Line Rider

Http://www.official-linerider.com/play.htmlIts ace.Best game EVER

Posted by HBF 11 years ago


My line rider videos.

Well i felt like showing off my line rider videos. This was my first one. Second one. Third one and maybe my best. My latest one made like 30 minutes ago.I just felt like showing them off and if anybody else has any put them here.

Posted by Easy Button 11 years ago


Simple question, trying to make line in on casette-less boombox, can't find amp outputs

So I have this little radio boombox with no casette deck and I want to hook up my mp3 player to it. I'm trying to find where the amp outputs are so i can solder on a line in cord, anyone have info that would help me? I'll post pictures in the day time tomorrow when I can use the camera.  Thanks DIY'ers, DIY or die ps: I was thinking I could just take the spliced line in cord and probe around on the solder bumps until sound starts coming out, would this harm my mp3 player?

Posted by savetheworldaskmehow 7 years ago


Comment post-processing does not respect line breaks in PRE-blocks

I have just noticed that the post-processing done when a comment is posted does not respect line breaks included inside ... blocks.  See, for example, my reply to https://www.instructables.com/answers/How-do-I-include-code-in-my-instructable-and-not-h/.  The preformatted text is shown as a single line, but entered it as three lines:   The text seen here   is in fixed format,   sort of like source code. Notice the line breaks, which are respected when I type stuff like the above in the WYSIWYG box (so the tags get converted to </> entities).  Here is exactly the same five lines of text entry pasted into the Source interface: The text seen here is in fixed format, sort of like source code. As I'm looking at it now (in the editor), there are three separate lines, all in typewriter font.  However, when I publish this, that is likely to change...

Posted by kelseymh 8 years ago


trigger signal for video line

Hi, I'm having a project which need to send trigger signal to oscilloscope. i should make a circuit that will allow me to trigger oscilloscope on specific lines in a video signal. Please give me some idea so i can go ahead. thanks in advance

Posted by sofia14 3 years ago


music string

I was wonder how to make a electronic harp by connect the line to sound sensor. any one can help?

Posted by carlosong 7 years ago


Straight line art - what is the technical name?

I remember back in 2nd, 3rd, 4th, and I believe even 5th grade, when I was in a gifted program, we had to draw. We drew only straight lines, and when we did it right, it made a curve. We would get a paper with 2 lines, connected at a vertex, at a 90 degree angle. We would draw points every centimeter or so, and connect the points, far to close, far to close. (It's hard to explain.) I'm searching for it on the Internet, but I can't seem to find the right word. Does anyone know it? Thanks, and if it turns out all good, expect an Instructable on it mid- to late October.

Posted by Bran 11 years ago


HEMI no programing required !

Hello  I am interested in build a simple mini line following robot  like HEMI dome shape design, has any one here built this robot ! or ones like it, and information on where to get parts mini or micro gear box, and motor and mini wheels to fit as well as mini circuit boards or I will make one via you tube . . Thanks any help appreciated  David  

Posted by beginner 1 10 months ago


Bamboo 'stanchions' base...?

I'm working on a set of stanchions for a 'Green' event, as we are expecting quite a few people lining up out front of our booth. I'm thinking about bamboo canes for the poles, with holes drilled near the top to allow 1" manila rope (or similar) through, but I'm not sure how to make them stand up, what to use for a base. Ideally it should be enviro-friendly, cheap, light and durable. That's not too much to ask, is it.....?

Posted by RustyCrow 8 years ago


When will PM formatting be fixed?

Private messages, whether written by hand or generated by Robot, get completely stripped of their line breaks.  A message which is sent out reading, Instructables member XXX just sent you a patch! You can read the message, below, and then click through to your Profile to see the patch itself. --------------------------------------- You're a YYYY... ... so does the patch make you cringe? (If the animation works...) --------------------------------------- etc. What gets received and displayed in my I'bles mailbox is Instructables member XXX just sent you a patch! You can read the message, below, and then click through to your Profile to see the patch itself. --------------------------------------- You're a YYYY... ... so does the patch make you cringe? (If the animation works...) --------------------------------------- etc. Notice the lack of any line breaks. I know this is an active irritation, especially for Staff (who must deal with more PMs than any individual I'bles member).  I'm curious as to whether the underlying cause is even known, and whether there's any estimate on when a fix might be rolled out.

