homemade psp action replay?

Can you make your own psp ar if so post the link to the instructable!!! i thought of this when playing R&C when i was battling klunk thinking wow i sure could use some cheats now!!! can you mae on using a memory stick while still keeping saves?

Posted by GASSYPOOTS 6 years ago


How do I make ar codes?

That is it pretty much, for the ds

Asked by samskinburg 8 years ago


i was wondering about action replay codes

Is there any thing like an action replay code generator? or is there a good site where i can find codes?

Asked by coldpsyco91 7 years ago


part 2 is out!

Https://www.instructables.com/id/how-to-edit-action-replay-codes-part-two-find-the/https://www.instructables.com/id/how-to-edit-action-replay-codes-part-two-find-the/https://www.instructables.com/id/how-to-edit-action-replay-codes-part-two-find-the/https://www.instructables.com/id/how-to-edit-action-replay-codes-part-two-find-the/

Posted by dsman195276 10 years ago


Is anyone else disturbed from Replay?

I always get so upset when I listen to Replay by Iyaz. I mean he has bad grammar, " Hoping you would give me a chance, who would of ever KNEW that we would ever be more than friends."   Blargh.

Posted by happyjo 7 years ago


teaching videogames a lesson

Https://www.instructables.com/id/how-to-edit-action-replay-codes-part-one/this is part one of my how to edit action replay codes to hack videogames!!!!!!

Posted by dsman195276 10 years ago



Printout? Answered

1. You mentioned a printout. Where is it?2. This lesson FLEW by. Can I replay it? How?

Asked by ruthbernstein 1 year ago



Missed the online class? Answered

I missed the online class, can I see a replay online?

Asked by DigitalJakeT 1 year ago


Cannot login in my instructables!

 https://www.instructables.com/id/Make-your-own-GUIgraphical-user-interface-in-Micro/ This is my instructable's link. I cannot login to my instructable, to replay to the commends, My friends also tried to login ,they also not able to follow me , or make it as their favorite  or not even vote for me in a contest. .  Kindly resolve it fast , other wise I will get failed in the contest and I'm not able to give replays to the earlier messages!...

Asked by NIKHILP3 2 years ago


how to repair dv9000 laptop vga?

My dv 9000 lap vga is .blaring how me i repair it. or replays it .rip me soon.. 

Asked by janakam 8 years ago


Simulate sounds for RC Car using micro-controller and MP3 replay?

Hello!  I'm new micro-controller, very new.  I want to simulate custom sounds for my RC car.  What I want to do is spy on the car servos/esc and trigger different sound effects using this MP3 replay: http://www.electronics123.com/s.nl/it.A/id.3041/.f Can someone help with what I need to make this work? Please be specific.  Thanks!

Asked by triggerxxx 6 years ago




LED Flasher Relay

Can anyone help me build a LED flasher replay capable of running approximately 100 LED's. I would like it to alternately flash and have a strobe like effect, similar to what most emergency vehicles have!!! Thanks Dave

Posted by Jeepcop274 11 years ago


What psp games have good graphics and have a good replay value?

I just bought my psp3001 version 6.8, and i was wondering what games have the best graphics and are most fun to play.

Asked by Matrix-technician 7 years ago


help me to wheelchair joystick hack

I wanna circuit diagram of the connection between the 2 joysticks and ardunio....the interface circuit...any information about hacking jc2000 joystick of wheelchair will help me in may project pls....waiting for your replay https://www.instructables.com/id/Psycho-Scooter-Scramble/

Posted by dany151 5 years ago


make interface for sending text (using vb6) to a running led matrix arduino uno?

I was succed to make my running led matrix using arduino uno, now i get trouble to make interfaceng for it (sending text etc). thanks alot for your replay..

Asked by faisolhanif 6 years ago


i want to make a razer robot.....

I find some things like 12v solenoid valve , 12v hydraulic hump & motor ,but still can someone tell me ,how much SPI is required for mine hydraulic pump and what should be rpm for motor , mine robot's double acting cylinder's bore is 40mm and stroke is 150mm(15cm).. pls replay soon...........

