Mini Cannon!

Yay! The mini cannon is back! Youtube user 43287633 (T. Shamir) has returned with more footage of destroying things around the house with a tiny cannon.

Posted by fungus amungus 8 years ago  |  last reply 6 years ago


Mini Amp

I have a old pair of headphones and i was wondering is there any way i could power the speakers from the head phones and plug it into my guitar to use as a mini amp ?

Posted by jonathanbud 10 years ago  |  last reply 10 years ago


Mini Cannon

This video by YouTube user 43287633 shows off the abilities of a tiny custom cannon. Check it out to see this thing take on soda cans, glasses, balloons, and more. Unfortunately, there's no other information about this one, but I do love the fact that the firing range is the creator's own desk. That's some serious confidence in the reliability of the cannon. via Neatorama

Posted by fungus amungus 8 years ago


Mini-generator? Answered

I was sitting here today wondering how could an electric car with a gas generator possibly be useful, then it hit me.  I could add a gas powered generator to an RC car to give it the ability to fill up and run again without the need to charge a battery.  The idea was brilliant so I went out looking for a platform to use.  I decided on a traxxas E-Maxx.  It has a lot of space to build on, and it is a pretty awesome truck.  I decided I would leave the batteries in the equation and they would be sustained by the generator.  Now, what on EARTH DO I USE FOR A GENERATOR that doesn't cost as much as the motor itself.

Asked by jj.inc 6 years ago  |  last reply 3 years ago


what is a mini-tower?

What is the main difference between full,mid-tower and mini-tower cases in diagrams and how many slots do they have

Asked by BRUNY102 6 years ago  |  last reply 6 years ago


mini batches of wine

Im gonna start making mini batches of wine to see what kinds im gonna mass produce.......is there a formula for sugar to yeast......im making them in pet bottles or cocacola bottles

Posted by rollingstoner357 10 years ago


Mini Tesla Coil

I would like to know how this http://4hv.org/e107_plugins/forum/forum_viewtopic.php?36853.post can be made? I tried to make it using the pdf that was attached but i failed. I have included pics of my failure http://4hv.org/e107_plugins/forum/forum_viewtopic.php?99090 Can somebody please help me?

Posted by deathnoteviewer 8 years ago  |  last reply 8 years ago


Reusing mini blind slats?

I'm getting rid of about a dozen mini blinds. They are not good enough to give to the Salvation Army, but there are lots of undamaged slats. Anyone know ways to reuse these? Thanks.

Asked by archerj 7 years ago  |  last reply 7 years ago


The First Mini Knex Gun

This is the first mini knex gun that I know of on this site I am not going to post though.

Posted by Knex_Gun_Builder 10 years ago  |  last reply 9 years ago


Mini Desktop- Carputer Project?

I have a HP Mini Desktop computer for sale, it is the small one(Dark Green) in the picture, It is a HP e-Vectra(E-PC) computer, Model C10. Specs are 20GB hard drive, 256MB of RAM, 1Ghz P3 CPU(Upgraded from a 733). High speed internet ready. Windows XP Pro SP2, Office 2003 Pro edition(All legal). The computer itself is very very quiet, the only thing you can really hear is the hard drive spinning. It uses a laptop power supply which is included. $100 or best offer.http://farm4.static.flickr.com/3571/3320276915_c494fb94c3.jpg?v=0http://farm4.static.flickr.com/3545/3321103068_4775069e31.jpg?v=0I bought this Mini computer to install in a car as a Carputer, but have since traded the car off and don't want to put it in my newer car.The dimensions of it are about 4" wide a foot tall and a foot long.

Posted by scob89 9 years ago  |  last reply 6 years ago


Mini fuse box question?

My headlights have stopped working - main beam is OK, sidelights are OK, normal dipped beam is out. Since both sides went at once, I'm assuming its a fuse. However, there are 24 fuses in the fuse box, none labelled with what they serve, and the Haynes manual simply gives them numbers. I'm being lazy - to save me going through them one by one, does anybody know which fuse is the one I need to change? (Rover Mini Mayfair, 1275cc, 1995)

Asked by Kiteman 8 years ago  |  last reply 8 years ago


Homemade MINI Particle Accelerator? Answered

Hello!  I'm working on a homemade mini particle accelerator from stuff in like hardware stores and thrift stores. I was wondering if someone could give me a definition of a particle accelerator and their hazzards? Also the only thing that I would need to buy off eBay is a some sort of detector for electrons. Heres a list of supplies: concrete, CRT Monitor, wood, lots of thin copper wire (for the electromagnets), a electron detector, and a power supply. It would be a circular accelerator too. Any ideas or info is welcome! PM me or just comment below!