Posted by kelseymh 8 years ago


Offline Instructable maker?

Is there any sort of program download on this site that can be used to make Instructables offline? I have a few instructables that I would like to make, but my internet connection is nowhere near good enough to make one.

Posted by scob89 9 years ago


in house/property phone to phone direct line

Anyone know of the easiest way to make a permanent phone to phone direct line. As in a phone from the back shed to the house. I want to be able to pick up the phone in the house or shed and have it ring on the opposite phone. any idea's?

Posted by chaoscampbell 10 years ago


How accurate can a line following robot be? (Laser cutter idea inside)

I have no idea how accurate line following robots can be (and this is what I'd some clarification for), but could a cutting laser be mounted to one? The robot would just follow a black line that you've printed out, and in the process would have also cut out the pattern. If that would work, this would allow you to cut out shapes from a huge canvas size, as well as making quick stencils with a fine line Sharpie.

Posted by olliewagner 10 years ago


Sharing a home telephone line through the internet?

Hi geeks :) I have this thing in my mind that I want to put into practice. I don't know where to start. I searched couple of things in google but didn't get any answers to help me to start my project. I was thinking to use my uncle's second home telephone line which is not in use at the moment. The thing is that I live 10km away from his house and he has this thing that he is able to talk limitless to foreign countries :) So I'm wondering: is there anyway to connect or to reach my uncle's second line through internet? I thought maybe I can use the second telephone line by setting up the right equipment like creating two servers one at my uncle's house and one at my house. Any ideas are appreciated! 

Posted by x-poke 7 years ago


Building a 5V or 12V powered in-line preamplifier

I want to build an in-line pre-amplifier with a 3.5mm in and out jack.  What I want, or at least think I want, is a simple booster that provides a small, but relatively even gain boost from an MP3 player into the main amplifier. Something along the lines of this: https://www.instructables.com/id/In-line-headphone-amplifier/ However, I would like to be able to power it off of 5V USB or off of the 12V coming into the cigar lighter. What I'm effectively trying to do is get enough gain on low volume spoken-word audio coming out of my mp3 player so that I don't have to crank the stereo up to max.  Does anyone have any good sources for instructions or advice for this sort of thing? Alternatively, someone can tell me if this is a fools errand to begin with, and that I aught to be taking a different approach altogether.

Posted by wildgunman 7 years ago


Powerline communication

Hello I'm intrested in plc (powerline communiction) but I can't find specific schematics and / or "to the point" information. If someone can help me with information ect... or anything use full??  Thnx

Posted by geo bruce 6 years ago


Audio

I've got a 2 channel color organ with an electret mic for input. I'd like to be able to remove the mic and run it directly from one side of a stereo output from a cd player. I know I need to have something there to replace the mic, but I'm an audioidiot. Thanks. BTW, this is for a puking skeleton for Halloween. The color organ will drive the pump, while the audio will be, well, the audio.

Posted by oobadooba 10 years ago


Hey all, in case I dissappear until Tues evening.....

It will because I am having difficulties with my computer. It will not boot to SAFE MODE, and is acting very flakey when I boot to normal mode. I appears as though my "restore points" have all been wiped too, but I can't be sure as I can not access that either. Tues. evening, I will be back to work, so if there is anything to update on this situation, I will be able to post it then.

Posted by Goodhart 9 years ago


Zip Line Claw Help

I am attempting to make a claw/clamp like device that could hold an object and then ride along a zip line. I have most of the details figured out but I am stuck on what I could use for the claw. It would have to be able to hold about 10 lbs and then have a pin release. I would prefer off an off the shelf item but could do minor modifications. Any ideas? Thanks

Posted by madigajm 5 years ago


Annotation/Note boxes never line up where they are supposed to.

