I have 50 trampoline springs and i want to make like a bungie jump type thing any ideas, instructables????
Question by jimmerforpoy 8 years ago | last reply 8 years ago
I have a trampoline, and I can do a pretty good amount of tricks. And recently I was looking for a new trick to learn. I found one that I thought was cool, but I don't know the name. What it is, is a 180 aerial (no handed cartwheel). Most of the time when someone is performing it, they are transferring from trampoline to trampoline at an indoor trampoline arena. If you know what trick I am talking about please tell me.
Topic by SBDFFLS 5 years ago | last reply 5 years ago
I have an above-ground trampoline that I want to take the base off of and make it an in-ground trampoline. Is this possible?
Question by Dr. Pepper 8 years ago | last reply 8 years ago
I was given a trampoline and I want to put it together, how does one do this?
For our holiday party, Instructables and a few members of Potenco went trampolining at Sky High Sports. Sky High is essentially a couple of basketball-court-sized areas filled with trampolines. You bounce around like crazy, doing flips, playing dodge ball, and generally exhausting yourself. The potential for bodily injury is high, which for me, makes for an excellent holiday party. Afterward, we stuffed ourselves with Indian food.Today, the day after, everyone is nearly too sore to stand up straight.
Topic by ewilhelm 11 years ago | last reply 11 years ago
I had a broken trampoline that i couldn't afford to fix so now i have a pile of scrap metal and like 60 trampoline springs. I was wondering if anyone has any project ideas that i could use my pile of scrap for.
Question by Jacoben246 6 years ago | last reply 6 years ago
Dysprosium is almost finished and will be posted within 2 weeks. I am currently planning another ball machine named Bounce. It will be around 3 feet tall with 2 paths. The lift system going to be a chain lift. The first path will go onto a trampoline, bounce onto another, and another, than land in a basket. I don't know what the second path will be so please leave a comment with ideas. There aren't any pictures yet.
Topic by coolknexcreations 8 years ago | last reply 8 years ago
I would like one of these knex sets (these products must be shipped to holland): trampoline tower for less than 70 euro (this number includes shipment) hyperspace training tower for less than 70 euro (this number includes shipment) original knex coaster for less than 45 euro (this number includes shipment) I will give away: free subscribtion, 5* on all your ibles and a best answer if I get a good answer.
Question by Mr. Muggle 9 years ago | last reply 9 years ago
Well, this is a big disappointment. I'm looking for instructions for the 6ft ferris wheel and was directed to this site twice. Since we already own the Big Ball Factory, Trampoline Tower, Roller Coaster, Pinball Machine and various others, we have bins of Knex. I'm sure we have enough pieces to build the 6ft Ferris Wheel. Unfortunately, I must join this site to get instructions, however, they allow me to download my own instructions for free. How kind.. I can give them my instructions, but would have to purchase them back. My son is 20 and still looks forward to doing a "big build" - either legos or knex over the Christmas hoilday. It's been a tradition. Last year it was the Lego Tower Bridge. This year I was hoping to do Knex...
Topic by sharon4753 6 years ago | last reply 6 years ago
Ever since i was 12, i've wanted to live in a warehouse, 1000+ square feet. my plan would be to build an apartment (myself) on the inside, out or 2x4s, etc. I would build the inner house to code, insulate and heat it (so i wouldnt have to heat a million cubic feet), and just do all the stuff you can only do when you live in a warehouse. like ride a go-kart between your bedroom and kitchen, and have a trampoline in your living room. Now that i'm approaching the age of "hey, you're gonna be 23 soon, you'd better start thinking about a house", this is becoming more and more appealing to me. Anyone have any input on procedures, policies, zoning regulations, bills, etc? If (when) i do it, i'll most assuredly post an 'ible.
Topic by falcotheimpaler 10 years ago | last reply 5 years ago
But as long as I have been going to CNET's site, this is the FIRST time I have seen this: Instructables link from CNETMaker Faire: CNET visits the tech DIY show MEET YOUR MAKER.(4/21/2006; updated 4/28/2006)Are you a compulsive tech tinkerer, a closet MacGyver? Do you wish science fairs weren't just for students? Well, now there's an event for you: the first Maker Faire, where backyard inventors show off their projects and demonstrate how you can build them, too. CNET's on the scene, checking out the fashions, the music, the gadgets, the robots, the tech running on alternative energy--from steam to biodiesel to, yes, trampoline--and, of course, the homemade rockets... Turning a VCR into a cat feeder....Dinosaur sitings !
