HAND TATTOO?

How do I apply henna to my hands.  Where do I get hold of free patterns.

Question by 1390 8 years ago  |  last reply 8 years ago


halloween hand

Surfing around the internet today I stumbled upon this gem, looks like it would be well suited with some of the other ghoulish delights I've seen bouncing around Instructables. (it's meatloaf!) link

Topic by mikeasaurus 9 years ago  |  last reply 9 years ago


hand shocker?

Im trying to make a killer joy buzzer like the one that The Joker uses, ive been twisting my head around it for a while and i think i have the propper electrical map, but i cannot figure the voltages or if im missing any component or having an extra component (not needed) i want the resulting shock to be 40 v. i am hoping for the comunity to help me get this done, and i would post an instructable about it, because i havent found one here, not yet ;) so i await for your sugestions and answers to my predicament. thanks until now ive got: three 9v batteries conected through a caliber 22 cable to a switch, then to a 12v buzzer and then the contacts...ill upload the scheme later

Question by fmolina3 6 years ago  |  last reply 4 years ago


my broken hand

I broke my left hand now get ready to laugh...i slammed it in an old '77 cadilac door (OUCH). i cracked my 1st knuckle dislocated my index finger and fractured my bone that goes from your knuckle to your wrist (OOOOOOOOOOOOOOOWWWWWWWWWWWWWWWWWWWWW)

Topic by darth acexxacer 11 years ago  |  last reply 9 years ago


knez hand gun

Hey people i don't really like the pinned hand guns so can you people make me a tottaly awesome sling shot with range of about 100 ft. the reason is i don't really get most pin guns to work and the don't fire the far and also can you make it really simple.So what I want is a easy K'nex hand gun slingshot prefered but pins will be accepted and and also make the simple have it have a scope or atleast really acurate and low piece list and long range add link to comment thanks

Topic by miniclipper 8 years ago  |  last reply 8 years ago


Hand cranked mixer

Hi all, i have a question, i found this great mixer http://www.cottagecraftworks.com/off-grid-hand-crank-mixer-food-processor but i live in europe and shipping cost will be over the top, and the product already cost alot i seen some great inventions here, is there someone who can make this or explain how to make this? thank you for your time (i hope it is allowed to ask this, if not just remove my post)

Topic by Clementine Tyson 3 years ago  |  last reply 3 years ago


Hand Icon on Avatar

You can skip everything I'm about to say and just read the image note on the image below, because that's basically my question: What does the blue bar with a white hand and a number on it mean? It shows up on my profile picture/avatar on comments I've made and my Instructables, and I have no idea what it represents. I've seen many other people with it, too, with different numbers. Can somebody explain the meaning of this icon to me?

Topic by AdamVigneaux 8 years ago  |  last reply 8 years ago


helping hands tool? Answered

Is there a tool OR SERIES OF TOOLS out there that can assist hobby enthusiast who have the misfortune of unsteady hands. Not quite Parkinsons but pretty bad. The mind still wishes to create and to solve technical problems, but shaky hands put a stop to a lot of projects...or just make completion time very slow. There are definitely high end medical robot arms that do the trick but for your average Joe, there's always budget constraints. We can't afford those expensive automated robot arm systems. So is there a RELATIVELY reasonably priced product that could be used in these situations?

Question by KevPerkins 6 years ago  |  last reply 6 years ago


Hand Gatling Gun

Is there a gatling gun out there that uses a crank or lever or something similar? If not can someone please make one? (No Y's Please)The ceiling only says 42 unless you look REALLY,REALLY hard-Airik Graves

Topic by airhead12 10 years ago  |  last reply 10 years ago


new hand gun

My strong hand gun

Topic by Pat Sowers 12 years ago  |  last reply 10 years ago


hand washing liquid?

How i can product a hand washing liquid?please help & give me a formulation ,thanks

Question by anoosh khan 7 years ago  |  last reply 7 years ago


Left handed drills? Answered

I recently came across a youtube vid showing removal of a broken bolt with a left handed drill bit. Other than the removal of stubborn bolts and studs  why do they make left handed drill bits? Both my rather old mains drills and the pillar drill all turn clockwise for right handed drill bits. Only the cordless drill has a reverse function.

