Electric motor

What would cause an electric motor, running a table saw, to suddenly start running at a faster speed than normal?

Topic by tablesawguy 4 years ago  |  last reply 4 years ago

electric motors

I am considering motorizing my bike for my work commute. However I don't have enough knowledge about motor output as in torque / rpms to be able to determine what kind of characteristic I should be looking for. For many of the electric motors I am finding online, it doesn't really say the torque output. Is there a spec such as watts that I can judge a motor by? What specs should I be looking for in a motor that can assist in moving my weight. Or an links to good knowledge sites would be great too. Thanks.

Topic by aeneas shrike 10 years ago  |  last reply 9 years ago

Electric Motors?

Can a 3/4 HP electric motor ( from an old garage door opener ) have enough power to be put in a bike and get at least 10 MPH out of it. Also what batteries should i use, i think i have an 18v or 16v battery somewhere..

Topic by Katarukito 10 years ago  |  last reply 10 years ago


Anyone out there no a way you can convert a 0.5HP electric single speed motor to a variable speed motor (if it can be done)

Topic by splott 11 years ago  |  last reply 11 years ago


Ok so i have a little problem here... i want to make a little electric motor go forward and backward by pressing a single button for each move (so 2 button in total) i got a little image ( poor quality i know but youl get the point) of what i did but its doesnt work :/ thx

Topic by koax 11 years ago  |  last reply 7 years ago

seized electric motor

I'm trying to fix a dishwasher. The pump motor seems to be seized. It doesn't __feel___ that stuck, and has spun for me 1 out of 5 times. Any ideas on how to fix it?

Topic by Toga_Dan 6 years ago  |  last reply 6 years ago

Electric motor specs? Answered

I have the disc motor out of a Polaroid portable DVD player, and would like to use in one of my projects. However, it doesn't have an indication of what power it needs on it. There is a serial number or item code on the side, but no manufacturer to check for a data sheet, and Googling  the code (TM2458 on the top line, GG54 on the bottom line) yields no results. I need enough information to power the motor using either a battery or Arduino. Please help?

Question by Levitationist7 6 years ago  |  last reply 6 years ago

electric bicycle motor?

Okay, Im thinking of turning my bicycle (a "Quasar Bounty") into an electric bike.  it already weighs about 30-40 lbs. And I want it to go at least 30mph. Can someone please suggest a motor I can use, and what battery I should use? Thanks, Michael McPherson (mmcpherson4)

Question by mmcpherson4 9 years ago  |  last reply 7 years ago

Inchworm Motor?

Is it possible to build an inchworm motor? Or does such a thing exist where i could hold it in my hands?

Question by lutziepv08 9 years ago  |  last reply 9 years ago

electric bike

I am working on a motor bike that i had originally decided to go gas with but the motor dosent work anymore so i changed my mind and went electric. i was wondering if i would still need a jackshaft with an electric motor. it is a 24 volt motor out of  a powerchair.  i don't know specifics on tourque and hp, but it's pretty powerfull, and turns quite a few rpms. any help would be appreciated. thanks.

Topic by the mechanical engineer 8 years ago

Rugged motors?

Does anybody know of a source of motors that are rugged enough to survive long-term* on the surf-line of a beach?  They wouldn't need to survive flying rocks, but saltwater and sand proof would be good. The plan is to use them in reverse, as generators, so DC is preferable. *In the first instance, "long term" means "more than half an hour".

Question by Kiteman 6 years ago  |  last reply 6 years ago

Brushless Motors

I have a few fans around from computers. Seems that 3 wires is pretty common for these. I wasn't sure which was what, so, I figured "nothin to lose" and hooked up the right voltage across 2 wires. My guess was right. It ran. But, having 1 out of 9 fanblades busted off, it shook a bit. So, I busted off 2 more blades to balance it. But now, even connecting it the same way, it doesn't run. So, how should a 3 wire brushless motor fan be wired?

Topic by Toga_Dan 4 years ago  |  last reply 4 years ago

electric bicycle

Ok, i wanna take a old bike and put an electric motor on it, with a solar charged battery. what i wanna know is, what are my options on motors if i wanna use recycled components? can i use a motor from a; washer, dryer, blower fan, ect? i would like to be able to have something i can get around town with(not assisted)

Topic by golddigger1559 7 years ago  |  last reply 7 years ago

Electric scooter?