Topic by Goodhart 11 years ago | last reply 11 years ago
Thursday: AWESOME DAY!Thursday was just AWESOME! So basically, I learned how to use the Laser cutter today, and cut out THE FIRST INSTRUCTABLES BADGE EVER!(pic after post)After, I worked with Noah on Project X a whole little bit more, and we got it working, baby!I'm excited to see this thing go for real! But seriously, I can't tell you what it is, yet...Today was also the first day that I really got used to COREL draw, which enabled me to make most of the templates for everyone's badges, which I think are all pretty awesome. Everyone's got a customized "logo" and their username on the badge, which makes every Instructables badge original and personalized. Unfortunately, I didn't have time today to etch all of the badges, so that'l just have to wait until tomorrow.Later in the afternoon, Star asked me if I wanted to go sailing, to which I responded "What?" After I agreed to spontaneously go sailing with her and Tim, she brought me outside, where I learned that we were fixing up Tim's old outrigger canoe that he tried to sail to Cuba in. Tim, Star, and I were all working on the outrigger; lashing a makeshift trampoline on with bike innertubes... actually, most of the frame was held together with bike innertubes, including the rudder. Everyone was skeptical about us actually launching at all, assuming that we wouldn't launch in the dark of the night. Although, lucky for us, we were all "crazy" enough to launch in the dark. We geared up in fleeces, windbreakers, and life vests and hauled the outrigger out by hand (it was on castings), and launched it right next to Squid Labs. At first, Tim sailed us out of "port" (in the lagoon) and out into the Bay. It was spectacular. The moon, the stars, the SF skyline, it was all beautiful. Tim told us of his experiences on the outrigger while he was sailing back from almost Cuba, and proceeded to teach us more about boats in general. He then let Star take over the rudder and sail, while he lay down on the main hull. I was lying down on the makeshift trampoline, an old stretcher, by the way. We watched the stars over our heads, and, at first, the occasional passing of a brown pelican. Eventually, we came pretty close to "pelican island," a protected breeding ground for the brown pelican. Yet, the night was still young. We continued to listen to Tim speak about sailing, occasionally contributing to the conversation as well. It was all fascinating, not only what he told us, but the fact that the source of his knowledge was primarily himself. The other amusing part of the entire moonlit ride was the fact that Tim built the outrigger from essentially scratch, and most of it was lashed together with innertubes. Simply amazing. Eventually, I was given the opportunity to take control of the beautifully made outrigger canoe, and sailed us back from the bay, back into the lagoon, and back onto land. The whole trip was a once in a lifetime experience, although I hope I do get to go on a similar one soon enough. Thank you so much, Tim, for taking me out onto the bay, and thank you so much Star, for asking me if I wanted to go sailing in the first place. By the way, we got back to Squid at around 10:00, I believe, which was again, pretty late for a workday ;)I packed up my things and Tim/Star drove me home.That was pretty much it for that awesome day. Quite possibly the best day in the duration of this entire Internship.Cheers,-Muffinator
Topic by T3h_Muffinator 11 years ago | last reply 11 years ago
Here's an idea for the science fair: Bouncing liquids. Explain how it works and do something cool with it!http://www.nature.com/news/2007/070716/full/070716-17.htmlLiquids bounce againJumping jets move from the bathroom to the kitchen.After bouncing shampoo, physicists now bring you bouncing cooking oil. A team in Texas has found that the trampolining of a liquid jet falling onto a bath of the same liquid is more common than expected.Last year, a group in the Netherlands studied this bouncing effect for a jet of shampoo (see 'Puzzle of leaping liquid solved'). The bounce, which was first reported more than 40 years ago, happens because of the peculiar nature of shampoo, which gets thinner (less viscous) as it flows. A jet of it hitting a liquid surface is therefore lubricated by a thin layer at the interface, enabling it to bounce off rather than merge.But the liquids now studied by Matthew Thrasher and his colleagues at the University of Texas in Austin don't have this property. The silicone oils in their experiment are viscous but have 'normal' flow behaviour, like water.The researchers directed a jet of oil vertically onto the surface of a tank of the same oil. They found that the jet could undergo both a 'leaping' rebound and a bizarre 'flat' bounce in which it sprang horizontally across the liquid surface.The bounce here is due to a thin layer of air that separates the two liquid surfaces, the researchers say in an article submitted to Physical Review E.They point out that the effect can easily be recreated in a kitchen experiment with cooking oil. Just fill a glass pie dish with about 4 centimetres of oil and pour onto it a thin stream from a cup about 3 to 6 centimetres above the surface. While pouring, move the stream in a circle about once every 2 seconds (or perhaps less messily rotate the dish on a Lazy Susan). The bounce can be encouraged by passing a chopstick or some other small rod through the stream every now and then.
Topic by ewilhelm 11 years ago
On the 16th of October, team instructables decided to head over to Trapeze Arts for a day of fun and adventure! As a reward for our one millionth registered user, I was given the option to choose how we got to celebrate the occasion. After researching for a little while, a friend mentioned that she'd recently gone to a one day trapeze class. I looked into it, and it seemed like a fun idea. Several people brought cameras and a bunch of videos were taken. You can see photo's of the event below, sadly the video's haven't been cut together yet. Hopefully I'll be able to add that soon! ----- Well, I finally managed to get the videos all put together, I hope you enjoy! You can find them on our youtube channel. However, I'll just embed them here for ease of browsing! I figured it'd be nice to show off one complete run by everyone. Sadly we didn't get video of everyone getting caught, so I had to make do with what I had. Now a video of everyone's practice runs. We had to just practice swinging and getting our legs up and over the bar, then jumping back into the net. The guy who does the double flip out of the net at the end of the video is the instructor who's catching us in the following video. Then we all got a chance to get caught. this is another mashed up video of all of us on our runs to get caught by one of the instructors. Finally, after we finished the trapezing, we went to the equipment room to have some more fun. There were trampolines, tight rope (that was a couple feet of the ground), plate spinning, super yo-yo's, and a whole ton more. Again, we were all having fun, so video didn't get taken of everything, but I think this mash-up kind of shows off some of what we got to do. ...And that was our trip to Trapeze Arts! Everyone who worked there was great, and we had a blast! Thanks!
Topic by StumpChunkman 9 years ago | last reply 9 years ago