Annotation box may not be the right word, because I've never done an Instructable, but I am talking about the "Note" boxes that you hover over to see the author's note on his project images. They rarely line up with what they are supposed to, no matter what Instructable I view. So I don't think it's the author's fault (Sometimes they are even way out of whack, like on the wrong side of an image), I think it's a bug.For example, scroll down to the image of the pear painted on the glass on this page, and notice where the note is. Several of his images are that way, some are worse off than others:https://www.instructables.com/id/Layered_glass_art/?InstructImages

Posted by MCWHAMMER 9 years ago


adding aux line in directly to boombox ampli

Hi guys i am Ramanta from Indonesia i have an old boombox, Sony CFS-1110s (similar mechanism with CFS-1100s) what i want to do is add an aux input to them. I have seen a lot of instrucrables about it, but nothing about this model. I find a similar unit here https://cocodrilabs.wordpress.com/2012/04/05/installing-an-auxiliary-input-on-a-stereo/ the aux in is conected directly to the IC Amps pin. I have the IC diagram, what i dont understand is this model have a dual IC8207k. One for each channel. TA8207K is a stereo IC, so how do i do the wiring? For single IC its just INPUT1-INPUT2-GND. In dual setting they have 4 input and 2 ground. I dont want to use any tape adapter since its sound terrible here i attach the complete diagram and schematic in PDF please give some tutorial, im a beginner in this kind of thing) hehe my email zramanta@gmail.com sorry for the bad english :D

Posted by ramanta 3 years ago


Problem with first page of Instructable

Hi, The first page of my Instructable seems to have been corrupted and has lost all its Carriage Returns https://www.instructables.com/id/RC-truck-robot-conversion/ Anyone have any ideas how this has happened? Don't fancy having to keep coming back to edit it again and again. Thanks

Posted by OracsRevenge 9 years ago


coMBINING ARDUINO SKETCHES

Every thing is okay except line follow command ,,,when i say line follow it only goes forward but does not follow line my code is String voice; int LS=10; int RS=9; int LED=13; char getstr; int in1=3; int in2=4; int in3=5; int in4=6; int ENA=2; int ENB=7; long duration, distance; int trigPin=A0; int echoPin=A1; int buzzer=8; void forward() {   digitalWrite(ENA,HIGH);   digitalWrite(ENB,HIGH);   digitalWrite(in1,HIGH);   digitalWrite(in2,LOW);   digitalWrite(in3,LOW);   digitalWrite(in4,HIGH);   } void back() {   digitalWrite(ENA,HIGH);   digitalWrite(ENB,HIGH);   digitalWrite(in1,LOW);   digitalWrite(in2,HIGH);   digitalWrite(in3,HIGH);   digitalWrite(in4,LOW);   } void left() {   digitalWrite(ENA,HIGH);   digitalWrite(ENB,HIGH);   digitalWrite(in1,LOW);   digitalWrite(in2,HIGH);   digitalWrite(in3,LOW);   digitalWrite(in4,HIGH);   } void right() {   digitalWrite(ENA,HIGH);   digitalWrite(ENB,HIGH);   digitalWrite(in1,HIGH);   digitalWrite(in2,LOW);   digitalWrite(in3,HIGH);   digitalWrite(in4,LOW);   } void stop() {   digitalWrite(ENA,LOW);   digitalWrite(ENB,LOW);   } void on() {   digitalWrite(LED,HIGH); } void off() {   digitalWrite(LED,LOW); } void line(){ if(digitalRead(LS) && digitalRead(RS))     // Stop   { stop();   }     if(!(digitalRead(LS)) && digitalRead(RS))     // right   { right();   }     if(digitalRead(LS) && !(digitalRead(RS)))     // Turn left   { left();   }     if(!(digitalRead(LS)) && !(digitalRead(RS)))     // Forward   {     forward();   } } void setup() {   pinMode(LED, OUTPUT);   Serial.begin(9600); pinMode(LS, INPUT);   pinMode(RS, INPUT);   pinMode(in1,OUTPUT);   pinMode(in2,OUTPUT); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT);   pinMode(in3,OUTPUT);   pinMode(in4,OUTPUT);   pinMode(ENA,OUTPUT);   pinMode(ENB,OUTPUT); pinMode(buzzer, OUTPUT); } void loop() {   while (Serial.available()){ //Check if there is an available byte to read      delay(10); //Delay added to make thing stable     char c = Serial.read(); //Conduct a serial read     if (c == '#') {break;} //Exit the loop when the # is detected after the word     voice += c; //Shorthand for voice = voice + c   }   if (voice.length() > 0){     if(voice == "*go ahead"){       forward();       }     else if(voice == "*go back"){       back();       }     else if(voice == "*turn right") {       right();     }     else if(voice == "*turn left") {       left();     }     else if(voice == "*light on") {       on();     }     else if(voice == "*light off") {       off();     }         else if(voice == "*stop") {       stop();     } else if(voice == "*line follow") { line();           }       voice=""; //Reset the variable after initiating   } }

Posted by BibekP4 11 months ago


Need a Strategy to Count/Sort Plastic Tips

I need a way to take bags of plastic tips below and sort them into groups of 100 quickly for packaging. The tips are 6 inches long and about 1 inch in diameter. Any suggestions?

