that piece is this?

Eu quero  construir um  Arduino  e preciso de um  regulador de tensão  entre as peças  que eu tenho esse  é o mais  semelhante ao  que  encontramos  na internet

Asked by ualbuquerque 4 years ago  |  last reply 4 years ago


I have about 25 nos of old gramaphone plates what can doe out of it?

Asked by vishesh 9 years ago  |  last reply 9 years ago


What is this Lego piece? Answered

I found this in my Lego collection and I don't know what it is. Any help appreciated.

Asked by JM1999 4 years ago  |  last reply 4 years ago


How to use this piece Answered

Well looks like a digital player, I've tried to attach a battery in various terminals but nothing happened even short-circuit, furthermore wanted to know how to do it lyrics

Asked by ualbuquerque 4 years ago  |  last reply 4 years ago


Piece List Please? Answered

I would like a piece list for the Big Ball Factory please, no hurry.

Asked by TwistedParadox 9 years ago  |  last reply 2 years ago


Favorite Art Pieces

What's your favorite art piece?

Posted by puffyfluff 10 years ago  |  last reply 10 years ago


Joining carpet pieces

I'm looking for ideas on how carpet pieces might be joined together into a whole (e.g. rugs made from carpet samples). The gaffer tape solution which is posted all over the web in tutorials isn't strong, only lasts a few months and doesn't work well with small carpet pieces.  I've successfully sewn carpet piece in the past with fishing line (so the stitches are strong and invisible) however this technique only works well with larger pieces due to the time it takes and amount of work.  Has anyone here tried any other techniques and been successful with both large and small carpet pieces?  My other idea was to use wood glue to glue the pieces to a hessian sheet.  I haven't tested this but the hessian base on most carpet pieces should merge well with the hessian sheet. thoughts or ideas appreciated.

Posted by garrettlynch 1 year ago  |  last reply 1 year ago


One Piece braiding?

Does anybody know how to Brade using one piece of material with 2 slots cut into it? I saw instructions on this years ago but don't remember where.

Asked by gockers 8 years ago  |  last reply 8 years ago


Knex piece names

It gets annoying when making an instructable, you find that you need. 5 black clips or 30 grey clips, and so on. can some one get together a proper set of names for all those little pieces that no one can describe?

Posted by I_am_Canadian 11 years ago  |  last reply 10 years ago


What is this lego piece? Answered

What is this piece? it is two by two platforms joined by a span roughly 3 cm and flat like a baseplate, meaning there's no interlock mechanism underneath. The plastic looks like glow in the dark plastic.

Asked by aaron.kuhlman.9 4 years ago  |  last reply 4 years ago


Guess the Pieces contest!

Https://www.youtube.com/watch?v=ujG-N3goqKgHello, So recently, I’ve finally finished counting all the pieces in Convolution. I thought it might be a cool idea to make a contest about it. There will be separate categories with points awarded in each category. The one who has the most points wins! You are allowed to give ONE guess for each of the categories. Here are the categories and the scoring system for each one: 1) Grand Total: Guess the grand total of the piece count. The closer you are, the more points are awarded. If you are within 50 pieces, you get 10 points, within 100 you will get 8 points, within 250 and 6 points are awarded,  within 500 and 4 points are awarded, within 1000 and 2 points are awarded, and within  2000 1 point will be awarded. 2) Most Common Piece: Here it is simple; just give your guess of the most used piece/part in the machine, and the amount of times it occurs.  You will get 2 points for guessing the correct piece/part, and another 2 points if you are within 50 of the amount of pieces used. 3) Least Common Piece: Just as simple as the second one, guess the least used piece/part in the machine and the amount of times it occurs.  2 points will be awarded for the correct part/piece and another 2 points if you correctly guess the amount of times it is used. 4) Price Total: In this category, simply give an estimate of what you think the price of the machine would be if you were buying it piece by piece from the K’nex website.  Prices are based firstly on the K’nex website, and if the piece is not found there, the price will be based on the price of the K’nex User Group. Prices are calculated in USD. If you are within $25, you will get 6 points, within $50 and you will be awarded 4 points and within $100 and you will be awarded 2 points. For reference, my room measures 2.28m(7’6’’) high, by 3.65m(12’) by 2.74m(9’). Also, here are some pictures and the video for reference as well. Video: https://www.youtube.com/watch?v=ujG-N3goqKg Best of luck to everyone.  The contest deadline will be February 10.