Asked by vish3385 4 years ago


C++ help

Hello programers i need ur help, i need c++ program that control dc motor by 2 inputs U for Up and D for Down , so once  press U cycle duty increases by 25%  until reach max and press D for decreasing 25% until stop i hope  getting replays soon thanks all

Posted by nerofromeuro 3 years ago


LDRS (Large Dangerous Rocket Ships) Rocket Competition hosted by Kari Byron

I just finished watching Kari Bryon hosting a Rocket competition on the Science Channel in Lucerne Valley California I Missed the initial showing on July 5th.   But they seem to be replaying it now and then (I saw it on July 10th, at 10 PM EST

Posted by Goodhart 8 years ago



Resistors for a project, easy question!

Hi all, This is an easy question about resistors, its been years since I use any. So, I have a replay which is rate 12v DC and 2amp. The power supply is 12v DC and 6 amp. V = I X R R =  V / I so R = 12 / 2 = 6ohm So I need a 6ohm resistor? Is that correct? I can't believe I have forgotten this! thanks Gary

Posted by garynobles 5 years ago


PC Jukebox OS?

Hi guys, I recently salvaged a decent PC runing on a Pentium 4. I got a LCD monitor with it too, and was in hope of making a DEDICATED jukebox. I was wondering if ther is some OS for  a pc thats sole purpose is to store music and replay it, with some customizations available of course. If not, I see that there are plenty of jukebox software out there to install on linux or XP, but I was wondering if there was any program that executes itslef when windows start. Please and than you for any help!

Asked by SteamOh 5 years ago


How to wire an actuator to reverse polarity with relays only, no switchs?

I'm using the L12 S Firgelli actuator in my project. If I applied 12v and Ground to respective leads the actuator will expand if I reverse the wires the actuator will retract. I need this: When I turn my car on the actuator will expand and when I turn my car off the actuator will retract. How do I wire the relays? Again I don't use a switch. Thanks

Asked by kpitao 7 years ago


Modular humioniod robotics? Answered

Hello my name is Alex, I have a very early stage idea for a modular humioniod robotic development platform. I'm looking for information, a point in the right direction to all things modular robotics. Books, threads,forums, drunken scribblings on a napkin I don't mind. What I would really like to do is a open source collaboration, where people can make either the whole thing or just indavidual modules. What do you think? Great idea? Dumb? Totally unachievable? All comments and replays welcome, positive or negative Thanks in advance Alex

Asked by AlexC229 2 years ago


Just click this sentence now.

So there is no reason at all for this forum so why are you even reading it. Just kidding there's a reason for everything. Okay so if you replay to this then i will get and email saying that i have a new comment on instructables. I have never had more that like 16 new emails at once because i check it quite frequently. so i ask that you reply because i thought it would be funny to get so many reply's that i have like at least 80-100 new messages. thank you for your consideration. (hunger games reference)

Posted by ThePregergater 5 years ago


Ideas and information on modular robotics specifically humionoid but not exclusively

Hello my name Ian Alex, I have a very early stage idea for a modular humioniod robotic development platform. I'm looking for information, a point in the right direction to all things modular robotics. Books, threads,forums, drunken scribblings on a napkin I don't mind. What I would really like to do is a open source collaboration, where people can make either the whole thing or just indavidual modules. What do you think? Great idea? Dumb? Totally unachievable? All comments and replays welcome, positive or negative Thanks in advance Alex

Posted by AlexC229 2 years ago


how to get current track name using breakout shield

Hi! I am using the vs1053 breakout shield from adafruit that is hooked up to Arduino. I wanted to write an if statement that if the currentTrack name is not equal to the name i set it to then the code will restart the loop and they are not equal then it will play the song (this is so that every time the loop runs it won't replay the song if it is already playing ). Do you know how i would be able to get the name of the track that is playing using currentTrack? it is not very clear on how to use it in the library reference...also is there another easier way to do this? Thank you! if (abs(newVector - storedVector) Serial.println("MOVING SLOW!!"); trackName = "track001.mp3"; if (currentTrack==trackName) {      loop(); } else {      musicPlayer.startPlayingFile("track001.mp3") } }

Posted by jvan27 3 years ago



accelerometer controller

Hi I’m making an accelerometer (3-axis) that I want to be able to work in some programs and games. I haven’t built any tech´s before. Hehe so plz replay with easy words. There are some tutorials out there which are based on an old game controller and stuff. But I want to do my on an Arduino board with a USB connection or wireless connection. Here is a tricky part, I want it to fit a cube chassi that is around 7-10 centimeters, I haven’t done it yet so that’s why I put it to 7-10 cm because I have still time to make it bigger or smaller. I don’t know much about the wireless connection and battery to make these things. I know I’m sounding like someone that doesn’t have a clue about these things and it’s true, I want to learn it and make this controller. If someone can tell me more about this sort of project or tips me to a tutorial or something it would be excellent.