Posted by Adamgadbois 5 years ago


Instructables seems to be more popular!

Wow first instructables has sprint ads and now toyota ads. I think instructables is really getting more popular i see more and more new members join. Wow i think instructables.Growing do you think instructables is growing?

Posted by Easy Button 11 years ago


i want to start and stop my line follower robot robot by blutooth

Please help me , i have no idea how to change it. i have line follower robot , and i want to operate my robot by blutooth , i want start and stop my line follower robot by blutooh ,my line follower robot code is //code is int rightmotor1=12; int leftmotor1=13; int rightmotor2=9; int leftmotor2=8; int sensorleft=5; int sensorcenter=6; int sensorright=7; int l1=1; int l2=1; int l3=1; int f1=0; int f2=0; int f3=0; ////////////////////////////////////// void setup() { pinMode(rightmotor1,OUTPUT); pinMode(leftmotor1,OUTPUT); pinMode(rightmotor2,OUTPUT); pinMode(leftmotor2,OUTPUT); pinMode(sensorleft,INPUT); pinMode(sensorcenter,INPUT); pinMode(sensorright,INPUT); } /////////////////////////////////////////////////// void loop() { l1=digitalRead(sensorleft); l2=digitalRead(sensorcenter); l3=digitalRead(sensorright); ///////////////////////////////////////////////////////////////////// if(l1==1&&l2;==1&&l3;==1)   //feedback when comes all sensor on white { l1=f1; l2=f2; l3=f3; } //////////////////////////////////////////////////////////////////////////// if(l1==0&&l2;==1&&l3;==1||l1==0&&l2;==0&&l3;==1)   //left turn {   digitalWrite(rightmotor1,1);   digitalWrite(rightmotor2,0);   digitalWrite(leftmotor1,0);   digitalWrite(leftmotor2,0); } else if(l1==1&&l2;==1&&l3;==0||l1==1&&l2;==0&&l3;==0)  //right turn {   digitalWrite(rightmotor1,0);   digitalWrite(rightmotor2,0);   digitalWrite(leftmotor1,1);   digitalWrite(leftmotor2,0); } else if(l1==1&&l2;==0&&l3;==1)  //go forward straight {   digitalWrite(rightmotor1,1);   digitalWrite(rightmotor2,0);   digitalWrite(leftmotor1,1);   digitalWrite(leftmotor2,0); } else if(l1==0&&l2;==0&&l3;==0) //stop {   digitalWrite(rightmotor1,0);   digitalWrite(rightmotor2,0);   digitalWrite(leftmotor1,0);   digitalWrite(leftmotor2,0);   delay(2000);    digitalWrite(rightmotor1,1);   digitalWrite(rightmotor2,0);   digitalWrite(leftmotor1,1);   digitalWrite(leftmotor2,0);   } /////////////////////////////////////////////////////////////////// f1=l1; f2=l2; f3=l3;        //memory variables //////////////////////////////////////////////////////////////////// } , i want to keep all code in function and want to call in blutoooh code i want my robot start and stop by blutooth please help me my blutooth code is #include SoftwareSerial mySerial(10, 11); // RX, TX String state;// string to store incoming message from bluetooth int  LED = 5; // LED on pin 13 void setup() { mySerial.begin(9600); Serial.begin(9600); // serial communication to check the data on serial monitor    pinMode(LED, OUTPUT); mySerial.println("Welcome to the wonderful world of bluetooth communication");   delay(1000);   mySerial.println("Sending a '1' will turn on the LED, Sending a '0' will turn off the LED");   delay(1000);   mySerial.println("a '3' will flash the LED and a '4' will kick out a lot of data from the LDR"); } //-----------------------------------------------------------------------//  void loop() {   while (mySerial.available()){  //Check if there is an available byte to read   delay(10); //Delay added to make thing stable   char c = mySerial.read(); //Conduct a serial read   state += c; //build the string- either "On" or "off"   }    if (state.length() > 0) {     Serial.println(state);   if(state == "turn on")   {     digitalWrite(5, HIGH);           }     else if(state == "turn off")   {     digitalWrite(5, LOW);      }      else if(state == "turn1 on")   {     digitalWrite(5, HIGH);           }     else if(state == "turn2 off")   {     digitalWrite(5, LOW);      }     state ="";}} //Reset the variable i am using arduino atmega2560 and blutooth hc 06 and using  l298n 3 sensor