Has anybody made a electric scooter that is ran off of a drill motor that takes 7.2v?????

Question by TSC 8 years ago  |  last reply 8 years ago

electric car

Ok i want to build an electric hybrid system my first question is ac or dc power. i want to build a paralleled drive system. that uses the stock motor to drive on the highway with maybe a little help from the electric motors. here are my thoughts start with a f250 powerstroke diesel crew cab truck, install a divorced t case and new drive shaft, hook the electric motor to the t case front axle output. the goal is to use the space by the tool boxes to fit the batteries and later update the alternator. the goal here is a hybrid that can still haul what a normal truck can but run purely on electricity when in town

Topic by dkeller8 6 years ago  |  last reply 6 years ago

Electric mower

I want to convert my old gas mower to an electric mower. 12v batteries are easy enough, and there is plenty of info re solar charging systems. I'm stuck on sourcing the motor. I was wondering if a car starter motor would be sufficient for running a lawnmower? It's a 12v motor, has enough oomph to turn over up to 12 cylinders of american steel, and there are plenty of 'em out there in junkyards waiting to be recycled. Sounds good on paper. Anyone have any insight into why this is or ain't a good idea? Thx- Rev. Bucky

Topic by RevBucky 10 years ago  |  last reply 10 years ago

100 hp electric motor

Is it possible to make a 100hp electric ac motor? I have a workshop so all tools are available. Using ndfeb magnets or electromagnets which are efficient for this electric motor any one know about this plz help even small help is admirable .....................

Topic by kacarot 8 years ago  |  last reply 8 years ago

Slowing down an electric motor? Answered

I am on radio shacks website looking at a 1.5-3VCD hobby motor.   The specs say up to 8,300 RPM at no load.   If I added resistors to this, would it slow it down?  I want it very slow, like 1 rotation every 3 seconds. lol   Thanks

Question by pennsteve 9 years ago  |  last reply 7 years ago

Slowing down an electric motor?

I am working on getting all the supplies together for my first instructable.  The item I am building (not giving out many details) will have 5 different motors on it.  I think all motors will be the same model.  However I want one motor to run quite slower.  Can I do this without having to run it off a lower voltage power supply.  Now that I think of it I suppose there is plenty of room in my item for a 2nd power supply.  But this will still be good information for me to have in the future.  Oh and the main power supply for the item will be either 3 - 6 volts I believe.  AA batteries in case this matters at all.  Thank you in advance for your help in this matter.

Topic by jcaresheets 8 years ago  |  last reply 8 years ago

FS: BIG electric motors

've got three 36v forklift steering motors. They're big, beefy, and used. Rated as 1 1/3 HP "special" duty. They draw 4.1A no load at 36v. With the gearbox, they draw 4.3A no load. Speed for the motor alone 3225RPM , with the gearbox is 75RPM. Torque must be something outrageous. They have an optional mating 43:1 Sumitomo-made gearbox which I reckon would make these some great drive motors for a large heavy project. Without gearbox, they would be excellent for go-karts, suicidal ebikes, etc. I even know of a e-car project that used a similar motor. (forkenswift) The motors alone weigh about 18lbs. Not sure what they weigh with the gearbox. You want one. I have three. I'm asking $100 each for the whole motor/gearbox shebang. Pictures:http://www.majhost.com/gallery/Ned/misc/big_motor1.jpghttp://www.majhost.com/gallery/Ned/misc/big_motor2.jpghttp://www.majhost.com/gallery/Ned/misc/big_motor3.jpghttp://www.majhost.com/gallery/Ned/misc/big_motor_4.jpghttp://www.majhost.com/gallery/Ned/misc/big_motor_5.jpghttp://www.majhost.com/gallery/Ned/misc/big_motor6.jpg

Topic by nedfunnell 10 years ago  |  last reply 10 years ago

Increase the speed of an electric motor? Answered

My electric bike, seen here, was built for my senior project. I was limited on motor choice, and had to go with the best I had, an old powerchair motor. After 2 successfull attempts at building an electric bike, I have discovered that it is impossible to go faster that 25 mph with with one of these motors. As you can see on my instructable the bike has 6 speeds, with a top speed of 20mph in first gear. however, when I shift gears, the motor rpm's decrease instead of the speed increasing. I have heard before that it is possible to run an electric motor at higher voltages than it is rated, so I was wondering, if i could add a seperate switch and a "booster battery" of sorts, that as long as I monitered the voltage so as to not let exceed 24 volts, if this would be feasible. My only other option would be to add a second motor in parallel with the first, and on the same drive belt. The first option would be the easiest, if it could work without damaging the motor. Any help would be appreciated. Thanks, iloveairsoftstuff