Posted by koolcoasterkid 4 years ago  |  last reply 4 years ago


that piece is this? (image, electronics) Answered

Well, I wonder what electronics part is that I have, seems to be an integrated circuit progamavel, found her in a radio circuit.   It is written: SAMSUNG S603V S1A0426CO2-SO          KD8025G And I would like to know how to search on the internet specific parts like this

Asked by ualbuquerque 4 years ago  |  last reply 4 years ago


Piece Efficent SlamFire

It is what the title says. And I designed it. Here is a link. https://www.instructables.com/id/Project-SlamFire-With-Video/ If you are too lazy for that, here is the shooting video.

Posted by CorgiCritter 3 years ago  |  last reply 3 years ago


What is your favourite piece in Knex?

Hi everyone, just out of interest, what is your favourite piece in knex? My favourite piece is the little black end cap and closely following is the long black rod! Did you know that the reason why the long black rod is stronger than the long grey rod? The answer is because there is carbon in it!

Posted by JM1999 4 years ago  |  last reply 4 years ago


One Piece should come back!

Recently I've been wanting to watch One Piece, since I heard that FUNimation had begun dubbing it. Apparently this had happened about a year ago, but since I had stopped watching it on Cartoon Network, I didn't know till I saw an episode with different voices. It was great! A lot of stuff was cut out in the 4kids dub, and the voices were downright awful. Especially sanji's retarded voiceAnyway, the FUNimation dub is really more loyal to the original, and featured a lot of things 4kids left out, like blood, dialogue, or even entire arcs! They cut out one part about a whale and a lighthouse, which at the time didn't seem like much more than filler, but as it turns out, was the background story for a new friggin crew member! So basically, 4kids had completely ruined continuity. The FUNimation dubs on CN was the best thing that ever happened! Yup! All 15 episodes it ran. CN canceled it for no friggin reason, even though the FUNimation dub was quickly gaining much higher ratings than the 4kids one.The main reason I am angry, is that I can't watch the GOOD version o One Piece on tv, because CN is stupid. And I can't watch it on the internet, because FUNimation is too copyright...y... And the DVDs are quite expensive. I can't watch 4kids version now, knowing all the stuff that's missing. All the wounds that should be there. All the facts that have been ignored. All the 9 year old voices on 20 year old men. All the serious themes dumbed down for stupid 8 year with their fingers up their noses! (okay, so my finger is in my nose now, but that's not the point!Basically, this is a rant. Anyway, if anyone likes One Piece, please discuss how idiotic and retarted 4kids is, and how you hope they get ****ed in the *** with an iron stick hard from multiple angles for making a great series just udder ****!

Posted by Keith-Kid 10 years ago  |  last reply 10 years ago


CameraEye

I would appreciate any assistance with the following idea. I basically want to duplicate the small VGA viewfinder of my digital camera in a monocle piece for my eye. Would it be possible to hack a LCD viewfinder from one camera (or other device) to input from the VGA cable from the active camera? You can purchase various solutions off of the web, with some monocles in the $3000.00 range! This has to be doable. Anyone? Thanks!

Posted by blackobsidian 10 years ago  |  last reply 10 years ago


How much knex does an average knexer like you have?

I'm bored, so I wanna know how much knex you have. here's my list: (pictures would be fine too) big ball factory set: 3000+ screamin sepent set: 1200+ rippin rocket set: 1200+ an old knex crane set: 1000+ terrain trekker set: 400+ a yellow knex carry case: 300+ a lot of little sets: 800+ total: 8000+ pieces

Asked by Mr. Muggle 9 years ago  |  last reply 3 years ago


Piece List - Screamin' Serpent? Answered

As above

Asked by TwistedParadox 9 years ago  |  last reply 9 years ago


piece list for vertical vengance?

Im just wondering so i know if i get my moneys worth thanks

Asked by coreyt 9 years ago  |  last reply 7 years ago


Looking for Specific K'NEX pieces!

Hi there, I'm looking for 2 specific pieces for my next K'NEX Slave I Starfighter project. The pieces are: - 2 times K'NEX Fluorescent Ball Half (http://www.knexusergroup.org.uk/acatalog/info_K90973.html), will be used as thrusters - 2 times K'NEX "mini missile launcher" (not listed as individual item), will be used as weapons for this build. Images found in attachments The Ball-half appeared in the following sets: - K'NEX Apollo-15 Lunar Lander, set number #13147 (only 1 piece) - K'NEX Saturn V Rocket, set number #15122 (two pieces) The miniature missile launcher appeared in the following sets: K'NEX Mech Warrior mini series 1 & 2: "Firefly" #11148" "Uziel" #11146 "Vulture" #11142 "Hollander II" #11152 "Thor" #11144 "Uller" #11150 If you have: These pieces and want to sell them individually These pieces, but want to sell them in a set any information, where to buy them, then post a reply comment, send me a Personal Message or mail to: GWorksmocs@gmail.com Thanks, GWorks

Posted by GWorks 2 years ago  |  last reply 2 years ago


how to cut knex pieces??? Answered

I wil cut a orange connector but how??

