My tire swing tire Answered

I found an old tire in my pasture by my house. I decided to make a rope swing out of it, the only problem is the old, rusty rim is still on it! How do I get it off??

Question by General Eggs 9 years ago  |  last reply 9 years ago


Tire Tee

I want to make a tire tee for my softball-loving daughter. I saw the one in the link below and thought it would be an easy (and cheap) DIY. http://i44.tinypic.com/9tzol5.gif I'd want it to be portable, as her team is talking about practicing inside a school gym when it gets cold and this would be an excellent tool for hitting inside. My thought was to fill a bucket with concrete and stick the pole in it which would be my base. It looks like there's some PVC slipped over the pole with a pin/screw/bolt holding it at the height. If I want to get really fancy, I can drill multiple holes and adjust the height for each girl. The weight of the tire should provide enough resistance on its own. I want to limit any extra resistance from the tee as much as possible. The question I have is about the pivoting tire. What's the best way to set that up? I could have two pieces of PVC connected by a coupler and the tire would rest on the coupler. Or I could secure the the tire to the PVC in some way and when the batter hits it, the tire AND PVC rotates around the base pole. Any suggestions about this? I appreciate any insight! Thanks!

Topic by gharper1 4 years ago  |  last reply 4 years ago


ATV Tires

I am in the market to buy some new tires for my warrior. I was thinking about buying some ITB mud lites. Does any one know of any good ATV tires currently on the market?

Topic by 2001warrior 10 years ago  |  last reply 6 years ago


im tired

Tell me if anyone else feels like this I AM TIRED OF ALL THE 1 VIDEO INSTRUCTABLES man it makes me pissed off when all i see is a video yes i know it is easier but i quote "There is no rush to publish an instructable so do your best." -ewillhelm (i think) you know it might be easier to make a video but if your going to make a video please take 5 seconds to take some pictures maybe put something else in like words because for those fast readers who dont want to watching something they could read faster than a movie 1 pyro-

Topic by ich bin ein pyro 11 years ago  |  last reply 11 years ago


repair a tire pump? Answered

Hand pump offers little to no resistance when pumping. loss of seal inside the pump cylinder.

Question by 10 years ago  |  last reply 10 years ago


LED bike tires

We've seen all sorts of ways to light up your bike. Here on Instructables people have used LEDs, cold cathode lights, and even fire. Now a company called Cyglo is making new tires that light up with LEDs. They are powered by the spinning of the wheel. When the wheel isn't spinning you can see the individual LEDs. They blur together when the bike is moving for a persistence of vision effect. They're not on sale yet, but hopefully soon. And then there will be one more way to be brilliant while riding at night. Cyglo Night Bright Tyres turn on the magic of colored light

Topic by fungus amungus 8 years ago  |  last reply 8 years ago


How to melt tires?

Hi! Could anyone tell me what do I need to do in order to melt old tires and pour the liquid in a mould?

Question by 9 years ago  |  last reply 7 years ago


foam filling a tire

Diy for foam filling a small lawn mower, hand truck tire.

Topic by blasterboy 11 years ago  |  last reply 10 years ago


Tired of this thing in the chatroom

Why do I keep having this error! I haven't been in the chat room myself for a while now Apparently others can still get on I know there really isn't much instructables can do I checked meebo and nothing the closest is that the group is made private and I know that's not true

Topic by Chicken2209 10 years ago  |  last reply 10 years ago


Oh So Tired...

Ach. Wouldn't you know it? I finally start a group that seems to be taking off, and I've come down with something nasty. I've been coughing for two weeks, but I've developed some pretty horrid symptoms that only go away when I'm lying down. I'd appreciate it if you guys livened up the group while I'm out by inviting some more furry friends to join it. Thanks, Kataze (Bleach refrencer extrordinaire!)

Topic by Kataze 11 years ago  |  last reply 11 years ago


what is rolling resistance in tire?

Question by thomasraja 10 years ago  |  last reply 10 years ago


which are better tires, hankook or toyo?

Question by ryo34 9 years ago  |  last reply 9 years ago


How to make a special shape tire? Answered

I want to make a tire in a elliptical shape. How can I do it? Is it possible to convert an ordinary tire into an elliptical one? Many Thanks

Question by youngken 10 years ago  |  last reply 10 years ago


how do you smooth a rubber tire?

