100Views9Replies

Author Options:

help making a amplfyer? Answered

I was going to build a amplfyer from this instructable but had no BC548 or 2N3904 transistors. I did a google search to find out what could also work. I found a website stating simmalar transistors. On this website, at the related transistors section it states a few simmalar transistors. What transistors could I use instead of the BC548 or the 2N3904?

Discussions

0
None
lemonie

Best Answer 7 years ago


What transistors do you have then?

L

0
None
David97lemonie

Answer 7 years ago

I have a few but dont have any BC548 or 2N3904. I usaly scanvange them off old eletronics. So having a list of what would work would help. I will check what I have in the list tomorow.

0
None
lemonieDavid97

Answer 7 years ago


Spot the ones you have most of, they'll probably be "general purpose" NPN, and after that PNP.

L

0
None
David97lemonie

Answer 7 years ago

So your saying that most NPN transistors will work?

0
None
andy70707David97

Answer 7 years ago

Yes, most transistors will work, as long as they are general purpose and the same type (NPN or PNP). Make sure it isn't a power transistor ot a high frequency one or something. Also, I would recommend getting some 2N3904s, BC548, and BFY51, they are very common, useful transistors (especially the 2N3904). However, assuming the hFE is the same or higher, it should work fine.

0
None
lemonie

7 years ago


Thanks for the best answer.
If you strip e.g. a stereo system and you've got at least 4 of the same, you'll find they are "general" and useful for lots of things, cheap-o general transistors.
If you want to shift a lot of power you'll find that audio amplifiers tend to be single-package ICs, but an old TV is usually quite good for heat-sunk transistors and similar.

L

0
None
David97lemonie

Answer 7 years ago

I will remeber that... Just got a new tv but threw out the old one.......opps

0
None
steveastrouk

7 years ago

Yes, substituting transistors for simple projects is pretty easy.

Look at the maximum collector current and use a transistor that can handle the same or more - usually for high power switching projects.

Look particularly in audio projects for "Hfe", the gain - higher is better. Look at the MINIMUM Hfe, and make sure THAT is at least as high as the minimum Hfe for the original transistor.

Also check that VceMax is higher or equal to the original transistor

Substitution isn't always that simple though.

Steve

0
None
David97steveastrouk

Answer 7 years ago

My dad works on heat pumps so I can ask him to pull a few old boards out of the skip (thats where our heat pump came from, LOL). I think it shouldn't be to hard to find the right transistor.