This is a robotic airplane. The propellers speed up or slow down as the buttons are pressed.
Topic by ftking_83702 9 years ago | last reply 9 years ago
Hi everyone, I've been looking into buying COD world at war for the old zombie maps for pc. I know that there is many ways to use a controller on the pc but I don't really know how... Like can I somehow use an xbox controller to play... any idea? thanks =)
Question by aleceatsfood 7 years ago | last reply 7 years ago
I`ve got a intel 1.8 dual core, gigabyte g31m motherboard, 9800 gt 1gb graphics card, ddr2 800 mhz 2 gig and a 1gig ram in my pc with a 500watt power supply. Whenever i try to run the application badaboom( a nvidia application my pc reboots and i am not sure why. I just bought the parts about 5 days ago. Any Suggestions?
Question by Ortaega 9 years ago | last reply 9 years ago
Hey all, Today I bought a PC board (printed circuit). I plan on making a flashlight with it and some 10 mm LED's I have, but I need some info on how to use the board. If I have a PC Board, how would I put the LED's on the circuit board for all of the lights to show up at once. (hence the flashlight). If anyone could diagram it out, or tell me a good way to do this, it would be really apprciated. Thanks a ton, Nicholas Brenn
Topic by Brennn10 12 years ago
Hi I have a budget of under Â£300 and want to spend it on upgrading my PC. I need:1. GPU2. CPU3. Case + PSU4. MoBo5. RAMSo far I found this:http://www.lambda-tek.com/computing/pcdesigner.pl?cart=%0AGRAPHICSCARD%091566566%091%0ACPU%09B101000%091%0AMOTHERBOARD%09B164738%091%0AMEMORY%091490932%091%0ACASE%09B94230%091%0ANow I'm not looking for a PC that will run Crysis on highest detail but just some average games like Burnout ParadiseSo could someone advise me if this is good enough or would I need something better and if so could someone tell me what.Thanks,Kacper
Question by kacper00100 10 years ago | last reply 10 years ago
My brother make videos and we have an iMac, lets just say it is not substantial for his needs. Now just to get the point across we came up with a fair MAC-Pro, it has an SSD for faster boot and render, then a 1 tb drive for storage, a 4 core cpu, two radion hd whatevers, two monitors and no other special add-ons, price = 6,992.00 USD. Now we came up with a massive decked out PC based substantially off of Dream Machine 2011. It has an SSD, an intel i7 3.4 ghz (two more than the mac and 200 dollars less) a 3 tb massive kick ass hard drive which cost less than the one tb, 8 gb of ram for 50 dollars, the mac was well over 300. The biggest newest graphics card NVIDIA has the 590 costing about 750 dollars. Two 27" monitors a decked out sound system, a RAT 5 Mouse, a generic keyboard, v8 cpu cooler, fair case from cooler master, 1000w power supply, Blue Ray dual write disk drive thing, and the dream machine mobo. It came in at 2950 dollars and every price for parts was rounded up to the nearest 5 dollars. Mac = about 7000 PC = about 3000 Mac = less storage, less speed, less performance PC = KICK ASS Mac = is it worth it just to do videos PC = what is a good PC movie aplication/program
Question by jj.inc 7 years ago | last reply 7 years ago
Hey there, heres my problem, i have a PS2 and a computer, i only have 1 tv, it's in the living room and always in use, thus i can't use it for my PS2 but my computer could be used for such IF i can find a way to make, or if i have to, buy somthing to connect the PS2 to my PC so i can use my PC monitor and speakers to play my PS2. i would deffenantly prefer to make something though, just cheaper that way cuz i think i would have all the parts already. if u can help me out it would be greatly appriciated and if not then thanks anyway i appriciate the effort.
Topic by chaos1620 11 years ago | last reply 11 years ago
I saw a computer on here that was made on some sort of shelfing, and I was wondering what it was called exactly. There was no case, and it was used to test other parts. I recently came into ownership of a server motherboard and a HUGE motherboard with over 15 extension slots and I want to make this. Please help! NOTE: I DID SEARCH FOR IT!