Question by JimG113 2 years ago  |  last reply 2 years ago


LED EMBEDDED IN AUTO-TIRES? How to build this tire? Answered

People have been asking me to create a “ LED TIRE ” and I’ve never really even considered doing it, but I’m thinking of putting together a prototype of TIRE embedded with a lot of LEDS. What do you say, dear readers about this wacky idea? * Would you like to test this type of rubber on the streets? * Do you think would look cool a car with such tires? If you’re interested, about this idea let me know. Meanwhile I try to make a real LED rubber and I will post pictures of it soon. * Does anyone have any idea how I might build such a rubber? Thanks in advance for any idea. I get an insights IDEA about HOW TO DO IT ? Yes, LEDs in tires, literally. - In terms of safety that I thought so: 1. I take a normal summer or winter rubber, and in this rubber insertions or ribs, I do small holes from place to place where this LEDs get inserted. 2 These LEDs are connected to a source of 4 batteries that will be attached to all the assembly of wires and connections inside the tire. 3. I closed all the little holes and the whole assembly of wires and battery inside against detachment and ensure tightness with special adhesive for rubber. And I solved the problem of safety..  . : ) I think so.. So opinions or any idea about to do that?

Question by VitoM 4 years ago  |  last reply 4 years ago


Wanted: Bicycle wheels w/ rims

I need bicycle tire for a fishing rod holder that i would like to sell (like the one below but without the pvc)

Topic by OutdoorManiac 6 years ago  |  last reply 6 years ago


Why are bike tires higher PSI than car tires? Answered

.

Question by Yerboogieman 9 years ago  |  last reply 2 years ago


Bike Tire Valve Lights

Anyone know how to build a Bike Tire Valve Light? The ones in stores strobe, waterproof, and only activate during movement. Thanks

Topic by kmurray24 10 years ago  |  last reply 10 years ago


What will dye bike tires?

I tried asking this before, but it never appeared. I want to put brightly colored tires on my bike, but they're expensive, so I'm looking for some kind of product which will dye my black tires. Paint will wear off quickly, so I need something which actually penetrates the rubber. I'm thinking vinyl dye could work but I'm not sure.

Question by kramerr 9 years ago  |  last reply 9 years ago


custom made tire cover

Last summer I bought my '07 Jeep Wrangler. The previous owner had added some stickers and a spare tire cover to make it look like he had the "Call of Duty" package. That's not my cup of tea, so I took that stuff off. I would like to add my own design to the spare tire cover. I actually have the design ready to go on Photoshop. I though maybe I could take it to a place like Staples, have it printed as a vinyl sign, and then use a strong adhesive to glue it to the old cover, on top of the Call of Duty stuff. I imagine, though, that there are probably some adjustments to this whole plan that would help things turn out better. Any advice?

Topic by Purple Chez 4 years ago  |  last reply 3 years ago


some projects for old tires,

Could someone come up with some things to use old tires for? I have loads of them.

Question by mrshawklady 9 years ago  |  last reply 9 years ago


Feel tired advices please!

I always feel tired, I don't know why? I feel it’s a great place to put up my problem. Can you give me some advices. Thank you!

Topic by dawson 12 years ago  |  last reply 12 years ago


Old tire rocking chair

Found randomly on Flickr:http://www.flickr.com/photos/donshall/3340181328/http://www.flickr.com/photos/donshall/3340184078/I just LOVE this! It looks like it ought not to be too difficult to make, if one has a junkyard to pull bits from.(The note on the chair's back says something about don't play on this as wasps have taken up residence.)

Topic by rachel 10 years ago  |  last reply 10 years ago


Airbag Jack to Change a Tire

I have seen one before and would like to have my own super strong airbag jack. I do not need airtank or air compressors to be considered. I have air addressed. Just need an easy solution to the problem. Here is one in Australia, I think http://s106.photobucket.com/user/kellypf/media/AirbagJack.jpg.html

Topic by Tolting 5 years ago  |  last reply 5 years ago


I am SO tired....

I am just SO tired of not being able to be who I am.  If I am kind to children, I become a molester, if I let my feelings go with free reign, am outlandish if I don't let my feelings out, I am unfeeling, if I speak the truth, I am a heratic if I hold on to fantasy, I am bonkers. If I talk about who I am, what I am, people don't want to hear it, and eventually deny it altogether; so I can NEVER be who I am around most people... (obviously "around" means in person). I can't win. Also,  Can ANYONE on line truly know me, in any real capacity ?   Can anyone have experienced the tremendous struggles I have with sensory overload?  Can any of you REALLY know how much I struggle day in and day out to not become cynical like the tv character HOUSE ?  I mean,  really ? 

Topic by Goodhart 7 years ago  |  last reply 6 years ago


DIY inductive heater? (For tire recycling.)

