Transformer Technicalities? Answered
Hey guys I need some help from the experts. I am building the microwave transformer ark welder instructable. I have acquired my microwave transformer, and rewound the secondarys. Now here's where it get interesting. I stay in South Africa, and we have 220v, 15amps coming out of the wall. So I figured with so much wall power I probably only need one transformer, cos I already have too many amps (on paper). So from what I understand, I will be putting 3300watts(220v*15Amps) into this transformer. Another interesting detail is that I think my transformer has 200 turns! I put 16 turns on the secondary (although there is space for more, I just don't have a piece of wire long enough). Which means that my out put voltage will be 17.6v, and 187Amps! Ahhhhhh!!!! If I wind a few more turns on the secondary, I could probably squeeze 25 on there, that will bring my output voltage to 27.5v and 120 amps. Which seems like quite a lot? So here's my question: Will this work? If not, and things go bad, what will happen? Is there any chance that the primary coils will melt, or is it only the secondarys that will do that? I don't really want to destroy my transformer, because they are really hard to get here. South Africans won't give you snow in winter. I had to buy a broken microwave! One idea I had: I have a single coil wrapped around a plate iron core, it looks just like a transformer but with only one set of windings. The thing is as big as the microwave transformer, its wire is of a slightly thicker gauge, and it probably has about 600 turns on it (it belonged to a florescent light setup). I thought I could connect this up to the secondary winding, maybe it will bring the amps down, and also serve as an inductor/ark stabilizer. But I'm just guessing, I'm a complete noob to electronics!?