable even be halfway decent -- just that it's not blatant spam.  If a first-time publisher posts spam, they get a thumbs-down with a boilerplate explanation of why their post isn't in the RSS feed.  They continue to be on probation until they post their first non-spam Instructable. Now, of course I realize that logged-in members to Instructables have the ability to hit the "SPAM" flag on an instructable, but in my opinion the damage has already been done.  At the very least, these users can be directed to the Marketplace forums.   I look forward to your constructive criticism. :)

Posted by Kozz 7 years ago  |  last reply 6 years ago


Elementeo Chemistry Card Game

14-year-old Anshul Samar has created his own science-based fantasy card combat game Elementeo. Check out the interview with him below.Elementeo is a strategic battle game where you use your elements across the battlefield in reducing opponent's electrons to zero. You do that by harnessing the strength and moving properties of the elements and compounds, and by using their reactionary powers. For example, Oxygen can rust any neighboring metal or Copper Conductor can shock any metals and send them back to the deck. via Wired's Geekdad

Posted by ewilhelm 10 years ago  |  last reply 10 years ago


Revolutionary Knex Gun Competition 2 Results

The winner is the C.A.A.R. (Combat Adaptice Assault Rifle) made by 182515. His stats for the gun; Turret: 110 feet with finned red rod, 80 feet with oodammo. Oodamo mag: 70 feet Grey Connector mag: 50 feet # of removable/ interchangeable parts : 5 and 1/2 (I'll explain that in the slide show) ,a removable mag and 2 sights. I will not be posting this gun. Although i may post a improved version Thanks to everyone who participated. The next contest can be found here.

Posted by Oblivitus 8 years ago  |  last reply 8 years ago


Anti-Graffiti Coatings? Answered

Would any of the resident geniuses here at Instructables have any ideas for keeping graffiti off of my cedar fence? I live in a fairly rough neighborhood in a major urban center, and we exclusively have the bad type of graffiti-- crappy tags from juvenile delinquents delineating their turf. Any ideas on how to combat this problem with a DIY, cost-effective solution? I'm thinking it might just be something that most spraypaint won't stick to, or a surface that will destroy paint pens. Heat-sensing, motion-sensing automatic machine guns are not an option due to the rampant stray population ;) http://www.youtube.com/watch?v=TqIHlnfGKV0

Asked by Nate Cougill 5 years ago  |  last reply 1 year ago


DSMAN1'S SNIPER/SHOTGUN KNEX GUN

It is the best gun i have ever made! look at the vid to see more. made for max range and accuricy.(i had the idea for it long before the sr-v1 was made.) still in developement. i thought that it was ready to be posted in a forum. there is just a shadow in the vid because the gun may go under lots of moding and may never look like what is in the vid when i post it. this gun can also be changed to a shotgun in about 15 sec. the shot gun is a little less powerfull then the sniper verson but is for short range combat the the sniper can not do.

Posted by dsman195276 10 years ago  |  last reply 10 years ago


If you could...

If you could... Spend an hour anywhere in the universe, at any point in time, where would it be? Meet 5 different people, from any point in time, who would they be? Have any one "superpower," what would it be? For me: Place: Mars, about 70 years ago. People: 1) Ernest Chappell, actor on Quiet, Please!, a 50's radio show. 2) Wyllis Cooper, writer for Quiet, Please! 3) Eoin Colfer, author of the Artemis Fowl series. 4) Ernest Emerson, founder of Emerson Knives and the Emerson Combat System. 5) Mikkel Maltha, the keyboardist/ bassist/ backing vocalist for the Danish band CRYOSHELL. Superpower: The ability to alter my molecular density, rather like Seth's in "Race to Witch Mountain" What would you choose?

Posted by black hole 6 years ago  |  last reply 6 years ago


Selling Runescape account for PayPal or RSPG

Just making a quick topic linking you to where Im selling an account. If youre interested in buying please inbox me HERE on INSTRUCTABLES! Link: http://www.powerbot.org/community/topic/686185-%E2%96%88%E2%96%88%E2%96%88-good-main-%E2%96%88%E2%96%88%E2%96%88-combat-level-98-%E2%96%88%E2%96%88%E2%96%88-92-strength88-attack-%E2%96%88%E2%96%88%E2%96%88-25mil-bank-%E2%96%88%E2%96%88%E2%96%88-autowin-5m-%E2%96%88/

Posted by Hiyadudez 6 years ago  |  last reply 6 years ago


What is your war kit??

Okay everybody I have another question for you. What is you war kit?? In other words what are the top 3 knex and real weapons you would take into combat??Top 3 knex weapons:main weapon ---- Trifle 18secondary weapon ---- modded rectanglepistol ---- spiffTop 3 real weapons:main weapon ---- FN Herstal P90secondary weapon ---- Ruger MP9pistol ---- I don't know a whole lot about pistols but i think a desert eagle would be good.Alright now jump in like before and tell us you war kit.By the way sorry about the bad picture I took it on my DSi.

Posted by Killer~SafeCracker 9 years ago  |  last reply 2 years ago


How can I create Magical special effects? Answered

I have been cast as Merlin in a medieval fair living chess board act. We have a few reliable magic tricks we've used in the past, but I'm trying to find/think up new ideas. This is a live show and I will most likely be standing on an elevated stage for most of it. I don't mind cheesy tricks (I might even do the string of handkerchiefs up the sleeve gag). Illusions that can be used in "combat" are very welcome. So, if you have ideas, or know of any websites that will help, I'd really appreciate. I've looked through Instructables, but haven't found much, so if you know any good ones, assume I missed them.

Asked by NunchakuMan 6 years ago  |  last reply 6 years ago


Ant Killer!

It seems every year we get ants in our kitchen. I don't know if its a seasonal thing or just coincidence.This time, however, we were able to effectively combat them with a home remedy. We mixed boric acid & sugar in water and set the concoction in a few little lids across the kitchen. We used roughly a 1:1:1 ratio, but it isn't an exact science. It's also not important if it doesn't dissolve completely.The idea behind this is that the boric acid will not kill the ants instentaneously. In fact, the sugar will lure ants to it. Also, this amount of boric acid isn't harmful, even to most pets. I don't have any pictures to do an instructable, so I thought I'd share it here. If someone else does this, feel free to do an instructable. (no credit needed)

Posted by zachninme 10 years ago


Anyone else in midterm slump mode?

If so, let's whine about it together. :D I'm ready for the semester to be over. I think I have a little too much on my plate this year. I have to go to a big conference next Friday, and I have so many papers and presentations coming up that I want to scream. The only class I really care about is A & P - and that's making me suffer in my other classes because I'm not studying for them as much. But of course, I'll be procrastinating instead of doing something right now to combat my anxiety. Sort of like this five page statistics midterm that I'm working on right now... which I've had a week to do. It's due at 4:30. :P

Posted by jessyratfink 11 years ago  |  last reply 11 years ago


Really Cool How To Draw Videos!

Hi, I'm Anut and I created some fun How To Draw videos. I currently have over 500+ videos so please come check them out. I'm also interested in seeing videos made by other users on this forum because they are a great way to learn. Here is my YouTube Channel: http://youtube.com/anutdraws Also add me on DeviantArt if you got one!: http://anutdraws.deviantart.com

Posted by anutdraws 5 years ago  |  last reply 5 years ago