Hey all, I had an idea I wanted to try.  As you may know, recycling tires for projects isn't nearly as cool as it sounds. Since most street tires are steel-belted, about the only part you can even use is the sidewalls. :P My idea for getting the (much cooler) tread part off was to use an inductive heater to heat just the steel belting inside, then (hopefully) just yank the tread layer off with a ginormous pair of pliers. The problem is that actual inductive ranges are a $100+ for even a single burner unit.  Couple that with the very real possibility that my little experiment could damage it beyond repair... not exactly a recipe for success. So now my question: Does anybody have a schematic, instructions, and/or (please, please) instructible for how to build my own inductive heater? Thanks in advance, -me

Topic by PS118 7 years ago  |  last reply 7 years ago


What knex sets come with Large tires?

I have built a vehicle and now need large wheels to go with it? Can anyone name any sets with them. I only need two. Oh and bonus points if you tell me a store that sells it!

Question by Kurty66 9 years ago  |  last reply 9 years ago


how to inflate a bike tire with out a pump

Hello everybody, I have recently built a no weld rebumbant bike. And during the course have discovered that I do not own an bike pump. since I live in a extremely rural area borrowing is out of the question if some one could please help me I would greatly appreciate it. sincerely, fidgety

Topic by fidgety2 10 years ago  |  last reply 10 years ago


which position should I put with used and new winter tires? Answered

I've bought 2 new snow tires, the same model than the old ones. Should I put them both in front or in the back? I've got a Nissan Sentra 2004 (so, FF)

Question by le-Sid 9 years ago  |  last reply 9 years ago


Advice sought on hacking my Xootr kick scooter.

I love my Xootr Scooter. I'd probably love it even more if it didn't keep trying to kill me. I live in NYC and ride the scooter on both streets and sidewalks. The problem is that whenever the front wheel hits a sudden discontinuity greater than about half an inch, it flips, attempting to take me with it on a 360º journey that would no doubt end with my brains splattered on the pavement.  So far my reflexes have remained fast enough to leap off at the last microsecond; but I'm not getting any younger; which also means I would feel like a fool wearing a helmet to ride the same type of vehicle children so blithely scoot up and down the block on. Anyway: I've looked for inflatable tires that fit the scooter. They don't seem to exist. I've considered trying to add a suspension, but I don't weld and it's probably beyond my abilities anyway. My most recent idea is to use a drill to honeycomb the front tire with holes and then fill the holes with a 'bouncier' substance. (Sugru, perhaps?) Any suggestions, advice, or comments would be greatly appreciated.

Topic by joachimboaz 7 years ago  |  last reply 7 years ago


Schrader Valve use with liquid?

I am working on making a compressed liquid system and i need a valve that can take both a bike pump and have liquid put through it...Can a Schrader Valve take a liquid (clean) and then have the bike pump still attached after?

Question by trf 9 years ago  |  last reply 9 years ago


i need help fixing my bike, i just posted pictures

I was riding my bike doing stupid stuff, i tighted my bolts because my rim was loose i rode around and was just messin around some more and the axel and rim came part, started clanking, wobbling around alot and noticed it..pissed me off alot, was about a mile down the road and decided t ride it anyway, stuck in 6th gear, messed up wheel that makes it go slow do not work together, so i got it up as fast as i could and it was clanking, wobbling, and squeeking SO much...IM STILL PISSED OFF!!! Pictures soon.

Topic by Yerboogieman 10 years ago  |  last reply 10 years ago


How to build beach balloon tires?

What would be the best way to attach ~ detach a set of wheels to a boat ... to move across soft sand ?  .. weight capacity = 500 lbs How to build balloon sand tires thanx ~Frog~

Question by ~Frog~ 8 years ago  |  last reply 5 years ago


How to make Balloon Beach Tires

Has anyone made Sand tires for soft sand .. to move boat to the water ? .. weight capacity =500 lbs.

Topic by ~Frog~ 8 years ago  |  last reply 8 years ago


Has anyone used/made a Schrader-valve (tire stem) adapter for a Coleman mattress pump?

I'm getting too old (or out of shape) to use a manual tire pump on mine and my wife's bicycles. We own a Coleman air mattress with their wall-plug inflation pump. The latter comes with their custom "air lock" adapter for the mattress, and a "pinch valve" adapter.Before I go out and buy a compressor/electric pump for the bikes, I wanted to try using this one that I already own. Has aynone ever used this pump with a valve-stem adapter (Schrader valve) to inflate tires? If so, where did you get the adapter? Or did you make one?