Question by rickharris 4 years ago  |  last reply 10 months ago


Hand ground mirror? Answered

Any one hand ground a telescope mirror, how long did it take approx cost, UK suppliers of necessary parts, is it worth the effort?

Question by rickharris 8 years ago  |  last reply 8 years ago


Anyone need a hand?

I dont know why I did the title, but please ignore this topic if you are not Lowney, or spam this top all you want if you feel like it :-)

Topic by Hiyadudez 9 years ago  |  last reply 9 years ago


hand drill problems?? Answered

I bought a old hand drill for really cheaply it just needed cleaning up im having some problems how do i remove the chuck its stuck it dosent have any screws in the chuck so how do i remove it?

Question by sharlston 9 years ago  |  last reply 9 years ago


Vintage Hand Tool?

One end is pointed (maybe an awl) and the other has a screwdriver like blade (maybe a pry bar). It is cast or formed metal, 5 inches long and the blade end is 3/8" wide. My best guess so far is maybe a shoemaker's tool. Thanks for any help identifying this tool.

Question by bob73 7 years ago  |  last reply 6 years ago


spiral clock hands

I want to make a desk clock as a small project for myself. What I am looking to create is a slim clock with a spiral hour hand. The time would be told by graduated marks on the back-plate i.e. as the hour hand turns, the spiral increases and the correct hour is reached by the spiral, hard to explain, can't upload a photo as instructable server maintenance is under-way, hopefully I'll be able to upload the brief sketch I did in paint which might help!! What I am looking for is suggestions on a material which could be used for the hand, it needs to be thin so as to make it as easy as possible to tell the time and also strong enough not to distort under its own weight. Haven't decided whether it's going to be a normally incrementing spiral or a Fibonacci spiral (or similar logarithmic spiral)

Question by johnnie98765 4 years ago  |  last reply 4 years ago


Simple Hand Tool Right?

Hello All, There is a tool that costs about $500 that hopefully can be made for a whole lot less.  It's a chiropractic actuator (See Image).  If you have never see one of these tools in action before, you squeeze up with your fingers and down with your palm, which will plunge the top part of the tool into the bottom part of the tool (kinda like a toilet paper roll holder type of action when pushing the two ends together).  The top part of the tool goes down about 3/4 of an inch (while the bottom part of the tool stays stationary the whole time) and then somehow sends a hard tap to the end of the mechanism (maybe like an internal mechanism simulating something like a hammer coming down a nail or something). It's driving me nuts!  How can a tool this simple be so expensive!?  Anyone have any ideas on how to make something like this, maybe there is a tool that can be modified to do this that is out there already, or maybe there is something else that can simulate the action of this tool without breaking skin, bones, etc :) Thanks for reading and thanks in advance!!!

Topic by mvparish 7 years ago  |  last reply 7 years ago


What does the creepy hand next to a guide mean? Answered

On the guides part of the you page, what does the creepy hand next to a guide mean?  Whenever I look at the guides part of the you page, a creepy hand  is next to the guide.  What does it mean?

Question by thispageiscringeignoreit 5 years ago  |  last reply 5 years ago


hi! what is the littel pic of a hand next to my instruction mean?

Some of my post have the little hand pic and some dont, not as the project pic but next to the edit botten what does it mean?

Topic by galit 9 years ago  |  last reply 9 years ago


Build something for kids or adults for hand -eye coordination

Hi,First post. I need to find out how to build a setup to help train for hand eye coordination.I was thinking a stand up type affair where the person using it had to reach out and touch a button or step on button( i say button but it would be something with a micro switch I imagine and a disk operating it,made out of a circular piece of wood or plastic.) That corresponded to a blinking colored light.When the colored light blinked the person has to react and press the corresponding colored button with their hand or foot.Something would have to keep score also. Something like a whack a mole game in an arcade except a lot less moving parts. If anyone has any ideas or has built something similar I could really use the help. Thank You

Topic by Hitlist 10 years ago  |  last reply 10 years ago


how can i make a modal of my hand so i can use it as a shape to work on?