Topic by Murdok 11 years ago | last reply 11 years ago
I am trying to install Mac OS x on my AMD pc but when i get to disk utility's i don't see my hard drives so i cant format it and i cant install Mac OS can any one help.i am using Kalyway_Leopard_10.5.2_DVD_Intel_Amd from this link i know its wrong to pirate things but really im only installing this to try it. i am thinking of buying a mac or at least a mac license.Now to the technical information.i have 3 partions set up 1 for windows:50G NTFS1 shared:10G FAT321 for Mac OS x:45G FAT32i have aCompaq presario F700 with xpAMD Athlon 64X2 Dual-Core Processor TK-57 1.60 GHz, 960MB of RAM
Topic by chrischavez 10 years ago | last reply 9 years ago
Who remembers Cyrix CPUs?PCs that had a "Turbo" button?The "awesome" (at the time) quad speed optical drives?Voodoo graphics cards?SCSI?56K modems being "leading-edge" technology?16M colours being something more than slightly impressive?4Mb RAM being above average?A 486 DX2 being the best you could get?A 100 Mb hard drive was bigWindows came on a set of floppy disks (95 being about 40 of 'em or something stupid)?Loading Windows off floppies?Nestscape Gold Navigator 3.0?Alta Vista?It's not even 20 years ago...L
Topic by lemonie 9 years ago
I am trying to build a computer with more knowledge than last time i was trying to do it, here are my parts listProcessorMotherboardHard DriveCD/DVD DriveMemoryCaseI have a Gateway computer company Vista OS from my old gateway computer, will this work with a non Gateway interface computer? If not, then i will probably download linux to my usb and upload it to the computer. P.S. i already have a monitor
Topic by Caveman477 10 years ago | last reply 10 years ago
I have Pinacle Studio Software. After opening it is not opening any file for the few days ( previously it used to open) for editing purpose. Today after opening the software, i got the pop up as folows. UMI Usermade ISR IRQ Source IRQ Priority - Low - Medium IRQ Properties High Statistics Terminate UMI : Warning No IRQ Driver selected ok Kindly advice me further course action. Regards Bala TV
Topic by balatv44 11 years ago | last reply 7 years ago
Helloooo peeps, i have an iPAQ pocket pc running ms pocket pc ver 3.0 I have seen fool keyboard pads that can be bought commercially, but i wonder if there are just the numeric keypads like those usb external 15 keypads for laptops??? i hate the numeric touch screen that the iPAQ os provides. any help anyone??
Question by DAVID_A 8 years ago | last reply 8 years ago
Hello, For some reason, My pc will cut off internet to websites and such, while maintaining connection with things like Skype and certain parts of steam (e.g. Chat, games, etc, but not store, profile, anything website-based) and all I have to do is restart my PC, which is anoying, cause my pc starts up slow, and has a myriad of startup programs. Has anyone had this problem before, and fixed it? please help me out, I would be very thankful. Thanks in advance, Krayzi99
Topic by Krayzi99 6 years ago | last reply 6 years ago
This idea just popped into my brain last nite.Why not use strong automobile fans to cool the PC?Just mount it on the panel(geek points for duct tape)and off u go!Most engine fans run on 12VDC now and a pc has that,then SPLICE THE TWO TOGETHER!Advice and flaming will be appreciated
Topic by Derin 10 years ago | last reply 10 years ago
Someone PM'd me about a contest to create something new with their old PC. I was going to enter but unfortunately it is only open to US residence. I thought I would pass this along since there are a lot of Instructables posted that would be eligible for this contest (provided that you are from the US). The prize is a PC. Here is the link: http://vizio.maker.good.is/
Topic by ChrysN 6 years ago | last reply 6 years ago
I'm trying to find a simple way to turn on my PC multiple times each day. I use the BIOS to turn it on now to record radio streams. I'd like something external to the PC, and something I could use to set several On Times each day. I don't know where to start. Should I attempt adding a relay to parallel the PC's power switch and then activate the relay? Should I attempt to build Rube Goldberg mechanism to mechanically activate PC's power switch? Wake-On-Lan doesn't seem to be the answer as how would I reliably send signal while I sleep? Even if you don't know of something specific, I'd be interested in where to look or approaches to investigate. Thanks, Scott
Topic by tscottme 11 years ago | last reply 11 years ago
If I were to build a gaming PC and put Linux on it (probably Ubuntu or Mint) Could I play decent games on it? such as First person shooters, strategy, and RPGs? I'm hoping for more like main-line games (COD, Halo, Age of Empires, Civilization....), not shady, third party download type games.
