Schematic Symbol

In this schematic, http://www.musicfromouterspace.com/analogsynth_new/WSG2010/schematicpg1.gif At the top middle there is a symbol "ODD" that is enclosed in a circle. Can anyone tell me what that is? Im assuming it is the audio jack, but i may be wrong, Thanks

Topic by Grizzly_Bear 5 years ago  |  last reply 5 years ago


Symbols Chart

Is there a chart that describes what all the symbols stand for example, in the screen shot there is a yellow badge on the lower right.

Topic by WWC 6 years ago  |  last reply 6 years ago


Schematic symbols?

I found this schematic in a 1947 manual on vacuum systems and I cant translate the indicated DPDT switch into something I understand. Can anyone sketch a quick pinout for it, preferably indicating what goes where on the schematic. This goes along with my other pirani gauge question.

Question by The Ideanator 7 years ago  |  last reply 7 years ago


What is this circuit symbol? Answered

I'm wondering what Q22 is, I have never seen that before.

Question by T_T_ 7 years ago  |  last reply 7 years ago


Safety symbols for instructables

Hey guys! Just an idea; In the symbols section when writing an instructable, if we had a symbol for; Goggles, Ear Defenders and Dust Masks it could be useful to add to each step as simple safety advice. Anyway....     Just an idea :)

Topic by Toms Workshop 5 years ago  |  last reply 5 years ago


symbols appearing as boxes

Hello , when i post the symbol for ohms (Ω) it brings up a box as you can see, i dont suppose there is anyway around this

Topic by Cew27 10 years ago  |  last reply 10 years ago


Symbols Configuration for PCB Libraries

Hi everyone !, I would like to know what kind of symbol configuration most of engineers or pcb designers use or what standards follow to create the symbols.I found some recommendations and i have two examples of symbol configurations , In the "Image #1" i created the symbol placing inputs and pasive pins on left side and outputs on the right side and in the "Image #2" i followed the symbol configuration of the typical application of the datasheet.Which of the two configurations is preferred or recommended to use and why?Thank you.

Question by Juan DavidD3 5 months ago  |  last reply 5 months ago


Symbols in Word 2003 and up? Answered

Used to have word '2000'. It was easy to allocate symbols, like 'degree', (small circle in uppercase). I used to allocate D for this symbol. Now I have a newer version (2003, really HATED the Word 'Vista' version...)!  But it seems hard to allocate any shortcuts for symbols now... People, please tell me how to do it..., otherwise I will delete it (again...). The 2003 Office Suite, to be replaced by the decade old ' Office' version??? Please don't tell me the buggy old 'open office' is better... Just put it on your USB stick...

Question by BobS 8 years ago  |  last reply 8 years ago


What is this wiring diagram symbol? Answered

It's part of the power supply circuit and probably has something to do with the wall wart power supply, but I'm not confident enough in that explanation to move ahead with it.

Question by applesnacks 8 years ago  |  last reply 8 years ago


Would someone identify the symbols/pictograms in the attached image? Answered

I found this on the wall by the bar in a UK pub. It looks old, I don't know what it means, but I thought this would get me an answer. It looks like fret-sawn perspex, could be a school project perhaps. L

Question by lemonie 8 years ago  |  last reply 7 years ago


How do I put labels in a front panel?

I have made a multiconnections box for my computer that fits in a 5-1/4 bay. It has four USB ports, 1 Firewire, mic and earphones and several card readers. The front panel of the box is made of plastic and painted with spray paint to cover putty patches. I want to put logos for every connector, the USB logo, the Firewire logo, a logo of a mic, a logo of an earphone and the identification of each card slot (CF, SD, MS, etc) What are the ways of doing it with a factory-like finish? ¿custom decals? ¿Screen prints? ¿Is there any instructable about the matter?

Topic by jedikalimero 8 years ago


what is the best way to put an image on a blank guitar pick?

I have a white guitar pick and i would like to put a symbol on it, I'm a huge fan of Assassins Creed and i would like to put the assassins symbol on it, i was wondering what the best way to do that would be. Also if someone knows of a site or something that has things relating to assassins creed i would love to know, thanks in advance.

Question by coldpsyco91 8 years ago  |  last reply 8 years ago


What math process is indicated by a symbol of an integral with a circle drawn at near the center of the integral symbol? Answered

I believe that this is has something to do with physics, possibly calculations pertaining to WORK. I know what an integral is but I am not sure what this is telling me to do. Derive an integral in some fashion other than standard? As I said above the symbol is a standard integral symbol from calculus except there is a circle at the center of the symbol.