Asked by cool bas3 9 years ago  |  last reply 9 years ago


A piece of avitaion history for sale.

Well, quite a few pieces actually.Anybody fancy owning a piece of Concorde?The pdf catalogue is 112 pages long, and features some amazing things - windshields, landing mechanisms, bits of wings, pumps...

Posted by Kiteman 11 years ago  |  last reply 11 years ago


what is this white piece in a ds for? Answered

Hi all, recently, i had to take apart my DS lite to replace the button panel. when i got it apart, i saw that there was this white piece in the ds i took the panel from, but it wasn't in mine. unsure if it was required, i put it in mine. what is this piece for anyways? if it helps, i have a polar whit ds lite, and i believe it is a 3rd gen, judging by the fully covered wifi reciever in the base of the unit. but what is this white piece for? (its right beside the stylus slot)

Asked by zack247 8 years ago  |  last reply 8 years ago


what lego pieces float? Answered

Hi i have a question are any of you good at making lego boats because i am planning to make a floating lego boat

Asked by rosie feather 2 years ago  |  last reply 2 years ago


Pump for little pieces of paper

Hi, I'm going to make a display cabinet for an art project. Please see image for more info. The idea is to have a container (gray box) with ash on the back side of this cabinet, then there should be a pump (red dot) emptying this container and blowing the ash to the front true a tube (see red line) into a double glass window.  How can I create something like this? the problem is the transfering of the ash (little pieces of paper) from the back to the front.

Posted by vkranendonk 9 years ago  |  last reply 9 years ago


New Low-piece Crossbow

I was building crossbows all over the place this weekend, at one moment I had one that was twice as large as the Reaper, but I lacked pieces to make it sturdy. This started out as a low amount of pieces Reaper, but I eventually made it a small crossbow which has about 80-95% of the Reapers power. Although it has the power and probably also the distance, it doesn't have a double arrow trigger(only one arrow) and I don't think it is able to fire properly without trigger. It is however, compared to the Reaper very practical, light and easy to fire/load. Btw there are 4x3 rubberbands on it in pictures. I don't know if I am going to post this one though, maybe if its really needed :P

Posted by Wicky 10 years ago  |  last reply 10 years ago


Finally getting more pieces

I'm not exactly big on money at the moment. College student and all with limited working hours. Luckily, I have parents paying for a lot of expenses so I really only have to cover food that isn't under my meal plan and any other misc things that I want on the spot for supplies or entertainment. But I recently just got $25 online from doing surveys which I decided I'll put toward getting more pieces. I can't be bothered to buy all the pieces in one bulk, so I'll just probably be ordering big things of yellow connectors, green rods, and white rods to start. When I get more money I'll get other pieces, but those will already help me create a lot more things. Yes, I'm finally actually being bothered to get more K'nex in the 3+ years I've been K'nexing. So of course then the question is what things should I build now? There are a lot of things that I want to make just for the sake of putting my own spin on them. For example, I recently rebuilt my UMP from a lack of patience and a need to have something around the dorm room again (possibly using it in a video my friends are making with nerf guns). I was thinking I might have a go at making a personal assault rifle. That is, those weapons (can't think of the names of any examples) that people built mainly to have a lot of features, look somewhat like a real assault rifle in style though with their own design, and not built exactly to be great in function. I figured I'd use my UMP as a starting point. I actually wanted to make mine look decently realistic. So yeah, that'll be a just-for-fun weapon. Any other suggestions? I'm thinking less about new concepts and more about things I can put a personal spin on or perfect.