Question by the mechanical engineer 7 years ago  |  last reply 7 years ago

Electric Motor Tricycle 6V4.5Ah

I bought a riding toy for my son and it's cool, but it doesn't have enough power sometimes.  It's fast enough in the house, but it gets stuck outside.  The plastic wheels tend to slip on rough surfaces and inclines, but I can address that issue at the wheels/tires to some degree.  However, the battery that came with it is a 6V4.5AH/20HR sealed lead-acid rechargeable battery (It has F1 contacts, so unless I change or adapt the wires/connectors, I think I need to stick with a battery that has these).  The AC-DC adapter has 6V DC 500mA output, but I think I could get a UNIVERSAL AC DC ADAPTER {1.5V 3V 4.5V 6V 9V 12V 500mA} that would work with a new battery. I'm hoping that I can increase the power noticeably but safely.  One constraint is the width of the battery area inside the "engine" compartment.  It fits the present battery (1.75 x 2.75 x 4), but I'll have to mod the compartment to fit a replacement that's more than slightly bigger. I've seen some 12V4.5AH batteries online, but most are larger in every dimension. Am I even on the right track thinking a higher voltage battery is what I need?  Could I use an NiMH or Li battery/batteries instead? What's the easiest, safest, cheapest route for this mod? Thanks, Dan

Topic by danhorowitz 5 years ago  |  last reply 5 years ago

would this motor produce electricity? Answered

I made a bike generator and I want to add a brushless motor to it so I wont need to replace it or the brushes. I am looking at the brushless motor at this link.

Question by TOCO 9 years ago  |  last reply 9 years ago

Electric bike motor help!

Helli guys.. after a long time racing motocross, I would like to experiment into doing an electric dirt bike for myself.. My plan is to find an 85 or 125cc frame with no engine, and build from that.. the biggest question is, what motor could I use that is no less than 15kw, and on the affordable side? I was looking at the Turnigy Rotomax 150cc eqiv. And it has a max power output at 9000 something watts, would that be any good for a motocross bike? Would it burn out quickly since its pretty small? Notes: i am strictly looking for powerful bikes, a 2kw bike is not for me since I am used to overpowered 250cc two stroke hell-born suicide machines, thanks..

Topic by dsirotic 2 months ago  |  last reply 2 months ago

Electric motor running backwards

I have an electric motor on a large Hobart vertical mixer 80 quart.I had the brushes replaced and put it back together It now runs in reverseIt is a single phase motor with four brushes that have no power to them there is no capacitor eitherIt is an old style motorAny help would be greatly appreciated even what type of motor this isThanks David

Question by David Ferguson 1 year ago  |  last reply 1 year ago

Cordless electric drill motor.? Answered

I have been experimenting with an old motor from a cordless drill no markings on it - Any one have any power information for these motors - they seem to produce a LOT of torque for such a small motor.? I find I can lift 4 Kg fairly easily - I guess I could do it the old way and measure and calculate HP.

Question by rickharris 8 years ago  |  last reply 8 years ago

Motorized/electric vertical blinds?

I have some vertical blinds in my living room that are manually driven via a cord to tilt the blinds and another cord to open or close the blinds. I wonder is there a conversion kit to open/close and tilt them electronically via a remote control? I have found some kits from hundreds of dollars to thousands, but know I could find one or build one for way less. Any thoughts or ideas?

Topic by flaresider80 7 years ago  |  last reply 5 years ago

controlling speed of dc motor Answered

Hey guys I'm trying to finish a project.  I have a motor thats making a 5 gal bucket spin, I would REALLY like to be able to control the speed but I'm not sure how to go about it.  Right now it's spinning extremly fast and to unstable The motor I used is decently small cgi.ebay.com/DRIVE-MOTOR-DC-GEARMOTOR-12VDC-DRIVE-SYSTEM-NEW_W0QQitemZ300327674056QQcmdZViewItemQQptZBI_Robotics I've read similar problems and ppl suggest PWM what size do I need for the motor I have?