Question by dkop1 7 years ago | last reply 7 years ago
This is just a quick forrum post telling anybody who is interested where they can find old PC 133 memory. I don't know if any other nerds are still running old old old computers that use PC 133 memory but I sure am. I know from experience that sometimes it can be very hard to find memory sticks for upgrade/replacement. But here is a great place to get 256mb modules of old PC 133 memory: http://www.goldmine-elec-products.com/prodinfo.asp?number=A20386 The memory modules are new and are pretty cheap. Goldmine Electronics also has lots of other cool stuff. Hope this helps some of you.
Topic by nurdee1 7 years ago
Hey guys...i was just wondering two things. First, is it theoretically possible to build one of these nintendo pc's to be operated as a fully functional pc for gaming and internet use, with your tv as a monitor and to install jacks to be able to connect to a surround sound system? also, i am not too good with computers and all that jazz but ever consider a nes controller that would operate as a mouse? this, of course, would be assuming that you could use your pc in the way i mentioned above, if not it would be kind of pointless. i also thought it would be nifty if it could be a wireless deal...you know...just so you don't have to sit 3 feet away from your television...
Topic by mr_bojiggler 11 years ago | last reply 11 years ago
Hi Guys! I need some help. I recently got several pc power supplies and I don't know how to turn them on. That sounds stupid, but I don't really work with them much. I tried plugging it in expecting the fan to at least turn on, but nothing happened. No outputs from any of the leads either. What am I doing wrong? Thanks!
Question by transistorguy 8 years ago | last reply 8 years ago
I have a Check and Correct Calculator with 120 steps, I need to upload the data stored on the memory of the calculator, I mean the 120 steps all together into a excel file, or to a text file. Any ideas on how to convert a calculator into a small pad?
Topic by lmarkez 8 years ago | last reply 8 years ago
I have a big outdoor plastic closet with shelfs in my garden. i want to place a pc with crt screen inside heating the space in which the pc and screen are to be located is 1/4 m3 (1 m wide x 1/2 m deep x 1/2 m height between the shelfs) or 1/2 m3 (1 m height) but with other objects sharing the space the computer is a pentium 1 (~40 W power). it is intended to be on for long periods with the door closed. the closet stands in a shaded place but air temperature outside can get to 35 C + sometimes. i dont want to cut vent holes in the closet the monitor (15 crt) is off when the door is closed. though i may switch it off and close the door while it is still hot how to prevent overheating ? is a water tank thermostat set to 45 C in the air near the pc (with the 240 V to the pc going thru it) good enough thermal protection ? insects we have lots of ants. how to protect the pc from them ? will the hot air in the closet be enough to distract them ?
Topic by 11010010110 9 years ago | last reply 9 years ago
After seeing www.newgrounds.com/portal/view/487585, I learned that they used iStopMotion for the graphics. Also, I was able to play on a Mac, and I have to say, I kinda dig it. Is there anyway possible for me to install the Apple OS on my computer and still keep my current OS (Windows XP)?
Question by MrL33TPenguin 8 years ago | last reply 8 years ago
Hi guys, I recently salvaged a decent PC runing on a Pentium 4. I got a LCD monitor with it too, and was in hope of making a DEDICATED jukebox. I was wondering if ther is some OS for a pc thats sole purpose is to store music and replay it, with some customizations available of course. If not, I see that there are plenty of jukebox software out there to install on linux or XP, but I was wondering if there was any program that executes itslef when windows start. Please and than you for any help!
Question by SteamOh 6 years ago | last reply 6 years ago
Hi every body , i have 2 questions about the pc stick, these days im planning to buy a laptop , so i searched for an android laptop and i found the amazing android mini stick pc , bu i have two questions about it , can i use it as a laptop using linux operating system , can i use photoshop and photo editing softwares easily , and photoshop its really what i need , and without it i cant do anything , and the second question is there small screen to connect the stick with it and the both of the stick and display will be portable just as a laptop. wich is bets the mk0808 or the minix thanks waiting answers!!
Question by vwtm2006 5 years ago | last reply 5 years ago
Ok I've got an idea of a aarcade like gun that could be used for your everyday PC \lappy. I was thinkin that people could probably use the arcade gun for a mouse. Instead of using it just for game etc it could used to play FPS game and even for FPS creator so instead of using your mouse it could be as if you were the character and the one who is aiming!!! I even noticed that the newer or older? guns with a slide would be cooler.
Topic by kenexinator 9 years ago | last reply 9 years ago