14525Views6Replies

Author Options:

Whats the best way to cover up exposed screws? Answered

I read somewhere that using vacuum plugs would work. But I don't have any of them. So what would you do?

Discussions

0
None
Burf

Best Answer 6 years ago

Depending on what the project is, I'd either countersink the screw and fill the hole with a wooden dowel. Otherwise, I would use snap cap screw buttons like in the picture.

screw buttons.jpg
0
None
powerman666Burf

Answer 6 years ago

Hey great!. I actually meant how to cover the sharp side that is poking out. Your comment made me think though I could use another small piece of wood so the sharp end goes into it and not all the way through. This project I am working on I will have my hands inside of alot so I want the nice and covered so I don't get hurt.

0
None
mpilchfamilypowerman666

Answer 6 years ago

If the screws are pocking out the other end you need to use shorter screws. If they are only poking out a little then file the tips down before you screw them in. As always pre-drill the screw hole so you don't split the wood and it won't matter if the screw has a pointy tip or not.

0
None
rickharrispowerman666

Answer 6 years ago

File the ends of the screws off - because they are pointed this only takes a few strokes of a file

Or

if you are power crazed a dremmel does the job just as well.

0
None
PearlG7

8 months ago

use hot glue

0
None
Jayefuu

6 years ago

Shorter screws?