Posted by Blackanemone 8 years ago


is there a way to mod an original xbox with just a router, a pc, and ethernet cable?

See i have both an xbox 360 and an original xbox... i want to be able to stream files from my pc to my original xbox like i do with my 360 (using a program called TVersity)... my xbox has never been opened or tampered so therefore no mod obviously... i dont trust myself with technology and i dont want to ruin the xbox in anyway... i got rid of all games for my xbox and have neer been able to find an action replay so thats out of the question... an i dont have a credit card so i cant just get one from ebay.. i dont know any modders personally... basically if someone can please tell me at least how to get my pc to even acknowledge that the original xbox is in the network that would be the biggest help

Asked by Bumpy Nuggz 8 years ago


Electic circuit request

I am looking for help in designing/building a specific circuit that will perform the folowing: I want to to be able to load a sound file from a flash dive into a device that will play it through an output that can be connected to an amplifier and played through a speaker. So the specifics that I'd like: 1. The device would  have a usb receptical that would accept a flash drive loaded with a .wav file. Typical file would be about 30-60sec long. 2. The device would have a momentary contact button that would play the file on demand. While holding the button, the file would play. Releasing the button would reset the file back to the beginning so pushing the button again would replay the file from the beginning. 3. The device would have a 1/8" or 1/4" plug output that could be connected to an external amplifier to play the file over speakers. 4. Device would run off of 12v dc power I know this is simple but not sure the best and cheapest way to build. Wondering if a 555 timer or an Arduino would work for this. Any help greatly appreciated!

Posted by sfhc2181 3 years ago


Pokesav Codes

Hey PKMN Fans im making Pokesav codes for pokemon Diamond and pearl and wanted to now If any one wanted some codes. All you have to do is make sure you have a DS action replay and Either diamond or pearl then tell me all the characteristics you want your pokemon to have. Then I will make it then post the code in the comments for you and others to use. These codes will not work for the GBA games. Here is the code for my ultimate Rayquaza. Diamond: 94000130 FCFF0000 B21C4D28 00000000 B0000004 00000000 E0000304 000000EC 53332F06 3D060000 39DECAD6 8E8EEBFB 5A75143F 27060332 B3A20E5A 518B6AF6 9C01C887 C49482B9 E9675111 B1E6F764 BD7D0CC0 2E4CDDB8 AB511D8E E9CF6DAF 721BF23A 5B20D6EB 85D77B29 485D4BE9 CF072415 C79DC84A 66728577 F0CB878C 10F579FB 071844B7 E8279DEF 7B2D55A8 5DEEA3E6 25C69A8E 5BE816A2 C4EDBB6F F5ABA2A1 978C187B 2192E9C3 C969B273 8C5FD893 2A7F45A5 FC9A788D 5E95FF0F F6947A37 723FCA58 AC83F121 570FDBFC F5865A15 68BE28F2 F7B312DB 60097FA1 0E5EDF8B BEB4D16F 7FBD203F F7D28197 E8CFAE0A D842CD40 837A9328 F37CA0CA AAF31276 188D6E6A 4262B224 00000000 D2000000 00000000 Pearl: 94000130 FCFF0000 B21C4D28 00000000 B0000004 00000000 E0000304 000000EC 53332F06 3D060000 39DECAD6 8E8EEBFB 5A75143F 27060332 B3A20E5A 518B6AF6 9C01C887 C49482B9 E9675111 B1E6F764 BD7D0CC0 2E4CDDB8 AB511D8E E9CF6DAF 721BF23A 5B20D6EB 85D77B29 485D4BE9 CF072415 C79DC84A 66728577 F0CB878C 10F579FB 071844B7 E8279DEF 7B2D55A8 5DEEA3E6 25C69A8E 5BE816A2 C4EDBB6F F5ABA2A1 978C187B 2192E9C3 C969B273 8C5FD893 2A7F45A5 FC9A788D 5E95FF0F F6947A37 723FCA58 AC83F121 570FDBFC F5865A15 68BE28F2 F7B312DB 60097FA1 0E5EDF8B BEB4D16F 7FBD203F F7D28197 E8CFAE0A D842CD40 837A9328 F37CA0CA AAF31276 188D6E6A 4262B224 00000000 D2000000 00000000