Question by jc38654 10 years ago  |  last reply 10 years ago


Strange symbols appearing in my tutorial text

Whenever I try to copy numbers with fractions or the inches mark some weird A letters and other symbols are added. When I switch between edit and preview, another set are added. How do I solve this problem? I am using a Mac.

Topic by Aly 11 years ago  |  last reply 11 years ago


What do these symbols mean on the music staff? Answered

I am wondering what the five flat signs mean, I think it means b-flat minor, but i don't know what to do. Gratias agimus tibi, josh1324

Question by josh1324 7 years ago  |  last reply 7 years ago


Symbol CS1504 Keychain Barcode Memory Scanner

A couple of years ago at work I purchased this little keyring barcode reader http://www.symbol.com/product.php?productID=204 It's a great little thing. It comes with no software so I paid to download some reading software (don't know what I did with it) which had fairly limited functionality it would show me the date and time of reading, the type of barcode format and the barcode number. What I really want to do with this now is use it for asset checking. I want to put a barcode on every door in my building and an asset number barcode on every asset. That way when the yearly audit comes round I can nip from room to room and scan the door and then all the assets. Come back to a PC and download - Room ID, Asset ID and a date and time stamp. But what I really want this to do is to just pull the description data associated with the asset number from so sort of table. The developer software is freely available... but I don't want to learn Pearl or any other language just for this... If someone made a little open source app... I'd pay for it (as long as it was like the budgy) If you could compile a little app for the Symbol how cool it would be! 

Topic by ChickenGrylls 9 years ago  |  last reply 5 years ago


+ symbol can't be used in image mouse over text.

+ symbol can't be used in image mouse over text. It will not save. XPSP3 FF26

Topic by Divet 5 years ago  |  last reply 5 years ago


How can I put symbols or math formulas in the answer box? Answered

I was trying to answer a question earlier and wanted to put in the formula for figuring the surface area of a sphere.  Short of adding an image, I couldn't figure out how, so I just wrote out the formula. Is there a way to insert math symbols in the answer box?

Question by Burf 9 years ago  |  last reply 9 years ago


What do the symbols on the head of Japanese cartoon animation mean?

While watching some Japanese cartoons on TV, I always noticed that some symbols appear on the head of the characters. Sometimes a sweat drop appears when they are aggravated or embarrassed. Sometimes I have seen what looks like crosses, periods and other symbols and shapes. Since I am not familiar with Japanese culture, can someone explain me what these symbols mean? Thank you.

Topic by blkhawk 7 years ago  |  last reply 7 years ago


Schematic Building Aplication For My Computer

Okay so making schematics is a pain so I was wondering if there are any applications that you can make a schematic with? For instance I could put in a resistor symbol, capacitor symbol, transformer symbol or a speaker symbol ETC ETC and then put in wire and add numbers to identify components and then print it? Are there any applications like that?

Topic by jackillac92 10 years ago  |  last reply 10 years ago


How do you make the little heart symbol?

I have been wanting to make the little black heart when I am typing but can't figure out how! Please help!

Question by happyjo 8 years ago  |  last reply 7 years ago


How / Where do I plug in the yellow symbol for drums in guitar hero?

Might seem like a silly question but I just got my ps2 back and world tour. Tried to set up the drums, I could see where the orange symbol went and the foot pedal but for the life of me cannot find a place to plug in the yellow symbol. Could some one please get back to me so I can rock on. Thanx...

Question by lillex1981 9 years ago  |  last reply 9 years ago


Trying to find out what kind of bayonet this is

It has a symbol with WG underneath on the sheath and TT679 or 3 also on the sheath. Then on the bayonet it has FF197 ans also some kind of symbol.

Question by MikeS738 1 year ago


Does any one know what this component is? - C521?

It is found in a variable temperature controlled soldering iron without feedback. It is about the size of an 1/8w resistor. The marking on the side says C53 or C531 (it's a bit smudged). The component symbol looks a bit like the pic below.

Question by Electronics111 9 years ago  |  last reply 9 years ago


How do you use special characters in cmd?

I'm looking for the arrow (or triangle) symbols to put into a batch program. I know the alt # codes, but I want the codes compatible with ANSI. I have the down arrow, but it's an invisible symbol. Anyone know how to get them? (ASCII numbers are 16, 17, 30, and 31) Thanks!

Question by race.freak 6 years ago  |  last reply 6 years ago


900 leaf symbol 900 silver pin where is this from?