Question by mb inventor 6 years ago  |  last reply 6 years ago


How would I make a bidirectional hand pump like an air mattress pump?

I'm looking for a resistance machine like a pneumatic  air mattress pump; two types. One pump could handle maybe 120 pounds pressure. The other would be for about 80 pounds.

Question by Peter1001 5 years ago  |  last reply 5 years ago



What is this?

I was cleaning my closet and I found this. a used hand warmer. Being curious, I opened this sucker up and found black powder with what looks like a small bit of silver powder. My guess is its iron, magnesium, and salt.

Question by BADWOLF1 8 years ago  |  last reply 8 years ago


can anyone tell me how to program xbee using ardunio uno ?

I am making an "Arduino Wireless Animatronic Hand" by "njkl44" in which he told to program xbee using ardunio in which he has given program for ardunio software can anyone please tell me how to program xbee using ardunio (ardunio software) here is link for that project       https://www.instructables.com/id/Arduino-Wireless-Animatronic-Hand/?ALLSTEPS thank you.....and sorry for my bad English

Question by adesai5 6 years ago  |  last reply 6 years ago



contests results ?

Where can I see the contests' results of the woodworking projects  (I can see the invitations for contest but not the winers products.) Thank you Pessach levy

Question by pesssach 1 year ago  |  last reply 1 year ago


DIY ROBOTIC HAND CONTROLLER

I want to know about the DIY ROBOTIC HAND CONTROLLER second step the hand structure how it makes and work what is use to make hand and how it will connect to glove to hand the process is very confusing  

Question by aniket 369 2 years ago  |  last reply 2 years ago


Hand Painting Wine Glasses

I have always used Folkart Enamel paint to paint my wine glasses and never had any problems.   This paint is now changing to the GLOSS only in stores, I can't find it in the non-gloss anymore.    Why does the paint start cracking when I put on the 2nd coat of paint?  I'm cleaning with alcohol first, waiting 30 minutes, then painting and it still want adhere to the glass with a 2nd coat. See picture below. 

Topic by jccgeorge 4 years ago  |  last reply 4 years ago


What type of Hand-Planer is this?

My Grandpa recently gave me a super old Hand-Planer which I want to restore, But I don't know it's type... Does anyone know what type of Hand-Plane this is? I tried to search it on Google, And I think it might be a "Wooden Block-Planer", But I'm not sure I've attached pictures of it below :) Also, Am I supposed to say "Hand-Plane" or "Hand-Planer"?

Topic by Yonatan24 3 years ago  |  last reply 2 years ago


Homemade liquid hand soap?

Recipe for homemade liquid hand sopa

Question by trishanderson 10 years ago  |  last reply 10 years ago


Hand and number under image

What does the hand and number mean under the images?

Topic by anon_private 6 years ago  |  last reply 6 years ago


Sharpen hand saw blades?

Nowadays almost all hand saws are induction tempered. It seems such a waste to throw them out all the time after they get dull. Traditional hand saws could be sharpened with a triangular file and a special tool to bend the teeth outward. I guess sharpening can be done by means of a dremel tool with a diamond disk, but what about the bending of the teeth? Any suggestions?

Question by BobS 8 years ago  |  last reply 1 year ago


hand crochet and knitted goods

Check out my shop at www.mistyray.etsy.com

Topic by mistyray 10 years ago


Hand winding of helical springs?

Are there any thoughts on an easy way to hand wind a helical compression spring using simple hobby workshop equipment? Say, d = 0.25 mm, free l = 80 mm and shut force about o.5 N ( 0.1 lbf)

Question by Ozboat 9 years ago  |  last reply 9 years ago


Common materials for Clock hands? Answered

Hi!! I'm trying to create a clock out of a music CD and his cover... i've the mechanics and i've everything i need, i just don't know where to find the material to create the minutes and hours hands of the clock... Do someone of you know some common material that i can use to make them? something not too hard to be found... i've seen that usually they're carved out of some alluminium, not too hard or too fragile, easy to cut... If i manage to find the parts that i need i'll make a guide, i think that my idea could be appreciated :)

Question by FenriX 6 years ago  |  last reply 3 months ago


One-handed keyboard mod

I saw this on the MAKE Magazine blog.  A programmer (who actually knows how to bend metal :-) ) did a homebrew keyboard modification to allow himself to touchtype single-handedly after some left arm surgery.  Using his left thumb, he can hot-swap all of the keys on the left side over to the right and touch type with only his right hand. Read the whole story, including some guidance on construction, on Daughtrey.

