1142Views5Replies

Author Options:

Atari Punk Mods? Answered

Discussions

0
None
jeff-o

Best Answer 8 years ago

As in, the Atari Punk Console? I'd suggest playing around with the component values, or building multiple Consoles and mixing their outputs together, or using them to drive each other.

0
None
fretwreckef94jeff-o

Answer 8 years ago

Thank you for the ideas! but how would I link them together?

0
None
jeff-ofretwreckef94

Answer 8 years ago

Well, do a search for "mixer" here. That will show you how to mix multiple outputs together. As for one driving the next; consider this: Each of the control potentiometers simply varies the voltage going in to one portion of the chip. If, instead of a potentiometer there were another APC (whose output is a varying voltage), then you could have automatic control of that input! See what I'm getting at? ;)

0
None
fretwreckef94jeff-o

Answer 8 years ago

so would it work if I were to put the speaker output of one APC going into one of the potentiometers of another APC?

0
None
jeff-ofretwreckef94

Answer 8 years ago

Basically, yes. That's kinda what it's doing already; an astable oscillator is feeding a monostable oscillator. Now, the potentiometer for each half of the circuit is actually changing each half's RC time contant, so you can't just cut it out. But, you can hook up the output of one APC to, well, any pin on the next stage that isn't power or ground! Hook it all up on a breadboard and play around!