Posted by ShaidK 2 years ago


Need advice for adding aux-in/line-in to Philips AE2160/00-A AM/MW/LW portable radio

Hey there, this is my first post! :) I'm from Germany, so please excuse my grammar! :D The reason why I'm opening up this new topic is, I didn't find any instructable or guide on how to add an aux-in/line-in to my simple mono AM/MW/LW radio Philips AE2160/00-A. There's not much to find out about the technical specifications besides the standard product information: Tuner • Analogue tuning • Wave ranges FM 87.5 - 108 MHz MW 525 - 1606.5 kHz /04 LW 150 -255 kHz /00c FM/MW /04 FM/MW/LW /05 FM/MW/LW • Ferroceptor for MW (and LW) • Telescopic aerial for FM (and SW) Amplifier • Max. output power 300 mW RMS • Tone control Music /News Sound system • Loud speaker 100 mm • Metal grill Power supply • External supply /00c, /04 230V /05 240V AC • Batteries 2 x 1.5V , type R20/D cell/UM1 Connections • Headphone socket 3.5mm General • Material Polystyrene, metal grill • Weight (g) 520 • Dimensions (mm) 210 W x 150H Here's a link to a photo of the device: http://images.philips.com/is/image/PhilipsConsumer/AE2160_00-_FP-global-001?wid=2000&hei;=2000&$jpglarge$ I didn't even find schematics/circuit diagrams for this or a similar device. There are lots of tutorials on how to add such an input to a car radio or a boombox/stereo cassette player a.s.o., but not for a simple AM/MW/LW radio. My questions are: 1.) Are there any similar hack projects here in the step-by-step or forum section? 2.) How do I find the right connector or place to solder a 2-way-switch between the sections (tuner, amp, speaker)? After the hacking job, it should be possible to switch between normal radio listening mode and aux-in/line-in mode from an external mp3 player, notebook, a.s.o.. 3.) Is there anything else to know for this project? Yesterday I've opened up the case for the first time and looked over the circuit board and the connections. I had no cam to take pictures, but I try to take some mobile phone cam pictures of the circuitry and parts at the next opportunity! Cheers, arok1

Posted by arok1 6 years ago


Ceiling-hung, Retractible Clothes line or rack for use with clothes hanges

I think this would be very popular in smaller rooms (or one in which you don't want a sagging clothesline running through your field of vision). I would like to hang a sturdy, pipe-like structure (so no sagging under light to medium weight) that I could pull down on a retractible cord/pipe/other to hang coat hangers of washed tee shirts to dry and then retract back up out of the way while drying or not in use. When I was a kid in the 60s we had a ceiling lamp above a table that worked like this; when you were working on something you could just pull it down (click click click) to however close to the table you wanted, then back up out of the way when you were done. This idea would be hung from 2 spots on the ceiling with some kind of mechanism that would allow for pull-down access and then push up storage; some type of pipe suitable for holding clothes hangers would be strung up at both ends and mounted to the ceiling. The "pipe" would then hang level when use at an accessible height, and the "push up" to hang level, closer to the ceiling. Ideally this would be not too heavy as I have smashed my dominant-hand wrist and have limited strength as a result. Help me Mr. Robots! Help!

Posted by 008cats. 2 years ago


Is there a way to make single line spacing in the new editor?

Is there a way to make single line spacing in the new editor?  Whenever I press return it looks like I'm getting double line spacing. Is there any way to stop the new editor from doing this? I don't want things formatted that way. ---------------------------------------------------------------------------------------------- This is single line spacing. This is single line spacing. This is single line spacing. This is single line spacing. This is single line spacing. This is double line spacing. This is double line spacing. This is double line spacing. This is double line spacing.

Posted by Todd Gehris 4 years ago


lines on laptopscreen

Hi all I ahve a laptop that has developed 'lines' doewn the screen, they seem to be pressure lines as when presseing the chsassis they go away. Any idea how to repair ?