Question by micha3l87 9 years ago  |  last reply 9 years ago

Electric bike generator?

I have an electric bike that has a 24 volt 450 watt motor, running on the back wheel.  would it be possible to fit a front hub motor  on the front wheel to ether help with charging the battery's while using the electric motor to run the bike or be able to power the motor when you have started to move.  If this is possible what size hub motor would I need in the front wheel and what modification would I have to make.

Question by AlanV23 1 year ago  |  last reply 1 year ago

AC motor power supply

I have an old Dayton electric motor I pulled out of a lab blower. (I have no idea how old it is, I pulled it out of my grandpa's bottomless basement.) It looks like it still works, but I found it with no wires or anything attached to the terminals. (All of the internal connections look good, however.) So, here's the tricky bit, how do I run power to it? I copied everything off of the label on the motor, and I'll post it on the end. I've got very near to 0$ in the project bank, so the cheapest I can possibly do this the better. I don't need anything nearly as sophisticated as speed control, or anything like that. Here's the info from the label: model: 5K261 HP: 1/3 RPM: 1725 V:`115 A: 5.4 Hz: 60 Time Rating: Cont. Temp. Rise: 48C PH: 1 Frame: 56 Brgs: Sleeve Code: H S.F: 1.35 S.F.A: 6.0 Amb: 40C No.: S60CXCDY-4065 Insul: Class: A Thermally Protected: AUTO I'm not quite sure what I'm going to do with it yet, that depends largely on how well it works.

Topic by Helioskannon 11 years ago  |  last reply 11 years ago

Automatic window cover motor

I have a problem in my apartment with an outdoor light right outside my window. If i dont close my curtains at night my room pretty much looks like daylight. I like to wake up to the sun though so I started looking at automatic curtain openers, saw the price and decided it cant be that hard to diy. My idea is to have a curtain that rolls up rather then goes to the side. I am trying to think of a way to make this simple cheap and quiet. really all I need is a rod and fairly quiet motor that I can plug into a wall. I was thinking a rotisserie motor would be pretty good but have never been near one to hear how loud they are. It might solve the problem of a rod as well depending on how long of a stick I can get for it. Anyone have any other ideas of a better way to do this?

Topic by iamme9182 10 years ago  |  last reply 10 years ago

Motorbike starter motor on a Scooter?

Hello! I changed the starter motor on my bike some years ago, and this motor is laying around in my garage since then, working! I always wanted to build an electric vehicle, and i would like to start with an electric scooter! My questions are:  1. Would the motor work and run on a scooter? 2. how much would the battery last? I plan to use a normal motorbike battery, i dont know much in electronics, they are 12V and 10-70Ah 3. will the motor heat up and burn? 4. what range would it have? The motor in question is a Mitsuba, aftermarket mounted on my bike a Honda CR 250 if this helps. Thanks in advance!

Question by dsirotic 5 years ago  |  last reply 3 years ago

Green Motor

Hey, i am not good at electronics, but heres the idea: i have "planned" an energy saving motor. Anyway there would be a motor, say, driving a bike. The on the wheel's gear we could put another motor, which is for producing electricity. I am not too sure, but i think it produces AC current. But we need DC to drive the first motor (the one moving the bike). So hook up an AC to DC converter to the second motor (the one producing electricity). Then hook some diodes to the wires connecting the first motor from its power source. I think the wires going out from the power source needs diodes, too, since it allows current to flow in one direction (technical term called forward biased? ). To prevent the first motor driving the bike from "burning", a voltage regulator and a current regulator should be needed, right? That's basically the plan. I would be glad to be corrected if i got anything wrong. Thanks.

Topic by J50Nunlimited 10 years ago  |  last reply 10 years ago

what could you do with an electric motor?


Question by chris314 9 years ago  |  last reply 7 years ago

Speed control for AC electrical motors

I want to use a GE A-C motor (5KC33GG101): Connection Type and Voltage Rating in Volts: 115.0 line to neutral single input Rotor Speed Rating in Rpm: 1725.0 single full load Frequency in Hertz: 60.0 input to run a 50' line on pulleys for a Halloween project but it's too fast. Can anybody help me figure out if I can buy/build a controller to run it slower?

Topic by mario-alonzo 1 year ago  |  last reply 1 year ago

Which electric motor for which project?