Posted by TheDunkis 7 years ago  |  last reply 6 years ago


Ideas Welcome- Piece limited

Hey. Yeah, haven't really been k'nexing much lately nor do I think I'll be doing it much longer. Long story short, I'm taking college classes for my last semester of high school for credits in both and yada yada so I have more and less time. More because I don't have much homework and I only have one class on Thursdays which means an entire open afternoon but less because I'm a lot more occupied on other days with other activities. But I decided to crack out the K'nex again. I need something somewhat innovative. Or maybe not innovative but just something that we don't have enough of. For example, an updated BAW was one of my ideas. The problem is that I have limited pieces. Take a look at my updated UMP, folding gun, or my BAW (red rodded stock version) for a general idea of how limited I am in pieces. So I'm obviously looking to make something compact. I was also thinking of expanding on my charging handle pin concept. Perhaps combine BAW and TBAG concepts for a shelled weapon. We still lack practical shell guns. As much of a hassle as they are compared to chamber action weapons and turrets, shells are still a perfectly reasonable (and more so, less complicated and less bulky respectively) method to get more range. But it's up to you what I build. So any requests?

Posted by TheDunkis 8 years ago  |  last reply 8 years ago


A non piece consuming knex rifle

Can someone find me a non piece consuming knex rifle? D:

Posted by SomeAsianKid 7 years ago  |  last reply 7 years ago


SMALLEST KNEX GUN!!!! 1 PIECE!!!

I made a one piece knex gun. Pick up ANY knex peice, and throw it!!!!!! Lol this was just meant to be a joke.

Posted by Ratchet and Clank 10 years ago  |  last reply 8 years ago


How to Make an old lamp decorative piece

How to Make an old lamp decorative piece

Posted by ward2u.com 8 years ago  |  last reply 8 years ago


Assassin's Creed 1 & 2 Piece of Eden Apple

Everybody has been making their own hidden blades, but how about we try another item from the game? The Piece of Eden apples. They are glowing, futuristic spheres, which have the ability to control people's minds and cause intense Hallucinations. From seeing them, it looks like we can use the same basic Idea as this guy here with a Glowing box: https://www.instructables.com/id/Awesome-led-cube/ The Apple looks very similar in that the light emanates from behind the metal pieces, glowing at times, and you'd also need a way to turn it off and on, or for an added effect, but an electomagnetic switch inside instead of a pushbutton, where you can hold it and make it glow, but when you hand it off, it fades, or it only glows when placed on a base or something of the such. Just thought i'd get the ball rolling and see what we can come up with!

Posted by EragonShadeslayer 9 years ago  |  last reply 6 years ago


hey can anyone give me the Piece list for Knex 6 foot ferris wheel-http://knex.com/Thrill_Rides/6-foot-ferris-wheel.php? Answered

Http://knex.com/Thrill_Rides/6-foot-ferris-wheel.phpthe large ferris wheel

Asked by getoutofhere623 9 years ago  |  last reply 7 years ago


I don't think that peice count should be a con for knex guns

I have seen too many guns with a peice count as a con.  I think that the cons should only be cons that acually detract from the guns performance, not a thing that limits its buildability.  (new word!)

Posted by TheChemiker 8 years ago  |  last reply 8 years ago


How many of each piece are used in the knexsayer? Answered

Does anybody know? Because I really want to build it but I don't want to run out of pieces while building. At the very least, can someone find out how many green rods and yellow connectors there are?

Asked by KillerPanda 10 years ago  |  last reply 9 years ago


Can someone make a piece list for the Loopin' Lizard? Answered

As above

Asked by TwistedParadox 9 years ago  |  last reply 9 years ago


What are the nubs on gold knex pieces for? Answered

The half circles with the nubs.. What were they made for?

Asked by Wafflicious 10 years ago  |  last reply 9 years ago


Wanted: Two Specific K'NEX pieces

Hi there, I'm looking for 2 specific pieces for my next K'NEX Slave I Starfighter project. The pieces are: - 2 times K'NEX Fluorescent Ball Half (http://www.knexusergroup.org.uk/acatalog/info_K90973.html), will be used as thrusters - 2 times K'NEX "mini missile launcher" (not listed as individual item), will be used as weapons for this build. Images found in attachments The Ball-half appeared in the following sets: - K'NEX Apollo-15 Lunar Lander, set number #13147 (only 1 piece) - K'NEX Saturn V Rocket, set number #15122 (two pieces) The miniature missile launcher appeared in the following sets: K'NEX Mech Warrior mini series 1 & 2: "Firefly" #11148" "Uziel" #11146 "Vulture" #11142 "Hollander II" #11152 "Thor" #11144 "Uller" #11150 If you have: These pieces and want to sell them individually These pieces, but want to sell them in a set any information, where to buy them,  then post a reply comment, send me a Personal Message or mail to: GWorksmocs@gmail.com Thanks, GWorks

Posted by GWorks 2 years ago


is there powerfull knex gun with hardly no pieces?