Posted by GTRPLR1995 9 years ago


hex? Answered

 please give me the hex file for this this is urrgent and if do this i follow you  i get a error when i compile it /*   Experiment No. 7: Playing Happy Birthday Tune with PIC12F683   Compile with MikroC Pro for PIC   Internal clock @ 4.0 MHz, MCLR disabled, PWRT OFF */ void Delay_100(){  Delay_ms(100); } void main() { CMCON0 = 7; TRISIO = 0b00001000; // GP5, 5 I/P's, Rest O/P's GPIO = 0; Sound_Init(&GPIO,2); // Initialize sound o/p pin do {    Sound_Play(262, 400); // Hap    Delay_100();    Sound_Play(262, 400); // Py    Delay_100();    Sound_Play(294, 800); // Birth    Delay_100();    Sound_Play(262, 800); // Day    Delay_100();    Sound_Play(349, 800); // To    Delay_100();    Sound_Play(330, 1000); // You    Delay_100();    Delay_100();    // Another Para    Sound_Play(262, 400); // Hap    Delay_100();    Sound_Play(262, 400); // Py    Delay_100();    Sound_Play(294, 800); // Birth    Delay_100();    Sound_Play(262, 800); // Day    Delay_100();    Sound_Play(392, 800); // To    Delay_100();    Sound_Play(349, 1000); // You    Delay_100();    Delay_100();    // Another Para    Sound_Play(262, 400); // Hap    Delay_100();    Sound_Play(262, 400); // Py    Delay_100();    Sound_Play(523, 700); // Birth    Delay_100();    Sound_Play(440, 800); // Day    Delay_100();    Sound_Play(349, 800); // Dear    Delay_100();    Sound_Play(330, 800); // XX    Delay_100();    Sound_Play(294, 700); // XX    Delay_100();    Sound_Play(466, 400); // Hap    Delay_100();    Sound_Play(466, 400); // Py    Delay_100();    Sound_Play(440, 700); // Birth    Delay_100();    Sound_Play(349, 800); // Day    Delay_100();    Sound_Play(392, 800); // To    Delay_100();    Sound_Play(349, 1600); // You $ $ $    Delay_ms(1000); // Wait for 1 sec and replay    }while(1); }