Topic by kelseymh 8 years ago  |  last reply 8 years ago


The Case for Working With Your Hands

There's an interesting article at nytimes.com called The Case for Working With Your Hands that covers the appeal of getting down and dirty and fixing things with your hands. Instead of getting lost in cubicle land, the author encourages people to get away from alternate universe corporate realities and dive into a world where you can easily see the results of your actions.The trades suffer from low prestige, and I believe this is based on a simple mistake. Because the work is dirty, many people assume it is also stupid. This is not my experience. I have a small business as a motorcycle mechanic in Richmond, Va., which I started in 2002. I work on Japanese and European motorcycles, mostly older bikes with some "vintage" cachet that makes people willing to spend money on them. I have found the satisfactions of the work to be very much bound up with the intellectual challenges it presents. And yet my decision to go into this line of work is a choice that seems to perplex many people. The Case for Working With Your Hands

Topic by fungus amungus 9 years ago  |  last reply 9 years ago


Butane Lighter Hand Grenade

I planning to get this book,i mean, it's not like im going to make one, i'm just curious on how the heck it works. What do you think?http://www.campingsurvival.com/butlighangre.html

Topic by IlluminatedAntichrist 12 years ago  |  last reply 8 years ago


Meet the Boy With the Lego Hand

When Coby Unger makes, he makes the world a better place. The Atlantic recently published an article about the artist in residence and his work to build better prosthetics for children. Unger worked with a boy named Aiden Robinson to dream up the swiss army knife of prosthetics with attachments that include a Wii controller, spoon, legos, and a bow for playing the violin. Check out more of Coby's projects, and read the article to learn more about Aiden, the boy with the Lego hand. 

Topic by tinaciousz 4 years ago  |  last reply 4 years ago


Hand Crank Music Machine

Does anyone know about these small music boxes that play music? If you seen one, they're these small things that play notes in a looped sequence using small metal plates (kind of like a finger piano). Can anyone try to make something like that? Sorry for the small details if anyone's confused.

Topic by username252 8 years ago  |  last reply 8 years ago


Rolson hand tool sale?

Not sure if this is a local thing or whether it's also going on elsewhere, but Tesco in Cambridge is having a sale on Rolson tools: I got a pair of safety goggles, four pack of clamps and a junior hacksaw for a pound each, and there's more (mostly hand tools) to be had.  I know all the adages about buying cheap tools, but at that price I'd happily use them as raw materials for a one-off make.   UKinese members, check out the hardware aisle in your local big Tesco, thar be (potentially) bargains.  Now I'll have to work out something to do with them all...

Topic by PKM 7 years ago  |  last reply 7 years ago


New members: help is at hand.

You may feel puzzled or confused by aspects of the site - things that others seem to know, but you think are so simple you are embarrassed to ask about them.There is a group of members who have volunteered to help where they can.The members of the Volunteers group, are all happy to help - just send us a PM, and we'll do what we can, or pass you on to somebody who can do more.(Needless to say, if you want to be identifiable as somebody willing to help, then join the group.)

Topic by Kiteman 9 years ago  |  last reply 7 years ago


Battery Hand Gun/cannon

Ok, so I'm planning to make this instructable, it shoots out batteries at incredible velocities. It's fairly dangerous. It involves the use of match powder. However, it has come to my concern that people might worry or even hate me for posting this instructable. So I'm going to ask users on this instuctable if yes or no, they want me to post it. Here's a picture of the damage it can make. The first picture shows the side where the battery first stuck into the 3/4 inch thick wood, the second shows the other side where the battery left. So, do you want me to post it?

Topic by IlluminatedAntichrist 12 years ago  |  last reply 9 years ago


Any uses for a hand mixer?