Posted by magic105 10 years ago


Line-break Text Editor Bug

I guess there's a bug in the new text editor. Whenever I save/ publish a guide. All the line breaks are not rendered exactly as I input it. It's missing the "" line break. This happens when I do a double line break for leaving a single line blank. For now, I use the source code window to manually add the extra "". Best, Angelo

Posted by ASCAS 4 years ago


Winrar Command line

I need help understanding and using winrar command line. specifically the lock, copy, password, delete after rar, and the ieml command and anything else you would like to share with me. Thanks for any and all help!!!

Posted by spiker 10 years ago


Best Pick Up Lines

Hi, Please share your funny/corny pick up lines on this forum. Thanks Joe 1.If I could rearrange the alphabet, I would put U and I together. That one was lame but i want to here yours.

Posted by joejoerowley 10 years ago


Video signal from pc

I need to know which is the video line on the monitor cable coming from a computer.If there is an audio line coming from pc to monitor that aswell but mostly interested in video line

Posted by Leon Jacobs 10 years ago


top line on page covers the log-in button

the top line on your web pages doesn't look right. A contest button covers up the log-in button so it is very difficult to log-in.

Posted by dad45 7 years ago


Old Hi-fi with no line-in

Hello everybody,  I found an old (5/10 years)  Kenwood small hi-fi system. It has a good sound, but I wanted it to connect to my laptop. The problem is that there is no line-in or any other form of input. Since it has cd-reader and a tape reader I though I could create an input removing the tape reader and using the connection tape->amplifier as my new line-in. Is that possible, any help or instruction? Thanks, bye

Posted by groobox 7 years ago


Laser cutter software issue

I use a laser cutter that runs on LaserCut 5.3 To create my files, I draw in Inkscape, save as a DXF file, then import that into Lasercut5.3 Unfortunately, importing into LaserCut5.3 creates artifacts in my files - polygons are created where none were before, and lines are invisibly doubled up, meaning that the laser cuts some lines twice, which wastes time, energy, and can spoil a project if a line goes too deep. Two typical examples are below. In an ideal world, the "e" would come out as two continuous lines (inside & outside).  Intead, it comes out as three lines, and the straight parts of the lines are "doubled over" - it cuts twice. Where two or more straight lines are contiguous, like the "k", the sections gain extra lines that break it up into smaller polygons. (I have shown the extra lines in red). Both cases are fixable, on a file-by-file basis, but, in the clunky LaserCut5.3, the fix can take longer than the original design. Has anybody else experienced this issue, and how did you fix it?

Posted by Kiteman 3 years ago


Levi Strauss & Co. Asks: What's the Future of Line Drying?

Levi Strauss & Co, the jeans manufacturer, is holding a contest to build a better line drying solution.  Sounds like something right up the Instructablizers' alley. Press Release Official Site

Posted by yoyology 8 years ago


Powering infrared Line Laser using USB port

Hi,  I have a line laser which has following specs!!! http://www.aliexpress.com/store/product/780nm-60mw-5V-IR-Infrared-Laser-Line-Module-120-degree/640033_1594226134.html 5V DC or 3.3V preferred!! Working current must be < 200mA How can power this laser using USB cable or USB port I know USB has 5V DC (max current is 500mA) I want to know how to convert it so that  i can power the laser??!!! Thansk in advance for help!!

Posted by victorx10 4 years ago


Published instructable blank line spacing does not match the editor

First image shows the missing blank lines in the published instructable. The second image shows what I actually entered in the editor. I'm on Windows 10, using Chrome Version 46.0.2490.80 m The project with this issue is here: https://www.instructables.com/id/Halloween-Fake-Fire/ I think the reason for the bug is because I want to put a spacing between bullets without creating bullet on the blank line I pressed SHIFT-RETURN instead of RETURN.  Somehow it SOMETIMES mess up because as you can see other lines above and below it works fine. Feel free to contact me if I could assist in debugging / testing.  Thanks!

