875Views211Replies

Author Options:

Random Knex Challenge 2- Power tools! WINNER ANNOUNCED! Answered

Hey guys! Im back with a new challenge: A Knex Power Tool.

 

 HEY GUYS, I HAVE ANALYSED ALL OF THE ENTRIES MADE, BUT I HAVE COME TO ONE DECISION, COMPARED TO THE OTHERS THIS WON BY FAR, BUT WITHOUT FURTHER ADO, THE WINNER!-


Shadowman39!
Hmm.. lets post a list of the winners in order...
  1. Shadowman39's saw
  2. Knex_builder_freak's saw
  3. kNeXFreek's circular saw
  4. Knex_builder_freak's sander
  5. kNeXFreek's drill
  6. kNeXFreek's jigsaw
  7. Bigdylan91's hack saw
  8. Sprout-less' dremel

The prize for this challenge is:
A patch! WOO!
5* on all of your ibles
Faving all ibles
Subscribe to you!

So, in this challenge you have to create a power tool out of knex. Now your model doesnt have to have a motor, and it doesnt have to really work (I mean like cut wood, ect.). The tool can be powered by a motor or it can be hand cranked. Here are some rules to help!
 
  • Must be 100% Knex (A bit of tape + string is also allowed)
  • You can use a motor or a hand crank
  • The tool you make can include things like: A drill, a jigsaw, a circular blade, a chainsaw, ect.
  • It must be shown by a forum topic, or in a comment.
  • More than 1 entry is allowed
  • Must be entered before 5th December
Entrants:
  • Lowney
  • Killer~SafeCracker
  • kNeXFreek
  • Bigdylan91
  • Shadowman39
  • Smilee
  • Lioneatr
  • Knex_builder_freak
  • Shadowninja31
  • Knex-lover
  • Sprout-less
Good luck!

Discussions

0
user
Lowney

8 years ago

Wow incredible, fully deserved victory!

I can't decide whether to post a forum topic or a slide show of my tool. :-P

here is a model i made of my dads 12v dewalt drill. i know it is bad but i made it in like 10 minutes! lol i was seriously just pretty much throwing pieces together! well here it is, i am entering this in the contest as a second power tool. the middle actally spins and you can stick a knex rod in the front and it will spin. right now my one crappy motor is in my saw, so for now  i have to hand turn it. it doesnt look like it but the "battery" in the knex model is attached very well. so yea hope you like my 10 minute drill :)

stuff 014.JPGstuff 019.JPG

 Thanks!!! Omg you are not a knexer!!! Double thanks!!! :)

Well I respect good work in any medium. I would be a k'nexer, but I'm a  legoer.

 hiyaudez??? did you see this? you left no comment :(

That's actually pretty good! Nice job!
I need some ideas..... Hmmmmm.
*"OOOOOOOOOOOOOOOOOOHHHHHHHHH, I KNOW!!!!!11111"*

 hmmmm.... what is yo idea?

Nuttin. I just hope I get it done before the end.

Nah, I don't particularly care about winning. It'll be a while, if at all. Sorry.

Post the drill after the contest!

 you sure? it is kinda a waste of yellow connectors.... and it uses a broken piece (a broken purple connector, the one that makes half a 3d sphere)

Looks just like the real thing! I hope mine looks realistic :-P.

hey dude you should add a motor and make a vid of it working

Hmm... nice. Looks very realistic. Added above

/\
/\
/\
/\
/\

here is my jigsaw. a will make a vid soon. this is a working jigsaw and can cut through paper. it uses only knex, and is powered by a crank. if you want a motor can easily be mounted on the side. it is extremely sturdy and the handle is comy. well here is my 3rd entry:

knex jig saw 024.JPGknex jig saw 025.JPGknex jig saw 027.JPGknex jig saw 030.JPGknex jig saw 028.JPGknex jig saw 031.JPG

I'm done... It's just cluttering up the board LoL..

lolz if you want it that bad ill post the mech for you

i just need picture with the side panel off and ill be able to make it. is it very fast?

no but its strong, if you want fast i will make a weak fast one