Asked by Braderz1 9 years ago  |  last reply 7 years ago


Looking to manufacture a piece of fitness equipment

I am looking for a manufacturer to help produce a new piece of exercise equipment. A professional prototype is needed. 

Posted by Vin723 4 years ago  |  last reply 4 years ago


how to get knex pieces on bricksmith

Title explains it.

Posted by the dawg 10 years ago


What to do with random pieces of plexiglass?

I picked up several pieces of scrap plexiglass and haven't figured out what to do with them.  Ranging in size from 1/4 - 3/4"thick, black white and clear....any creative ideas out there?

Asked by lizzies 7 years ago  |  last reply 7 years ago


Powering LED strips that are cut into pieces?

I ordered an LED strip off Ebay and it came with a AC/DC adapter 12v 5A It powers the 5 meter bright white LED strip great. However, if I cat this strip into say 3,4 or 5 pieces. I need to know what I need to buy to power each of these pieces.  My understanding is that the adapter that came with the strip will now be too powerful for the smaller strips and I don't want to buy over-powered adapters for the cut pieces. Also how do I go about with the actual connection to the led strips as seen in my photos.

Asked by Pinguino72 3 years ago  |  last reply 3 years ago


Wanted pieces of Corian countertop material

I am looking for a source of Corian countertop scraps. Not the 4 x 4 sample chips, but bigger pieces (12" x 4" or larger) any color. Anyone have any to sell at a reasonable price or know of a place to get scrap Corian? Thank you!!! Email me at Thymetochat@aol.com

Posted by THYMETOCHAT 9 years ago  |  last reply 9 years ago


My opinion on moddifying K'nex pieces

09/10/2013 Modding K'nex and/or using broken pieces is CHEATING more importantly it is unskillful. A K'nex gun should be just that... a "K'nex" gun! I've noticed a growing number of designs that use modified K'nex pieces that are cut or mangled somehow to get the gun to function or look a certain way. I'm not saying that this is a sin however I would like to challenge each of us to challenge ourselves by building guns that are true K'nex guns with true K'nex unmodified parts. I have been guilty of this once in the past myself so don't take this to heart. All I am asking is this... I am impressed and more inclined to build a gun that doesn't required or include any broken pieces over a gun that requires any. It is a pet peeve of mine because to me the art of building is using what we are given and creating with wit and ingenuity something great! Again I am not condemning people... I only trying to encourage the art of K'nex guns that don't use broken/modified pieces. Lets do our best to clean up our work and build impressive guns without changing the pieces! Thank you to those that build clean keep it up I am excited by the community at large. It is very cool to see everyone's designs I learn from each and everyone of your creations! Keep up the good work, and lets continue to get better!

Posted by Knex Lego Maniac 5 years ago  |  last reply 5 years ago


Is there a way to preserve chocolate- as in for an art piece?

I make chocolate art pieces and I am looking for a way to mount one on a wall.  I put a couple of the pieces in an art show into plexiglass frames but they had to sit tabletop.  Maybe encased in resin, but I would need a cold resin so as not to melt the chocolate.  Below is a photo of some of my chocolate art I would like to preserve/encase and mount on the wall but I really don't know how! This photo looks wall-mounted but again, it was shot tabletop.

Asked by straightouttachocolate 8 years ago  |  last reply 3 years ago


How to cut pieces of rubber sole? Answered

I'm currently making a pair of rollerskates out of army boots and other things. The rubber is in the way for a few bolts on the baseplate, and cutting the rubber away with a small stanley knife just ended in bloodshed. Does anyone have a better idea?

Asked by cephalopoid 8 years ago  |  last reply 8 years ago


Piece List - Big Air Ball Tower? Answered

As above

Asked by TwistedParadox 9 years ago  |  last reply 9 years ago


bruce911's knex xm8/fn scar gun?

I want to build it but i dont know if i have enough pieces. if you know, can you post a piece list? thanks, chopstx

Asked by chopstx 9 years ago  |  last reply 8 years ago


Does the 550 K'nex piece tub have this piece: http://www.knex.com/building_toys/stard_black_rodconnector.php in it? Answered

I want that piece badly because I want to make K'nex guns. Unfortunately, I don't have it. I am planning to buy the 550 piece K'nex tub and I think it has that piece, but I'm not sure whether it contains that piece or not because I do not want to spend money on a K'nex set that doesn't have what I'm looking for. And also, Does it also contain spacers and hinges?

Asked by 0922997 8 years ago  |  last reply 5 years ago