how do i make a craft of my own on instructables?

I want to make a craft that i can do that everybody can do too.

Question by cherry5947 9 years ago  |  last reply 9 years ago


Is it hard for you to get answers to hardware problems and connect with connect other makers? We have an upcoming solution

MakrConnect is a networking platform for makers to problem-solve, share ideas, and collaborate. We are currently incubated at MIT Launch. Post your questions on our platform and other makers will provide you with solutions. Furthermore, MakrConnect will build social aspects upon our forum infrastructure. We will allow you to share your projects, build your profile, and even find makers near you to work on projects together in person. We believe that with MakrConnect, making will be easier than ever. Please take a few seconds to sign up on our mailing list at markrconnect.com. Stay Awesome!

Topic by jliang5 3 years ago  |  last reply 3 years ago


making crankbaits

I'm trying to make some crank baits for my uncles birthday and mine are not turning out well i'm going to start from scratch i need them done by christmas that is my uncles birthday and i need to make a few dozen thanks

Topic by smithtopia 10 years ago


Making Shoes

I wanna make my own shoes, but I'm not an artist at all but I know how I want my shoes to look and feel. If anyone can help me that would be great!!

Topic by wannabshoemaker 11 years ago  |  last reply 10 years ago


Making a group

Don't worry Kiteman, I know how to make oneI have a question, I am currently making a group, and I want it to be moderated, but I don't want an email alert every time someone tries to join. If I have email alerts off, will I get one, or a PM?

Topic by Rock Soldier 9 years ago  |  last reply 9 years ago


Avatar Making

Hey guys, if you want a cool new avatar just let me know. I made this one for mad mick after he wanted to get one from oblivitus ~~Mad Mick~~ ~~DJ Radio~~ ~~Darth Gecko Man~~ ~~Jollex~~ Oompa Loompa

Topic by ajleece 10 years ago  |  last reply 9 years ago


how to make a keyboard

Hi guys i have an Idea about making a keyboard but i didnt make it yet who have an idea please put it here it may be easier iam working on arduino language thx

Topic by buraqo 4 years ago  |  last reply 4 years ago


making helicopter as a project

 hello friends, any one can help me out to make a small helicopter  send me some usefull like s and send me some designs 

Topic by funnycool2000 9 years ago  |  last reply 9 years ago


how to make cream cheese?

Question by Dfenik 10 years ago  |  last reply 10 years ago


how to make ear wires?

Question by vazelle 6 years ago  |  last reply 6 years ago


making your own crankbaits

Hey I've been trying to make my own crankbaits for my uncles birthday but mine have not been working and I need to start from scratch and also if you know how to make wobblers that is fine to I don't need to hurry but I would like to make a few dozen by Christmas that is his birthday so thanks

Topic by smithtopia 10 years ago


help making candy eyeglasses

Has anyone ever  made candy eyeglasses? I could do with so help and advice to how to do this. I have no clue of where to begin

Topic by online102782 7 years ago  |  last reply 7 years ago


What type of apples would be best for making cider?

Question by ardnaz 9 years ago  |  last reply 9 years ago


What process would be best to make this mold???

New here so sorry if its in the wrong spot but I need to recreate the molding in this picture. Now it doesnt have a ton of detail so it should be fairly easy to make but I have no idea what to do. Can I vacuum form it and then use that piece to pour a mold. Can someone post some good links on what to do? Thanks John [IMG]http://i10.photobucket.com/albums/a117/jleews6/images.jpg[/IMG]

Topic by 85 GT Kid 6 years ago  |  last reply 6 years ago


does any1 know any go movie making programs?

Any way of making short vids with analog audio???? any links????

Question by andybuda 8 years ago  |  last reply 8 years ago


When making wine what does the phase prime it mean?

I new to wine making and dont know all the words yet

Question by michaeltruman83 10 years ago  |  last reply 9 years ago


How Does A 10 Year Old Make Money Fast?

Question by superselena123 6 years ago  |  last reply 5 years ago


PCB making? Answered

Hello, Can I use H3BO3(boric acid) and HCl for etching?

Question by Zhuna87 2 years ago  |  last reply 2 years ago




Making a smartwatch

I want to build a touchscreen smartwatch which can use fitness apps and possibly pair with an iPhone 4s I need parts and a sort of howto guide to help. Many thanks for anything Andrew :)

Topic by Nattress 4 years ago  |  last reply 4 years ago


i want to make my own transformer toy out of plastic perhaps using mold or something?

Transformer toy from plastic i'd like a guide or something as to what i should do most action figures you got dont move

Question by 9 years ago  |  last reply 5 years ago



Knife making

I had made a few knives in my day, and one sword (long long ago, and no, I don't still have it). One of the places that has been around for awhile that has a good selection of supplies AND kits (for the beginner up to the master smith) is the Texas Knife Maker's Supply store Another place that looks good, although I have never dealt with them is the MidWest Knife Makers supply I also came across a place to get a Sheffield's Supply Catalog on line. And then there is always the Jantz Supply site. I hope these prove to be useful to you.  

Topic by Goodhart 9 years ago  |  last reply 3 years ago


bubblewrap

Does anybody know how they make bubblewrap???

Topic by raddude62896 9 years ago  |  last reply 9 years ago




FIRE

Like I'm bored and I want to blow some stuff up any 1 have any ideas of what I should do?

Topic by jotary 11 years ago  |  last reply 8 years ago


How do i add a text square?

In a instructable people put a little square and when you roll over it it shows text

Question by creat0r 8 years ago  |  last reply 8 years ago


how can a teenager start a business or store? Answered

All i need to know is how to get it started but i will accept any other information

Question by L MAN 8 years ago  |  last reply 8 years ago



Metal Work

Does anyone out there have any knowledge on Cadam programming? I have a mini lathe and milling head and thinking about putting a Cad system on them. Would it be cheaper to just buy one already set up? Also looking for model plans to build and construct.