OK, so I got two projects for this winter. One - building a lathe for woodturning. Not a mini-lathe, but a bit more serious piece of equipment that I could use for some furniture details. Two - apple mill for cider. And I have two salvaged electric motors laying around. One is from an old Remington chainsaw, 1400 W and probably some quite serious speed. The other one is from a pump, actually water automate that sat on my 15-meter borewell. Do not have the data, but most probably slower (and it is way bigger). Problem is, I have zero experience with such stuff. For setting up the electricity side I will probably call in the cavalry, but first i need to decide, which motor I will use for which purpose. So, any advice, gurus?

Topic by wahur 6 years ago  |  last reply 6 years ago

Making a large electric motor from scratch

I searched the archived threads and found quite a bit alreadydiscussed here about making very simple and small electric motors fromscratch. What I want to do is to make a fairly large and powerful one(say, somewhere around the size of a coffee can). This is for asculpture project, and the motor will be driving a kinetic mechanism.I'm pretty handy, have a extensive range of tools and am comfortableworking with high voltage. What I am not, however, is knowledgeableabout designing or making electric motors; hence my questions.I understand that I'll need to wind armatures and so forth, but Idon't know what the advantages/disadvantages would be of making a DCversus an AC motor (either power could be supplied), nor do I reallyunderstand the differences between the various types of those two. Themotor needs to be able to start by itself under load (as opposed tosome homemade electric motors that seem to need a nudge to get going).Simplicity, low maintenance and ease of construction would be a plus.I had thought of making a homopolar motor such as they have at theExploratorium (http://www.exploratorium.edu/cmp/exnet/exhibits/group5/daisy/index.html) but it seems that homopolar motors like this cause considerable wearto the part that acts as a brush, which will work against my goal oflow maintenance. Unless...perhaps I could use a rolling conductor (like a precision bearing) as a brush? Does that make any sense?Thanks for any advice!

Topic by Bricology 10 years ago  |  last reply 10 years ago

How do I calculate the RPM of a electric vacuum motor?

I have a Johnson 12amp 120v 60Hz vacuum motor that I scrounged out of an out of commission vacuum cleaner and was curious of its RPM's to see how it would have to be geared to fit my project needs. If anyone out there can help me please speak up.

Question by greensmith7 9 years ago  |  last reply 6 years ago

I have a small music box that opperates using an electric motor. The motor is turning to quickly.

The motor has a resistor at the power supply connection and then there is another item which is either a resistor or capicator at the motor connected to the power supply at the motor. Is it possible that eiher of these have failed causing the motor to turn to fast or maybe not slowing it.

Question by Tietoes5s3a 7 years ago  |  last reply 7 years ago

Need help

I have a small 1/4 HP electric motor that runs @1750 rpms  I tried to put a basic dimmer switch on it to help regulate the speed but it it still runs wide open. Should this work or what can I do?

Topic by captinkickass 6 years ago  |  last reply 6 years ago

Help figuring out electric motors

I'm trying to decipher the mystical language of electric motors and need some help. I was at one of my favorite stores yesterday, a place called 'Industrial Liquidators' here in San Diego, and I was looking at their vast supply of electric motors. Big ones, small ones, battery operated ones, flat one, all in latest styles and fashionable colors. I know of plenty of uses for these things but I have no idea what it is I'm looking at. I would like to make my own rock polishing tumbler, so I'd like a motor with a bit or power and a slow rotation, but how can I figure out how strong and fast a motor is?Maybe I'm starting at the wrong place. I must admit that I know next to nothing about electrical stuff. Pretty much the only thing I know about electrical equipment is that it only works when you plug it into a socket.So that being what it is, can anyone direct me to a website that explains how to read these motor labels? Ya know the ones that say how many ohms, volts, amps etc.Thanks for any help.

Topic by astro347 10 years ago  |  last reply 7 years ago

electric micro kart

I want to build a micro kart with a range of 10 miles at an average speed of about 5mph, with a reverse function. Iv been looking at blogs and Instructables for micro karts and DIY electric longboards hoping to directly copy the basic components of another project however all the projects iv found are for high speed machines that often need a bump/kick start and i need something that will happily run at consistently low speeds without an assisted start. I don't have the electronics knowhow to work out what combination of motor, battery and ESC i need but from what iv read it sounds like i might need an outrunner (?) type motor which is apparently good for low speeds and high torque. Iv been looking at the Turnigy motors on the Hobbyking website as they were recommended by a few blogs, i tried posting this question on their forums a week ago but got zero response. Could you take a look at their motor selection and recommend the appropriate combination of parts? Thanks

Topic by ambientvoid 3 years ago  |  last reply 3 years ago

how to select motor for any project?