Topic by kelseymh 9 years ago  |  last reply 9 years ago


Are you sick and tired of Windows Vista? Answered

Like I said I am frustrated with Windows Vista. I am to the point of formatting the whole drive and just run Linux on it. Windows Vista can't find updates. It is too slow. It freezes constantly. Never finds drivers for the hardware that I have. It asks for your permission for almost everything it does. I can't install the software that I want. Do they think that I am another gullible fool that it is going to run to upgrade to Windows 7? No way! What do you think?

Question by blkhawk 8 years ago  |  last reply 8 years ago


flat wheel barrow ? Answered

 Our "contractor" wheel barrow with inflatable tires commonly picks-up nails and goes flat. The semi hard sponge rubber replacement seems expensive and I have been wondering what might be homebuilt design. Latex caulk is cheap but don't think it would dry if trapped in a tire. Super ball material or similar would seem to be valuable.  

Question by nowj 9 years ago  |  last reply 4 years ago


Go Kart Inner Tube Size Answered

The inner tube on my go kart recently broke, and when I took it out of it's tire, I saw a large "3.50-4".  I also saw a small 78 on the opposite end of the tire, a "DDD" between the two previous mention marks, and a "D" by the valve. What do these markings mean and how can I find a correct replacement? Photos below picture the previously mentioned makings respectively.

Question by ___ 7 years ago  |  last reply 7 years ago


Custom spare wheel mount?

Just wondering if there is an article on building a custom mount for your spare tire, ours (under the truck) broke and we normally just lay it down in the back, but that can make storing other stuff harder, I'd like a article on how to make a custom mount. Thanks :)

Topic by CraigSnedeker 8 years ago  |  last reply 8 years ago


Can I get a 700x25 tire and tube and put it on a bike wheel that has a 700x38c tire and tube in it?

Can I get a 700x25 tire and tube and put it on a bike wheel that has a 700x38c tire and tube in it?

Topic by Bikeshoe 5 years ago  |  last reply 5 years ago


Can I get a 700x25 tire and tube and put it on a bike wheel that has a 700x38c tire and tube in it?

Can I get a 700x25 tire and tube and put it on a bike wheel that has a 700x38c tire and tube in it?

Question by Bikeshoe 5 years ago  |  last reply 5 years ago


What can you do with steel belted radial tires?

Question by DebR23 2 years ago  |  last reply 2 years ago


Has anyone built a tire pressure monitor reader?

In 2008 and later all autos sold in the usa must have a tire pressure monitor in each tire. Commercial devices to read the tire pressure and id from these tpms are very expensive. Has some clever electronics hobbiest built a device to read these tpms?

Question by hswaters 10 years ago


Is it possible to charge a car battery off of a moving car tire? Answered

Question by zleebme 9 years ago  |  last reply 9 years ago


Will a 700 x 28c-32c bike tube fit my 700 x 35c tire? Answered

I bought a spare tube with my new bike, and just noticed that it's not quite the right size, but I don't know a lot about bike tires. My tire says 700 x 35x My spare tube says 700 x 28x-32c Thanks

Question by Weissensteinburg 8 years ago  |  last reply 1 year ago


Does anyone know any tips for recycling tires at home.? ? Answered

I was   just curious if anyone  had   any tips for recycling tires  at  home on the farm? Also any  uses?  Seems such a   terrible  thing   on  te  enviroment with so many tires   and not   nthing to do wih them.

Question by andy1917 8 years ago  |  last reply 7 years ago


i am having truble beading the new tires? Answered

I tryed to inflate them but thay woun't bead  

Question by yo man 9 years ago  |  last reply 9 years ago


Como construir una silla con una rueda/How to build a chair with a tire

I found this interesting video of how to build a chair with a tire. Encontre este interesante video de como construir un asiento a partir de una rueda (llanta o neumatico)

Topic by blkhawk 5 years ago  |  last reply 5 years ago


HOW WOULD YOU MAKE A TIRE GASIFIER?

How would you make a gasifier to convert tires (a petroleum-based product) to fuel to run your car  (and of course you would put a wet scrubber on the exhaust to limit damage to the environment) just wondering if it was possible i put the wood gasifier picture there because thats how i understand it and want to know if the same concept is possible with tires if you look up "the colony" look up season one they make a wood gasifier and do a good job explaining it 

Question by bossmansam 8 years ago  |  last reply 7 years ago


Everytime i air up my tires they blow. Why?

Okay, when i air up my tires on my bike, the tire comes off the rim, the tube comes out and pops, even at 55-65 PSI exactly what they are supposed to be at. How do stop this? Please!! It is getting expensive!!

Question by Yerboogieman 9 years ago  |  last reply 9 years ago