Topic by Roy Space 7 years ago  |  last reply 7 years ago


reliable way to set and maintain the angle between my belt sander and the piece i'm working on

Effectively i need a angleable and lockable table with an adjustable stop to help me maintain the angle between the face of my belt sander and the peice (knife) i'm working on can anyone help?

Question by madenairy 7 years ago  |  last reply 7 years ago


im 12 and i taing my girlfriend to the movies tommorow and we plan to makeout then but im not sure what to do?

I eed to know what to do me and her have no idea how to makout and we want to tommorow but we dont know what to do. im taking her tommorow i need instant feedback please

Question by 9 years ago  |  last reply 4 years ago


What will the abv be?

Hi all I'm new to brewing made some cider today the specific gravity was 6 what will the end result be used normal yeast this time made some a couple of weeks ago and forgot to measure sg it's now at 3 am I reading my hydrometer right anyone know how ill get the true abv of this batch thanks jolly

Question by Jollyr6 5 years ago


2 blank steps can't be deleted,why????

Ok so i started my first instructable and everything is fine up until the point where i add another step and then I can't delete it so, i decided to add another one and then delete but now I ended up with 2blank steps!!!? wtf face!!!! '.' P.S sorry about the category I just had to pick one !:P

Question by Viliana N. 7 years ago  |  last reply 7 years ago


How do I transfer my tapes from my video camera to DVD on my Mac? Answered

I have the right cable, I have imovie. When it says to import from camera do I have the tape running at the same time I select that option? Do I need to do more? Is this easy? Is it easy to import to YouTube once it is a DVD or do I do this right from imovie? Sorry if these are dumb questions, I feel like my brain is running on glue today, I just can't think.

Question by Ninzerbean 9 years ago  |  last reply 9 years ago


Make a Living?

Is anyone making a living with walking sticks? If so, what is the average and how long does it take to make it?

Question by Njboss 7 years ago  |  last reply 7 years ago


make a ebook

Hii! I`m trying to make a ebook and wonder how to make it. is there any programs/software i need to have?

Topic by dagelias 7 years ago  |  last reply 7 years ago


making methanol

Hi im looking to make some methanol i have heard you cna do this by mixing cabon monoxide and hydrogen but i have no idea how anyone got any ideas for making these and therefore being able to make methanol or other ways of making methanol cheers josh

Topic by minus273degrees 11 years ago  |  last reply 6 months ago


money making?

Is there any way to make money besides getting a job, i need some extra money to make these things i see in instructables. any ideas?

Question by zen lyne 10 years ago  |  last reply 5 years ago


Making a coil >.<

Grrrr, so I'm making my https://www.instructables.com/id/Coilgun-Handgun/ and I have everything done, but I can't make the coil, i try winding but it turns out pretty messed up, and hard to take off, is there any other way to make the coil?

Topic by astrozombies138 11 years ago  |  last reply 11 years ago


Making a mold.

I am trying to make a fascia panel for a car. In order to do that I need to make a cast of one of the voids in a panel, from a vehicle console, since it can't be measured easily. I want to make the cast so that I can then make an accurate template from which I can make the panel I need. I am looking for a material that is non-destructive to the plastic panel that contains the void. That will create a rigid solid replica of the void. I know nothing about making molds and casts. Thanks in advance.

Topic by ucs308 3 years ago


Mold Making?

So, after making this awesome isntructable (it's curing now!), I got ideas for other concrete projects. My favorite so far is making a concrete lamp. I want to make a mold of a lamp (light bulb in it) and then cast it in concrete. I'd then put a real lampshade on it and call it art. My problem is...I have no mold making experience. Do you guys have any tips, know where to get silicone, etc?Thanks!

Topic by Weissensteinburg 10 years ago  |  last reply 10 years ago


making a drill?

I need some sort of drill, but i have to make it. it can be powered by anything, air, electricity,etc. just, not hand crank. it doesn't have to be very heavy-duty, i only drill soft plastic mostly. thanks! -toogers

Question by toogers 9 years ago  |  last reply 4 years ago


make a transformer? Answered

I am wondering how to make a homemade transformer for an early tesla coil (the kind with the flat primary and secondary coils). Thanks in advance, Josh1324

Question by josh1324 7 years ago  |  last reply 7 years ago


Make a spring

Dear all. I would like to make a spring 8mm diameter 100 mm long with 18 gauge galvanized wire (needless perfect) . Please could you help me to know : It's must make   heat treatment  before or after on the finished spring .Thank you so much

Topic by lam 2 years ago  |  last reply 2 years ago


Making a Forge

I want to make the inlaid thingies as noted by another instructabler (lol). I need a forge that will melt the metals in this instructable:https://www.instructables.com/id/EAS38HWF4AQNWN4/?ALLSTEPSWhat can I put together on the cheap to produce these results?

Topic by Murdok 11 years ago  |  last reply 11 years ago


Help making this..

I want to make a sort of ball, to put my camera inside. The point would be to be able throw it, to get an "action" sort of look. I was thinking of making a ball or using some sort of plastic ball. The camera would be held in place by a screw. The inside of the ball would be filled with something to cushion the impact. Any ideas, suggestions or items already available?

Topic by Keith-Kid 10 years ago  |  last reply 10 years ago


Make-A-Flake!

Found this during an online hunt for tiny capacitors...Interesting.The idea is to use the scissors to cut out pieces of the folded paper, and make a snowflake.Start on one edge, and use the mouse to click and cut out.LINK

Topic by bumpus 10 years ago  |  last reply 10 years ago