Asked by joespicnictables 8 years ago  |  last reply 5 years ago


My Ipad Mini is possessed!!!

Send amberlamps!!

Posted by Assassin Tube 5 years ago


Broken Ipod mini help

My friend just gave me hear broken Ipod mini. The screen is cracked and I was wondering how to fix it, any help?

Posted by sweetridecaddy 10 years ago  |  last reply 10 years ago


HELP! vga to mini-vga

I'm trying to get composite out from my PowerMac G3 (B&W;). All it has is vga. Can I take a vga monitor cable (cut the end off) and take my "mini-vga to composite adapter" (from an old iBook which I no longer have) and cut the mini-vga end off and just connect the appropriate wires? I'm not really sure of a few of them.Here are the links to the Wikipedia entries (with pinouts):Mini-VGAVGAThanks for any help!Danny

Posted by just_jeepin 10 years ago


Making a mini branding iron? Answered

I am considering making a mini branding iron (about 3/4" square) out of brass with my initial to brand my work.  I have some brass which I hope to transfer my initial on and then cut with a rotary tool. First I have to transfer the pattern,and thinking of using my ink jet printer and some acetone, and then proceeding to cut away with my rotary tool. Do anyone have any suggestions or tips?   Thanks

Asked by WazIt 5 years ago  |  last reply 5 years ago


mini organ from harmonica

I  had an idea other day concerning harmonica.  Why couldn't one take a harmonica, run air tubing from an air source, one tube to each hole of the harmonica, use some sort of valves that can be triggeered by a keyboard, Voila, mini organ.  I am not interested in doing this myself but I think it could be pretty cool.  For one thing I think it would make a harmonica capable of playing multi note chords.  Some that would be impossible to play by mouth.

Posted by paqrat 7 years ago  |  last reply 5 years ago


super cheap, mini valves?

Is it possible to get a TINY, cheap electric valve?  The idea is for a 3D printer that uses a huge array of tiny needles, each of which acts as an extruder, to 3D print stuff in seconds instead of hours.  My question is, could I use a tiny valve over each needle to allow or stop plastic? or would that be impractical/impossible?

Asked by jduffy54 6 years ago  |  last reply 6 years ago


knex vulcan mini gat

Ok this will be the best thing out of knex,but i need some help.I have an idea for the gear box and twisting pivoting stand,but thats about it i want it to be like a real one with a mag 4-8 barrels that cock themselfs using a rail system so if you have any ideas(especialy knex masters like mepain mykhailo or killerk or any other person)please post soon i think i have an idea for a way to make it have only one mag wat will happen is at the end of the mag there will be a ledge that holds them in place then when the barrel comes around it can grab it with a special tooth attachment and then gravity will pull it down into the barrel(no idea on how to build yet) pic 1 real thing pic 2-3 gear box

Posted by darth acexxacer 10 years ago  |  last reply 10 years ago


DIY mini Heater for vaporizer ? Answered

Hello, I am building a Vaporizer in Steam Punk style! It has now become a rather advanced project... And I want to include a little heater instead of using a Lighter to Evaporate the oils in the Weed. It is really hard to find a tiny battery driven heater... I found this one:  http://www.alibaba.com/product-gs/486719295/ceramic_heater.html But I would have to order 2000 -_- Not really an option. The best solution so far was on this site actually.. https://www.instructables.com/id/Make-a-battery-powered-soldering-iron/ Just not sure it has the right length for my design.. I would prefer a Flat Heating element and then the Weed is placed inside a small Iron Box on Top. Also, I dunno about the hazards of that soldering iron. Any ideas? A Wire and a battery and resistance? Edit: Also found something like this: http://www.conrad.de/ce/de/overview/0506030/Heizelemente;jsessionid=DB600645BCB22DBD20445E3E530EB879.ASTPCCP9

Asked by Schoening 6 years ago  |  last reply 3 years ago


Wire a RCA Cable To A 5 pin mini USB Connector?

Wire diagram to Wire a RCA Cable To A 5 pin mini USB Connector

Asked by zeferjohn 2 years ago  |  last reply 5 months ago


How do I replace the mini lights on my Christmas tree with LEDs?