Asked by robot1398 6 years ago


unfinished,5 DOF Robotic Mechanical ARM

5 DOF Robotic Mechanical ARM Required Material of project:- 1. Basic Servo Tower pro 9g*4 2. Header pins Male female*2 3. Arduino Nano*1 4.10kΩ Resistor resistance*2 5. Trimmer Potentiometer track Linear; maximum resistance 10kΩ*4 6. Tactile push button*2 7. Blank circuit board*1 8. Acrylic strips for Robot & potentiometer body*2 9. Wires, Button, Switch 10.Balsa wood, Metal, Plastic Procedure:- Arrange all necessary items.. Please go through the attached images  for better understanding.. I divide whole project in two parts 1) Servo Motor assembly 2) Potentiometer assembly 1) Servo motor assembly: – Servo motor as J1, J2, J3, J4 fix the servo motors as shown in image use 3M tape to glue servo, use thin flexible plastic strip to make griper, make hole in center of each finger tie thread in that hole pass this thread from center hole and tie knot at the other end of thread with 4th servo motor’s knob, as you stretch thread finger get close vise versa. Fix whole arrangement on strong rigid base. 2) Potentiometer assembly: – Fix potentiometer as shown in figure name potentiometer as do previous R3, R4, R5, R6 this time place R6 separately for easy access this potentiometer control gripper to pick and place. Potentiometer arrangement symmetry must be same as servo arm. Fix whole arrangement on strong rigid base. Moving a little bolt from one side to the other side:- 1. Actuators / output devices: 4 micro servos 2. Control method: controlled by a PIC16F690       assembler firmware 3. CPU: PIC16f690 micro controller 4. Operating system: self made assembler code 5. Power source: 4.8V to 6V from 4 battery cells 6. Programming language: PIC Assembler 7. Sensors / input devices: teach in system with                         4 potentiometers       Making Processer:- The Potis are standard types and are screwed to the white plastic parts with their nuts. The axles are pressed into the transparent plastic part. The handle to move the teach-in-arm is a M3-Spacer and the socket is a plastic part with is normally used to fix balloons on a stick to hold it.                     move the motor itself by hand a little force is needed due to its permanent magnets, which create a small holding force. But inside the servo a lot of gears increase the force which you have to apply. If you move the servo by hand, you have to apply a much higher force. If you overcome the motors holding force, it starts to rotate an acts as a flywheel. So moving a servo by hand needs a high torque and its not easy to turn it to the position where you want it. ( Fan control modules for engine cooling of real cars have some extra parts to clamp the voltage which is generated, when you drive at higher speeds. In that case the fan works like a windmill and creates higher voltages than normal inside the power stage of the module.) And there were also a lot of other "problems" which had to be solved using my PIC Controllers. i.e. self made electronics for a RC-Excavator which works similar to the digital system used in slot cars. To replace a lot of wires between the rotating part of the excavator and the track unit, a small PIC 12F629 reads the pulses from up to 5 channels of a RC-Receiver and leads their information via a 2 wire connection to a second PIC12F629. At the second board the power is separated from the data. The PIC is reading the data, and generates the PWM output for the 5 Servo output connector. the 2 wire connection is made with a cheap 6,3mm mono microphone plug which is also used as the axle for the rotating part. The arm of the excavator is also powered by standard servos and so it was necessary to change the control behavior from proportional to integral so that the servos move like real hydraulic cylinders which are controlled by valves. I used the same 12F629 type for that job and added some features like adjustable limit positions and starting point programmable by one jumper, and automatic return to park position when missing the pulses for some seconds. The Software is simple:- Its working like a servotester for four axis. That means, every poti is connected to an analog in of the controller and all servos are connected to GPIOs. The controller reads each poti, does some scaling, so that the angle of the poti equals to the angle of the axis and finally he creates the PWM output 1-2ms pulse every 20ms for all servos. Teach mode:- After a reset the robot arm follows the teach in arm while simple mapping the analog inputs every 25ms to the servo motors. Pressing the button stores each servo position in a array. Play mode: The sketch reads the array step by step and moves the robot arm. For cool looking movements I added a routine calculates different micro steps for each servo to have moving start and end sync on all axis. Also added a ramp for soft increase/decrease velocity. Shorter travel distances the robot does slow, longer distances with faster speed.           The program moves the servos at full speed to the next position and a short delay time after each command allows all of the servos to reach their final position. That means that it is possible to increase the speed a little bit more by doing some fine tuning of the delay times after each command. The final thing which is still not implemented is the routine which saves the "Teach In" data 5 or 10 times per second, so that the controller is able to replay it in a loop with the original speed or with a lower or higher speed. Electrical Connection:- Provide separate power supply (5V DC 1amps) to the Servo motors . Don’t forget to short ground of both power source ( arduino + servo) 5 DOF Robotic Mechanical ARM :- 1. Use of Fiber on upper side 2. wooden spoon is a part of side body 3. cable tie *12 pieces use the robotic. 4. Some pices of wires 5. use scraw*4 6. Glue 7. some small clips Because to attached body 8. small size of plastic box 9. One pieces of  square fiber stand and one pieces small & medium  circular fiber  10.  L293D Motor Driver IC+IC Base KG143 11. Generic Elementz High Quality Nickel Plated 24*18 Points Bread Board*(2 pieces) and one plastic 12. Push Button Switch. Play Mode version 1.1 The gripper input is used to set the delay (0,1,3,15,60,300 seconds) after a loop is done. The switch (it was left from the project start) pauses the robot.        Thanks you:

Posted by aarif1234 9 months ago