1249Views44Replies

Author Options:

"I Made It!" Madness! Answered

Anyone who posts a new "I Made It!" between today (March 13, 2018), and April 15, 2018 will be eligible to receive a new Instructables notebook and carpenter pencil.

For those new to the site, an "I Made It" is a special type of comment that you can post on an instructable to show that you followed the directions and made it yourself. You can find the big orange "I Made It!" link at the end of any instructable.

Post a picture of your brand new "I made it" in the comments below and also a link to the project where you have shared it. On April 16 we will be selecting 20 people at random who shared their "I Made It!" below to receive these gifts.

Discussions

0
None
randofo

5 months ago

Hello everybody!

It is great to see all of the cool new 'I Made Its' posted below! I'm sure all of the project authors were also thrilled to see you making their projects.

If you posted an "I made it" comment on someone else's Instructable and shared it below, keep an eye on your inbox for the gift claim form which should arrive over the next few days.

0
None
Matlekrandofo

Reply 4 months ago

Thanks a lot, I've received it! As @chienline said, no pencil inside... But a lot of cool stuff! And the notebook is great, with useful tools! Perfect to write down my next projects!

0
None
chienlinerandofo

Reply 4 months ago

I missed the pencils (T-T)

Instead, I got the cool notebook (with Useful measurement tools inside its cover), a large Robot sticker for my laptop (this is Awesome!), a Robot tattoo sticker (Cool!), and a diecast Robot pin for my backpack (Cooler!). Thank you Instructables. You are Awesome! (^_^) v

DSC_0382.JPG
0
None
Artuino

4 months ago

Thanks randofo and Intructables community!...just got my parcel today..

0
None
38ren

5 months ago

" It was harder then I thought, cutting out the Chinese characters, but a perfect gift for Father's day coming up, as my dad loves this beer :)

I ended up using pieces of plastic from an old folder instead of corrugated plastic (I couldn't find any) and put the light bulb in the back of the box, to even out the light distribution.

All in all, pretty satisfied with the result! (although you might notice that I had to sharpie some of the characters in lol, no sweat though. After all, this is a cheap material and I can do it all again.)"

"How to Make an Ambient Lamp From a Cardboard Box" by DaveFlynn

https://www.instructables.com/id/How-to-Make-an-Am...

IMG_20180415_120845_125.jpgIMG_20180415_001538_113.jpg
0
None
2016ume1165

5 months ago

I Made It !!!

I have a designed a robot named "BRObot" which is a perfect companion as a humanoid robot in house and office.This robot is designed keeping in mind the practical use and its feasibility. BROBOT can help in daily household chores such as cleaning,moping,objects handling etc.It has got a vacuum cleaner in front side. A sliding as well as rotating mop is present at bottom.It's neck has ball joint so as to enable the camera to cover whole area in its vision. It also serves perfectly for entertainment. It has got a T.V.,touch screen laptop and high quality speakers at its front. It has mobile phone holder at left side and can be controlled using smartphone app. On the right side is slide-able cup holder. It's ears are fitted with microphones for voice recognition and security purposes. To avoid obstacles it has sensors present on all sides and on arms too. The camera fitted in eyes can be used to locate object in different areas of house/office on the phone screen. Its hand has rotational joints for flexible working and fingers are made human like for efficient performance. BROBOT can successfully be an integral part of human life in coming future.

https://www.instructables.com/contest/designforrob...

#IMadeIt

#madness

#pencil

#notebook

image823.pngcup.pngimage8079.pngroborender v51.pngroborender v54.pngspeakers.pngtv.png
0
None
LignumMori

5 months ago

I made the joiner's mallet using makendo's instructable:

https://www.instructables.com/id/Easy-wooden-mallet/

I used zebrawood and a square Gabon ebony dowel with teak oil for the head, and lacquered black palm for the handle. This is my first mallet and it was easy with makendo's design!

8340.jpeg
0
None
alamtania

6 months ago

Don't know if this counts but I'm super happy that I made it and posted it here :D

Honestly, I never thought I'll be able to do any hairstyle except ponytails and good-to-go normal braids. These hairstyles have always been a mystery to me. When you do something you never thought you would ever be able to do, that actually feeld great :D

https://www.instructables.com/id/How-to-do-a-Basic...

29404812_1834508746842106_598808811_o.jpg
0
None
Jack A Lopez

6 months ago

Alright, just to play along: I made the same thing described in this instructable,

https://www.instructables.com/id/Drawing-a-Pentago...

titled, "Drawing a Pentagon", by Netherstar.

Yeah. I know. It's one of these geometric constuctions made with compass and straight edge, so maybe you think it is too easy, but I think I did a nice job with it.