How do I replace the mini lights on my Christmas tree with LEDs? I want to use the existing wiring? Mini lights get too hot, but my tree is per-wired and re-wring would be too much trouble. Ay luck would be great.

Asked by matthewjdrover 7 years ago  |  last reply 7 years ago


How many mini loafs will I get from 1 single pumpkin bread recipe?How long to I bake?

I'm wanting to make mini loafs (6inx3.7x2in) pans of bread please advise on how many loaf pans to purchase and how long to cook?

Asked by stoliupgirl 6 years ago  |  last reply 6 years ago


USB mini female to USB mini Male?

Hey, does anyone know where I can find a USB mini Female to USB mini Male cable? I looked all over the internet and I can't seem to find it. I tried making my own, but my soldering skills aren't great, and I ruined a USB mini female port. (pins were too small) Does anyone here know where I find one? or Can make one for me? Thanks!

Posted by rayjai 10 years ago  |  last reply 8 years ago


Is a Mac Mini any good?

I am thinking about purchasing a mac mini 2009 with 4gigs of ram... Is it a good,solid mac, What is good about it? What is Bad about it?

Posted by robots199 9 years ago  |  last reply 9 years ago



WHY DOES A PET MINI CRAB BUBBLE?

I HAVE A PET MINI CRAB & YESTERDAY IT HAD FOAMY BUBBLES COMMIN OUT OF THE FRONT IT LOOKED LIKE IT WAS TAKIN A BUBBLE BATH OR SOMETHIN...

Asked by 9 years ago  |  last reply 9 years ago


Can I make smores on a mini grillit doesnt close all the way?

Null

Asked by anomyous 9 years ago  |  last reply 9 years ago


Mini v Porsche?

Will it happen? It did, but because they cars are racing in opposite directions, you don't know which one wins until the end.

Posted by Kiteman 8 years ago  |  last reply 8 years ago


Mini lcd's

I'm trying to find a mini lcd to use to display information. Sorta like the G15 has but in color. I was looking for lcds on ebay but could only find mini tv's that were expensive or computer monitors that go down to 13 inch. Does anybody know were I can pickup a small lcd around 4-5 inches maybe.

Posted by CowGuy 11 years ago  |  last reply 6 years ago



mini light?

In order to make a mini flashlight, do I need a toggle switch or will it work if hooked up correctly with out?  I ask because I hooked mine up correctly with out a toggle switch and it does not work, I have a high brightness 3mm led and it only get a short 2 second amber orage glow charge before going out.  please help. matt 

Asked by hollywood4l 9 years ago



The Thingamadoodle 300

If you've seen the thingamadoodle 300, you know thats not a very good name https://www.instructables.com/id/Mini-LEGO-Guns/  in the coments, think of a better name thanks

Posted by hrodriguez7 7 years ago


mini flashlight?

I am trying to make a mini flashlight, and it wont work.  any ideas, I have a 3mm high brightness led light, 2 3volt coin batteries and the connection wire.  Can any one explain specifically what i need, or have to do?  I'm just not getting it to work and also when the bright led lights up it only light up with an amber yellow glow for seconds before going out, upon which I have to give it a second for that to happen again...as if it needs to charge first.  What am I doing wrong? Thanks Matt 

Asked by hollywood4l 9 years ago


Where could i buy a peltier/heatsink unit?

I want to make a USB mini fridge and i don't know where the best place to get a peltier/heatsink unit would be.

Asked by robertcrosscountry 9 years ago  |  last reply 8 years ago


how many knex guns are there?

How many knex guns are there?

Asked by gangang 9 years ago  |  last reply 8 years ago


And now for something completely different....Kiteman and a few others will "appreciate" this ;-)

Words to live by: 

Posted by Goodhart 6 years ago  |  last reply 6 years ago


I accidentally poked small hole in freezer cooling line, can I patch it with flex seal or something like it?

Was de-icing my haier mini fridge, when I accidentally punctured a tiny hole in  freezer wall cooling line, it hissed for like 2 seconds. Is it safe to plug back in? and can I patch the hole?

Asked by brandon.salinas.319 3 years ago  |  last reply 6 months ago


I've just made a new friend. He's called "Womble" - Picture added!

