50669Views24Replies

Author Options:

converting a bike to a trike? Answered

anyone have info on converting a bike to a trike? My disabled son has balance issues but wants to ride with the family, however we can't afford a new adult tricycle or one of the expensive conversion kits. He's much too large for training wheels to work. I'm hoping to find a way to convert an old bike with minimal expense and no welding.

Discussions

0
None
aguanile

10 years ago

The system bump me out after i wrote a lot of helpful info,but if you serious above it send me a message.I got a lot of info to share,because i am working on similar project and took some research to do. Parts, diagrams etc.

0
None
SamanthaBarrisaguanile

Reply 1 year ago

please could you email me any info or plans. sambar@lantic.net

I need to convert my son's bicycle into a tricycle. He will be 10 and has Down syndrome. We have a bicycle and would like to use the wheels from his old bicycle if possible to keep cost as low as possible.

We are in South Africa ?

0
None
valraguanile

Reply 9 years ago

I still haven't found a solution, but we were talking the other day and he said he'd like a bike with a side car, so we might try to do something like that. He now would need an adult size bike as he is a large 11 year old. (5'5" and about 170 lbs)

0
None
TomaN

10 years ago

Valr, have you find out a cheaper solution ?. I'm in a similar condition !!!

0
None
valrTomaN

Reply 9 years ago

I still haven't found a solution, but we were talking the other day and he said he'd like a bike with a side car, so we might try to do something like that. He now would need an adult size bike as he is a large 11 year old. (5'5" and about 170 lbs)

0
None
upnsmokesvalr

Reply 6 years ago

As a hobby I build bikes and a kit you can buy on ebay is the easist solution

102_0699.JPG102_0703.JPGIMAG0164.jpg
0
None
GerardH13upnsmokes

Reply 1 year ago

Hi could you send me a recent link please for the kit. Thanks G

0
None
TomT8

3 years ago

I use Recumbant Trikes

IMG_0061.JPG
0
None
callmecyril

5 years ago

http://www.youtube.com/watch?v=No8P_tnuFSs

0
None
desya

7 years ago

ebay has the a conversion kit...
http://cgi.ebay.com/24-Adult-Bicycle-Bike-Tricycle-Trike-Conversion-6BK-/170613810443?pt=Cycling_Parts_Accessories&hash=item27b960250b#ht_1603wt_944

is just one I have seen

0
None
Hubiewan

8 years ago

Please contact me. I may be of some help.

0
None
ghostrider1

9 years ago

check internet theres always plan there you must have scrap bics around and somebody with welder

0
None
Rishnai

10 years ago

Have you seen dirt bike "training wheels"? They're the most rediculous thing I've ever seen for learning to ride a motorcycle the right way, but they'd be beefy enough to work on your son's bicycle. And it would ba a bolt-on deal, but I'm not sure about how much they cost. I wouldn't be suprised if parents of little budding dirtbikers want to get rid of some cheap, though.

0
None
kishida

10 years ago

Adding a 2nd wheel to the front will cause steering difficulties, unless the 2 wheels articulate like a car's front wheels (each steering independently and in parallel). Training wheels or training wheels that are beefed up might be an easier and safer solution.

0
None
coatesy900

10 years ago

The sensible person would buy some STABILISERS. They are hardly expensive, and easy to fit so you don't have to do any hard work. Seems pretty obvious to me...

0
None
killerjackalopecoatesy900

Reply 10 years ago

Most stabilisers are very flimsy and also not very well made, one corner too quick and they snap...

0
None
valr

10 years ago

Thanks everyone! The 2nd wheel in front idea sounds interesting, then I wouldn't have to mess with the chain setup. I'll let you know if I can make it work.

0
None
killerjackalopevalr

Reply 10 years ago

If you need a hand figuring out give me a shout, depending on his balance problems you could have wheels twinned directly together in widened forks, obivously just spitballing but I'd say a trike that's closer to a bike would help with his balance issues a great deal...

0
None
killerjackalope

10 years ago

Either way it wouldn't be too hard, the front one would probably be better all round it would give insane steering capabilities and alot of fun, especially if you have suspension forks, if not back suspension, one or the other, because I'd say the trike might be a bit bumpier than a bike.

0
None
Weissensteinburg

10 years ago

Seems like you should be able to bolt on a piece of bent steel with a wheel on the edge to the existing wheel.

0
None
jtobako

10 years ago

The 'no welding' makes it difficult, but it depends on what you are up to. You might want to think about two wheels in the front with a single driving wheel in the back. Two additional forks in the front with a steering link to the original fork could work, finding forks that have the bolt-hole for a front brake would make the steering link easier to create. Do you just need an idea or something closer to step-by-step instructions?

0
None
sugg22

10 years ago

try one of the easy recumbent bike mods on this site, and then add a 3rd and 4th wheel in the back for stability.

0
None
valr

10 years ago

Homemade pedal go cart plans would work too.