Moreover my drawing has labels (O for the center of the circle, plus other points labeled A through J) for the various points and lines that make up this construction, so I think this is an improvement over the one Netherstar made, which has no labeled points.

pentagon-contruction-imadethis.jpg
0
None
Jack A LopezJack A Lopez

Reply 6 months ago

Hey! Does anyone know how long I have to wait for a i-made-it-post to materialize on a particular instructable? The reason why I ask, is because I still do not see my i-made-it example showing up on Netherstar's instructable,

https://www.instructables.com/id/Drawing-a-Pentago...

and I am wondering: Is this because what I wrote is still being moderated, pending, like approval, from the site's censors? Or is it because the site is broken, and the comment I wrote for that got posted to the nowhere file?

If that is the case, please let me know, and I will try uploading my "i-made-it" comment as many times as I have to, for to get it to stick without falling off.

By the way, I think the full url I was looking at when I pushed the "i-made-it" button was not the straight url that ends with a slash. It was one that had a slash, then question mark, then some args. Actually it was this one,

https://www.instructables.com/id/Drawing-a-Pentago...

You cannot see it, because the editor truncated the end, but there is an arg that says, "

commentId=CL1J9ULJEST6L9K"

I mean that was the URL I was looking at, because I noticed that someone had written a cryptic, "question",

https://www.instructables.com/topics/?type=questio...

about this instructable, with that question containing only the words, "The distance"

0
None
Matlek

6 months ago

I made it!

With friends, we started playing a Harry Potter tabletop role-playing game, and my character has a wand made out of beech tree and phoenix feather core. So I went into the forest, found a beech tree, and made my own wand! I am still looking for the phoenix though...

I also made the box! And I am very happy with the result!

Here is the original instructable: https://www.instructables.com/id/Wand-and-Wand-Box/

wand1.jpg
0
None
dekeros

6 months ago

I really liked the look of this guitar stand - so I had to make it. :-) Here is the Instructable I was inspired by https://www.instructables.com/id/Simple-Elegant-Gu... and my build attached below. And no - this is not made out of pallet wood this time. :-)

I allowed myself some artistic modifications :-)

20180318_160007.jpg
0
None
IgorF2

6 months ago

Great tutorial! It worked perfectly!

IMG_20180318_182230.jpg

After seeing many of Penelope Bulnick's delicious frappuccino recipes, I finally made one, with a twist! Her original recipe contains strawberries, but I used raspberries instead. It tasted great!

Raspberry_pie_frappuccino.png
0
None
skoo

6 months ago

After several attempts, I made to plant this pea plant. At first I soak the seed in the water until it sprouted after three days I dig a hole in the soil and I put the seed. After few days it grows like this so I Made It! and I'm so happy.

20180317_170042.jpg
0
None
chienline

6 months ago

The simplest project ever. I made two of this for my sons using popsicle sticks because metal will be hard to shape and kids were standing by my side. I got them to prepare the bolts-nuts and to blend the epoxy glue. I also add propellers stabbed into the center electrode. Technically they are spinnable but stuck at the side electrode :D

NO-WELD SPARK PLUG AEROPLANE by timdekker1825

20180314_172227.jpg
0
None
icengiceng

Reply 6 months ago

Cannot add a pic

0
None
Artuinoiceng

Reply 6 months ago

try logging in using your smart phone..I've got same issue using a desktop computer.

0
None
icengArtuino

Reply 6 months ago

Your very kind.. I've been a member since 2006 and have had 4 smart phones that lost me my password and same with Facebook... I can just lump it :-/

Best regards,

0
None
Eric T

6 months ago

I made it. A forged knife, a free standing pile of hedge posts (osage orange), forged decoritave iron knot,

20180224_130312_HDR.jpg20180313_190112_HDR.jpg20180205_200752_HDR.jpg20180209_072540_HDR.jpg
0
None
randofoEric T

Reply 6 months ago

Do you have a link to the project that you are remaking?

If this happens to be a new project, I highly encourage you to try posting a new Instructable.

0
None
Eric T

6 months ago

I made it: A forged camping tripod.see prevous poasted picture.

0
None
random_builder

6 months ago

On any ible?? YASSS!! I had a project that I wanted to do an "I made it" on, but I never got around to it.

0
None
Matlek

6 months ago

That's great! I'll be back soon with an "I made it" comment then!

0
None
chienline

6 months ago

This is Awesome! Yes, seldom that people use this awesome feature on Instructables. It is time to show off :D

0
None
mjrovai

6 months ago

Hope you also include the makers that create the Instructables! ;-)

0
None
randofomjrovai

Reply 6 months ago

It is open to anyone who wants to try to remake someone else's project.

Perhaps you could swap with someone. You could try making one of theirs, and they can make one of yours.

There will surely be other opportunities on the site for authors to win notebooks.

0
None
Kiteman

6 months ago

Awesome!