Womble is a 1995...19,000 miles on the clock...British Racing Green...1275cc...MINI MAYFAIR!!!Yes, folks, it has finally happened. I have my Mini. Kitewife spotted him in the local free paper last night, I went to see him this afternoon, took a test drive, and I now have sore cheeks from all the grinning.I'll be taking the cash round on Wednesday or Thursday, bank allowing, and driving away in the most perfect car on the planet.Full service history, four speed box, no servos on the brakes, or the steering. Single-point injection engine, automatic choke, it is absolutely gorgeous...EDITHere he is! I've tweaked the picture a little - it was a 2-second exposure under street lighting, with the camera balanced on a wall.He's really greener than that.

Posted by Kiteman 10 years ago  |  last reply 10 years ago


How powerful does a motor cycle motop have to be to pick up a man on a helecopt er chair?

How powerful does a motor cycle motor have to be to pick up a man on a helecopter chair?

Asked by dasdew2 9 years ago  |  last reply 9 years ago


home made PC chase

I made a mini pC the dimensions is: 39 cm W/32 cm/17,5 cm High video: http://www.youtube.com/watch?v=DOEhSknZNq0&feature;=youtu.be my system is: ASUS M4A88T-M LE AMD PHENOM II X4  3 . 4 GHZ Black Edition 2 GB DDR 3  1333 Mhz  KINGSTON   x2  modül 1 TB 32MB Cache SAMSUNG  HDD  7200 Rpm XILENCE XP 500 120 mm Fan PSU 500 Watt DVR-S19 LBK Pioneer  double layer label flash SATA DVD + 2 adet XILENCE with LED 8 cm fan

Posted by trouble01 6 years ago  |  last reply 6 years ago


powerful mini crossbow?the paper clips?

The pictures this person about the paperclips dont realy help it just makes it hard(just type in mini crossbow and you will find it its called powerful mini crossbow)

Asked by waffles305 9 years ago


Old mini-blinds--can they be reused for anything?

 I have a lot of old mini-blinds and would like to reuse the slats or any other parts rather than throw them out--any suggestionsd?

Asked by archerj 7 years ago  |  last reply 7 years ago


Mini Weapons of Mass Destruction 2

Toy inventor John Austin released Mini Weapons of Mass Destruction 2 (Chicago Review Press) this past October. This awesome sequel to the Mini Weapons series includes over 30 new mini weapons with which to terrorize your office with. Here's an excerpt from the press release: "All the projects in Mini Weapons of Mass Destruction 2 are built from inexpensive, commonly kept items: binder clips, playing cards, rubber bands, markers, clothespins and discarded packaging materials. The projects - modeled after real-life gadgetry - range from "sidearms" and "weapons in disguise" to "villain mini weapons" and "surveillance and intel" and cost mere pennies to assemble. This easy-to-follow primer also features plans to construct periscopes, bionic ears, grappling hooks and code wheels. plus, each project includes a supply and tool list, italicized safety tips and step-by-step instructions supplemented by clearly marked, illustrative diagrams" I managed to get my hands on a copy and made the Grappling Hook Gun; the project was easy to follow and my project came together in under 30 minutes (including the time it took to snap a few pictures). My grappling hook went about 20 feet and I'm sure it could travel further with a few minor tweaks! So if you're reading this while sitting bored at your desk, take a look around you. If you're surrounded by un-used rubber bands, pen caps, and markers, perhaps it's time for you to assemble your own office supply arsenal! For Authors outside Canada, USA, UK and Australia The first 3 comments left here with a picture of your own version of an office supplies mini weapon of any type will receive a free copy of this book! All books have been claimed!

Posted by mikeasaurus 7 years ago  |  last reply 3 years ago



Mini knex......gun?

Are we actually starting a new era with these new "mini knex guns"? I just really don't see a point with all these mini knex guns and crossbows. Tell me what you think.

Posted by Master_Zane 9 years ago  |  last reply 9 years ago


how to remove the write protection of a mini sd card?

Asked by marquez1979 7 years ago  |  last reply 7 years ago


how to transfer movies from mini Dv tapes to computer?

Asked by srsanjeeva 6 years ago  |  last reply 6 years ago


how to make a mini guitar amp?

I have speaker which i don't use,and i'd like to turn it into the mini guitar amp.i just want pots for volume,treble, middle,bass and gain.? i'd also like to play it on battery (or a few batters). i can find a box and other materials easily.

Asked by mightynorman 9 years ago  |  last reply 9 years ago