What is the formula to choose a motor to lift load? what parameter should have to consider while selecting a motor?  how much power it consume? which is the best motor for project(say to drive a vehicle/car) brushless dc motor or any other?

Question by ashu13 5 years ago  |  last reply 5 years ago

Electric Mountainboard Build? Answered

Hey guys I am planning on building a semi cheap electric mountainboard. I would like 20+mph(25?) and am thinking that this is what i will need: Board: http://www.amazon.com/ATOM-91115-Atom-90-MountainBoard/dp/B002ZFBYYY/ref=sr_1_1?s=sporting-goods&ie;=UTF8&qid;=1315867971&sr;=1-1 Motor: http://www.batteryspace.com/DC-Motor-Heavy-Duty-24V-DC-Motor-750W-2600RPM-28A-rate.aspx ESC: Im not sure on this one, HELP! I would like a rc esc not a scooter controller. Batteries: 2x http://www.batteryspace.com/nimhrechargeablecellcsize12v5000mahwithtabs10pcs.aspx OR 2x http://www.batteryspace.com/sealedleadacidbattery12v75ah20hrsforupsseascooterande-bikes.aspx Transmitter/reciever: http://www.hobbyking.com/hobbyking/store/__10608__Hobby_King_GT_2_2_4Ghz_2Ch_Tx_Rx_.html (Or something like this, I'd rather not buy from Japan for shipping costs.) Will a rc esc work and talk with my motor? They are both DC but idk if they will. I know battery type doesnt matter as long as the esc gets the power. So I was wondering if you could help me find a suitable brushed 24v 28a+ esc... Thanks I hope this will be a fun project!!

Question by chopstx 7 years ago  |  last reply 7 years ago

Electric Bike Plans? Answered

Hey guys. I was thinking of building an electric bike this summer. The problem is I've never built an electric bike before and barely have any knowledge. I just wanted to know if it would be better to buy a ebike kit or to buy separate parts and build it. I have looked on Ebay for bike motors but i could only find up to 1000w kits for about 200-300 dollars and i thought that wasn't worth it. Is that the only price I can get a motor and do you guys know any good stores and sites to buy a cheap ebike motor. the other parts wouldn't be that hard to find so it's OK if you don't know of any kits. Thanks. P.s. I'm looking for Motors above 1000 watts

Question by amelaboy 7 years ago  |  last reply 6 years ago

Build an Electric Car

Want to convert your car to all-electric on the cheap?  Check out bennelson's awesome Instructable, Build your own Electric Car!  Ben walks you through the steps of converting a Geo Metro (purchase price $500, gas-requiring parts sold for $550) to run on a forklift motor and 6 12V batteries.   According to his calculations, the car gets the equivalent of about 130 mpg.  Not bad for an entirely self-taught mechanic! Check out the video of his converted Metro going up hills: Sounds easy, right?  So when are you planning to convert your car or truck? This post has been sponsored by Pepsi. The Pepsi Refresh Project celebrates the people, businesses, and non-profits with ideas that will have a positive effect on our world.

Topic by canida 9 years ago  |  last reply 7 years ago

10 hp electric start motor

I just purchaced a 10hp briggs 4cyl electric start go kart motor and im needing help figuring out how to rewire the switch. (wires were cut) anybody know where i can find a wiring diagram for it or an instructable on wiring it? any help is appreciated thanks.

Topic by kdf.inc1969 5 years ago  |  last reply 5 years ago

Do brushless motors produce electricity?

 I built a bike generator. My science teacher recommended installing a brushless motor instead of my brushed one. 

Question by TOCO 9 years ago  |  last reply 9 years ago

speed control for A-C electric motor

I want to use a GE A-C motor (5KC33GG101): Connection Type and Voltage Rating in Volts: 115.0 line to neutral single input Rotor Speed Rating in Rpm: 1725.0 single full load Frequency in Hertz: 60.0 input to run a 50' line on pulleys for a Halloween project but it's too fast. Can anybody help me figure out if I can buy/build a controller to run it slower? Thanks in advance!

Topic by mario-alonzo 1 year ago  |  last reply 1 year ago