Silver pin of some sorts not sure where this was from or what the hallmark means or how much it would be worth cant find any information on it any would be great

Question by kmurphy22 5 years ago  |  last reply 5 years ago


fake PRO name?

I'm just wondering if anyone has figured out the code to put a PRO symbol to the left of your name, if you have please tell me

Question by GnomeMaster 9 years ago  |  last reply 9 years ago


Animated preloader in Flash Answered

How would I make a preloader with a symbol that moves from left, rather than having a rectangle scaling? Or would it work the same? I don't want the symbol to warp at all when it's moving. I am using Actionscript 2.0, with Flash CS4

Question by St Jimmy 8 years ago  |  last reply 8 years ago


Help... Anyone know how to translate this song into music symbols on a staff?

Can anyone translate this song into music symbols on a staff. or point me to where or how to do this. the song is : ANOINTING FALL ON ME I looked for it but this is all I found without music symbols. if you can put it into music symbols on a staff I will really appreciate it. thanks I provided an screen shot of the music because the text on the song I wrote here moved after posting it so it's off) ANOINTING FALL ON ME ...C.....Am7.....Dm7....G7 ANOINTING FALL ON ME ..Em.....Am7....Dm7.....G7 ANOINTING FALL ON ME .....C7 LET THE POWER OF THE ........F............Fm6 HOLY GHOST FALL ON ME ...C........G7..........C ANOINTING FALL ON ME -- ..............C....... Am7 TOUCH MY HANDS LORD ....Dm7............G7 MY MOUTH AND MY HEART ...........Em.....Am7...Dm7.....G7 FILL MY LIFE LORD EVERY PART ...........C LET THE POWER OF THE ...............F..........Fm6 HOLY GHOST FALL ON ME ...C.........G7........C ANOINTING FALL ON ME

Question by PitStoP 9 years ago  |  last reply 9 years ago


Printing jibberish

When i print half will be in english and the other half will be in symbols and letters. what is going on?

Topic by dneill 9 years ago


Wall wart for digital camera

Hi everyone, I have a cheapo digital camera, a Norcent DC-1020. I've been trying so hard to figure out what kind of wall wart I need for it. It's rated at 3.3V and 2A, but here's what's confusing me, at the input it says "DCIN3.3V," which makes me think it needs a DC wall wart, but the sticker on the bottom says "3.3V [symbol] 2.0A max" where the symbol is two lines, one solid, one dashed. I thought that symbol was for AC?

Topic by burger_bot 5 years ago  |  last reply 5 years ago


Firefox add-on for Chinese?

Arrgh! I want to do mah extra-credit math project, but mah browser is making it hard to read any Chinese!!! (It all comes out as weird symbols- see the screenshot) Is there a FF3 add-on to fix my problem? Or is it something else I need to download?

Topic by watermelonhead 9 years ago  |  last reply 9 years ago


Zombie Costume Question

I am working on a soldier zombie costume, but people keep telling me that I look like a nazi soldier. They have me worried that my costume will be in bad taste, but I am not so sure as there are no actual nazi symbols on my costume. Should I risk looking like a nazi or should I try to distance myself from that? If you think I should distance myself from that, how would you recommend doing that? Some have suggested that I embrace it and wear a red armband, but with a mocking symbol, like a smiley-face or a peace symbol, a sort of mild satire.

Question by RedRussian 9 years ago  |  last reply 9 years ago


Pan Tilt Face Detection

HI I'M GETTING THESE ERRORS IN VC++ 2010, HOW DO I RESOLVE THIS? 1>facedetect.obj : error LNK2019: unresolved external symbol "public: void __thiscall Tserial::disconnect(void)" (?disconnect@Tserial@@QAEXXZ) referenced in function _main 1>facedetect.obj : error LNK2019: unresolved external symbol "public: int __thiscall Tserial::connect(char *,int,enum serial_parity)" (?connect@Tserial@@QAEHPADHW4serial_parity@@@Z) referenced in function _main 1>facedetect.obj : error LNK2019: unresolved external symbol "public: __thiscall Tserial::Tserial(void)" (??0Tserial@@QAE@XZ) referenced in function _main 1>facedetect.obj : error LNK2019: unresolved external symbol "public: __thiscall Tserial::~Tserial(void)" (??1Tserial@@QAE@XZ) referenced in function "public: void * __thiscall Tserial::`scalar deleting destructor'(unsigned int)" (??_GTserial@@QAEPAXI@Z) 1>facedetect.obj : error LNK2019: unresolved external symbol "public: void __thiscall Tserial::sendChar(char)" (?sendChar@Tserial@@QAEXD@Z) referenced in function "void __cdecl detectAndDisplay(class cv::Mat)" (?detectAndDisplay@@YAXVMat@cv@@@Z) 1>c:\users\auvsi2014\documents\visual studio 2010\Projects\facedetect\Debug\facedetect.exe : fatal error LNK1120: 5 unresolved externals

Topic by dnarayanan93 4 years ago  |  last reply 4 years ago


How to make a Light up full head mask?