I have recently inherited a powerful hand mixer. ex : images.google.com/images Making food has never been an interest to me, but I do have interest in the tool's potential. Inside the mixer is a 120V AC current (0.6A @60HZ) motor, along with several gears and the such.  This absolutely reeks of usefulness. I would normally already have half a million ideas for this, but problem is, I'm at an inventor's block. This is where I ask you to come in, instuctables.com. I want as many ideas for this as possible, I don't care how ridiculous.  Even if its a car that runs on pigsh*t, I won't mind.  anyway, just food for thought. thanks. ps. if you were one of the the whopping 13 people who viewed my forum topic, yes, this is a repost. I think my reasoning is pretty dang obvious. pps. I'm mad about not being able to use bold font anymore... we had something going...

Question by rocksalt2342 9 years ago  |  last reply 9 years ago


Jon Boat hand cart

Hello all, it's been a long time since I've posted anything here.  I look at the site at least once a day though, just to see whats new. Anyhow, what I have is a 12 ft john boat that needs some sort of wheel attachment so that I can pull it through the woods between ponds with relative ease. What I have is a little bit of aluminium pipe and some wheelchair parts, as well as various nuts and bolts.  I need a solution that involves no welding or brazing ( i think thats what its called ).  I can cut/drill/bolt all day, but thats about it.  Ive got a couple pics of what i have to work with.  Any ideas would be great.

Topic by kithso 4 years ago  |  last reply 4 years ago


Hand powered boat propellor? Answered

I am trying to build a boat for a physics project, and i wanted to try building one that used a propellor instead of the usual paddlewheel or oars that other students have used.  I bought a 2-blade trolling propellor from Walmart, and i plan on attaching it to a crankshaft via a 4:1 belt drive ratio (so with every rotation of the crankshaft, the propellor spins 4 times). Two people will be turning the crankshaft , and the boat itself is stocky with a flat bottom and pointed end. Is this even possible, and will it actually get the boat to move at a reasonable speed? ("Reasonable" meaning rowboat-ish speed)  I included a quick sketch of what im talking about, and a picture of the blueprints to the civil war submarine that I got the idea from, just for proof of concept. 

Question by masterbuilder 5 years ago  |  last reply 5 years ago


Hands-on Weekend Algaculture Workshop

October 18-19, 2008@ The Algae Lab in Berkeley, CAalgaelab.org: a component of The Shipyard / All Power LabsIt's a fact. Food, fuel, fertilizer, fresh water, and arable land --all are running out. But there is a crop that can grow in salt water,on true waste land, creating all the products we need by eatinggreenhouse gases and water water. And can grow 100x faster thanconventional crops. Algae! A truly green crop for a sustainablefuture.We are the Shipyard algae lab community. We have created the world'sfirst community algae lab -- for development of open source,DIY-oriented algae technology, to facilitate the co-operative pursuitof this new form of agriculture -- and we invite *you* to come learnhow to raise algae and transform them into exciting products!Whether you are looking for a job in the exploding algae biofuelsfield, or thinking about creating your own farm, we can help you getup to speed! We have created an independent, non-profit algaelaboratory for teaching and research using low-cost, widely-availablematerials, and we qould love to teach you how! Get on board with thisexciting, expanding field that's truly "green"!Over the course of the weekend we will teach you:The current state of algae farming technology, and where it's headed,What algae are interesting, and for what purposes,How to obtain algae strains,How to figure out the right nutrients for your algae,How to design and build effective ponds and bio-reactors,How to "grow out" your algae into a full-sized pond or bio-reactor,How to monitor the health of your algae, andHow to harvest your algae and make them into food, fuel, and fertilizer!All levels of experience and expertise are welcome. Graduates areeligible to become members of our lab and to use its facilities.October 18 & 19th, 11am - 6pm1010 Murray St, Berkeley, CA 94710$150 per participantmore info: [www.algaelab.org algaelab.org]contact: workshop@algaelab.org

Topic by noahw 10 years ago  |  last reply 10 years ago


how to prepare liquid hand wash soap industrially?

Question by pallavishivdas 9 years ago  |  last reply 9 years ago