Posted by HariFun 2 years ago


line distance in the new editor

Hey! i'm not a big fan of the (now compulsory) new editor (yet), but since it is an inherent qualitiy of humanity to be sceptical towards all things changing don't mind that. BUT: i have a really big problem with the line spacing (i hope i'm using the proper terms for all this formatting related things...) Here, it still works fine: if i want to create a newline, that is if i want to create for exampple a list of things that contains only one word per line the line spacing between those words is still just the same than when i just type in an endless row of words and if i reach the end of the line it starts automatically in in new one. if i use the new editor though, if i do the list thing, (if i push "enter" after i typed in something) all of a sudden the line spacing is about 1,5 times as big as in normal text and i can't change that. this really bugs me, as it doesn't look very good, but it also makes a text very unclear an confusing and if you have to write a long list of things, for example when explaining what things you need for an instructable, the text will appear very long and things that before fitted nicely on a computer screen have now to be scrolled down. furthermore, it is not really possible anymore to distinguish between a new paragraph (that starts when leaving an empty line between the text), or if you leave an empty line, you have a really huge gap between text parts that just looks weird and bad. so please, is there a way to fix this? is there a button to push to prevent the increase in line spacing when i push "enter"? that would be really awesome!

Posted by sursula 4 years ago


i need line follow code .it work for 5 sensor

I am mechlogy . i need code for arduino i am using 5 sensor code . please provide me workable code.i need code for ln987n and 5 sensor strip

Posted by ShaidK 2 years ago


Trouble using In Line Signal Amplifier

I am trying to install an in line signal amplifier for my satellite, which I hope will increase the signal strength. However, when I finish installing the amplifier the signal is totally blocked. Dose anyone have any ideas on what I am doing wrong?

Posted by Sedgewick17 9 years ago


Quick connect gas natural gas line

I need someone to show me how to make a gas line with a quick connect to the natural gas extension on my deck (comes out from under the crawlspace) to my BBQ. A ready made one is muy expensive!  Thanks!

Posted by geppetto425 7 years ago


veritcal lines on a vizio tv m55osl

What can i do to fix the vertical lines on my vizio tv m55osl they are always visible they don't move or anything the only thing about it is when you are in front of the tv there not so bad but if you move to either side the lines get more apparent is there in easy fix or witch bored do i need to replace?also to watch cable tv i have to use a/v inputs because the cable input dosent work

Posted by JasonD16 3 years ago


Pre-Formatted Text Issues

Hello; Several of our instructables have pre-formatted text in them. However recently this text has stopped displayed properly. It has gone from being multiple lines to a single long line. Is this a fixable issue? Examples: https://www.instructables.com/id/S99CDK8FWS6JUQS/ https://www.instructables.com/id/SAXXIILFSH7EDVM/ The Long line after "The Code"

Posted by oomlout 8 years ago


Line follower robot with 100 kg payload

Hello, I like to build a robot that follow a line and can support 100 kg payload,i was wondering where to start to build the chassis. I can weld and have some but  limited access to machining tool. But I was wondering if there is not some stuff i could hack to create it faster. Vincent

Posted by VincentD48 1 year ago


Please use better SUBJECT lines

It would be REALLY NICE if when people posted a question in the forums, they put some useful information in the subject line so that people who might answer the question would have a quick clue as to whether they can help. Here are some particularly bad recent examples:Please tell me if this will workI need some help on a project.I need some helpQuestion?And to be fair, here are some subject lines that were OK to excellent (I was only interested in half, but at least I could tell from the other subject lines that I wasn't interested!):Help programming a 8 pin eepromAirsoftJoule Thief Troublesyour favorite song?

Posted by westfw 10 years ago


"HC Off-Line Occured" while Interface Sysmex Xp100 machine using serial cable

We are Interface Sysmex XP100 Hematology machine, but we got "HC Off-Line Occured" error. We are using Serial Port 9-pin female pins (2-->3, 3-->2, 5-->5) Our Code To Open Serial Port: SerialPort comport = new SerialPort(); comport.BaudRate = int.Parse(cmbBaudRate.Text); comport.DataBits = int.Parse(cmbDataBits.Text); comport.StopBits = (StopBits)Enum.Parse(typeof(StopBits), cmbStopBits.Text); comport.Parity = (Parity)Enum.Parse(typeof(Parity), cmbParity.Text); comport.PortName = cmbPortName.Text; comport.Open(); Port successfully open, but when XP100 machine send output, it shows "HC Off-Line Occured" error. Please provide possible solution.

Posted by vishal2 1 year ago


enter key

Why is the enter key not working? I'm trying to write an ible but the enter key wont work to skip lines between paragraphs. Is there a work around besides writing in a different program and using copy and paste?

Posted by ecsaul23 5 years ago