Introduction: LEGO Support for Mobile

By
About: the art of mastering useless things, that I dominate. I love building things when I think of something I want to do. I do many things LEGO. I'm not the best to create but I'm good.

make a safe support for your mobile with pieces of LEGO Technic

Step 1: Parts

4 TECHNIC 11M BEAM
4 1/2 BUSH
3 BUSH FOR CROSS AXLE
2 CONNECTOR PEG W. FRICTION
4 CONNECTOR PEG/CROSS AXLE
1 CROSS AXLE 5M
2 CROSS AXLE 8M
2 TECHNIC ANG. BEAM 4X2 ° 90 °.
8 CONNECTOR PEG W. FRICTION 3M
3 TECHNIC ANG. BEAM 3X5 90 ° . black
2 TECHNIC ANG. BEAM 3X5 90 ° . blue
4 CROSS BLOCK 3M

Step 2: Step 1

start putting the piece CONNECTOR PEG W. FRICTION 3M in the second hole part TECHNIC 11M BEAM as pictured

Step 3: Step 2

Now place the part TECHNIC ANG. BEAM 3X5 90 °. blue in the set as shown in photo

Step 4: Step 3

Now place the piece in the set TECHNIC 11M BEAM as shown in photo

Step 5: Step 4

Now place the part CONNECTOR PEG W. 3M FRICTION in the set as shown in photo

Step 6: Step 5

Now place the part in CROSS AXLE 5M together as shown in photo

Step 7: Step 6

add the part TECHNIC ANG. BEAM 4X2 ° 90 °. as shown in photo

Step 8: Step 7

add the part CONNECTOR PEG W. FRICTION as shown in photo

Step 9: Step 8

add the part TECHNIC ANG. BEAM 3X5 90 °. black as shown in photo

Step 10: Step 9

add the part CONNECTOR PEG W. 3M FRICTION as shown in photo

Step 11: Step 10

add the part TECHNIC 11M BEAM as shown in photo

Step 12: Step 11

add the part TECHNIC ANG. BEAM 4X2 ° 90 ° as shown in photo

Step 13: Step 12

add the part CONNECTOR PEG W. FRICTION as shown in photo

Step 14: Step 13

add the part TECHNIC ANG. BEAM 3X5 90 °. blue as shown in photo

Step 15: Step 14

add the part CONNECTOR PEG W. 3M FRICTION as shown in photo

Step 16: Step 15

add the part TECHNIC 11M BEAM as shown in photo

Step 17: Step 16

the party to make a set as shown in the picture with pieces 1/2 BUSH and CROSS AXLE 8M

Step 18: Step 17

add the combination of the previous step  as shown in the image

Step 19: Step 18

add in the set piece 1/2 Bush as shown in the picture

Step 20: Step 19

repeat step 16 and insert in the set plus 3 pieces BUSH FOR CROSS AXLE as shown in the picture

Step 21: Step 20

add the part 1/2 Bush as shown in the image

Step 22: Step 21

the party to make the "arms" of the structure. start with the part CROSS BLOCK 3M as shown in photo

Step 23: Step 22

Now add the two parts CONNECTOR PEG W. 3M FRICTION as shown in the picture

Step 24: Step 23

in this step you must place the piece TECHNIC ANG. BEAM 3X5 90 °. black as shown in image

Step 25: Step 24

Now place the part CROSS BLOCK 3M in set as shown

Step 26: Step 25

Now place 2 pieces CONNECTOR PEG / CROSS AXLE like the image

Step 27: Step 26

repeat the assembly of in the 5 steps above and enter in the construction and finished project