I have decided to try and make a mask and came up with a design but i do not know how to make one. the mask is featureless and only has eyeholes. there will be a stripe down the middle that has symbols on it. the part of the stripe that is oncovered by the symbols will light up white. i need to find a way to make it while the lights will not harm my eyes.

Question by mdiven 6 years ago  |  last reply 6 years ago


Quotes in Text

Why do some quotation symbols in the text of an Instructable sometimes display as the "&quot" HTML tag? I'm using Mac OS X and the font is Arial.

Topic by dlfuller 10 years ago  |  last reply 10 years ago


Striked out names...

OK, I've decided to ask: does it mean anything? Or is because the users included the text formatting symbols in their username? :-/

Topic by ll.13 11 years ago  |  last reply 10 years ago


Macintosh powerbook g3, on startup. Shows apple symbol then does the no entry sign ,

Power button wont turn it off command things dont seem to have any affect.? any ideas whats up with it apart from its unwell,  Thanks.

Question by crazyg 4 years ago


Winter Olympics and Instructables Robot ?

Does anyone see a resemblance between the Vancouver Olympics symbol (Inuit trail cairn) and the Instructables Robot?  Just curious.

Question by paganwonder 9 years ago  |  last reply 9 years ago


Why won't the instructable editor save my image notes?

 It says "saving" and the little symbol keeps spinning but it never finishes.

Question by Mark Rehorst 8 years ago  |  last reply 8 years ago


HELP! I need to understand this schematic. Can someone translate the different symbols? I do understand positive/ground.

Http://www.razorconcepts.net/phototransistor.html

Question by ElectroFlex 6 years ago  |  last reply 6 years ago


Links no longer supported in comments and topics?

With the recent works on the website came some new features I fail to fully understand. Tried to get a link into one of my comments. You know, highlight the text in question and then paste the link after clicking on the link symbol that appears. Well, I get all sorts of italic happening, can blow the text to a bigger size but the link symbol only gives me italic. Did someone mess it up without noticing? ;)

Topic by Downunder35m 1 year ago  |  last reply 1 year ago


how to use tinycad software?

I downloaded the free tinycad schematic software but i dont know how to use it, what is the symbol for a picaxe 08m?

Question by thecookiemonster 9 years ago  |  last reply 9 years ago


can someone explain this for me?

In the picture of the schematic there is + symbols and i dont know where to connect them, specifically the 10M ohm one, can you lend a hand?

Topic by Yerboogieman 10 years ago  |  last reply 10 years ago


What is this electronic component?

During one of my part harvests I came across a rather odd component. It looked like a black rectangle with steel pegs protruding from one of its sides. The part's etchings are a white dotted line followed by what appears to be a mitsubishi symbol followed by the text "E 27k", an ohm symbol, then " 9428". I found this part on the board of what I believe to have been part of a tape recording machine. Attached is a picture of the component. If anyone can identify the part I would be eternally grateful.

Topic by fdsafdsaqwrewqrbsafdsagrgew 6 years ago  |  last reply 6 years ago


How to make a silicone keyboard cover?

I'm looking for an easy step-by-step tutorial of how to make a silicone laptop keyboard cover with customs symbols on it.

Question by Afrocalypse 7 years ago


the little cord that connects to the yellow cymbol on the drums of guitar hero world tour ripped off how can i fix it?

It was the little cord that connects to a little plug and the plug connects to the symbol

Question by 9 years ago  |  last reply 9 years ago


What is the difference between Vcc- and ground?

What is the difference between Vcc- and the ground symbol on this schematic? Or are they the same thing? I've just never encountered this before.

Question by mbudde 8 years ago  |  last reply 6 years ago



Can any one please do me a favor by converting this schematic into PCB design

As i don't know how to make a PCB design. So please help me out.? and the the software i used to make the schematic didn't had a photocell symbol so used an LED symbol and also the relay i used is the simple 12V relay. I would be glad if someone really help me out on this one. and if one does please send its layout to my email: abdullahazam.747@gmail.com THANKS

Question by pizzadox747 7 years ago  |  last reply 7 years ago