Introduction: 3D Printed Rainbow Flashlight!

Picture of 3D Printed Rainbow Flashlight!

You can 3D print and make your own Rainbow flashlight! Have you ever wondered what that would look like?

Step 1: Make the Circuit Part of the Flashlight for It to Work

Picture of Make the Circuit Part of the Flashlight for It to Work
  1. You can use this instructable and follow the instructions
  2. After assembling the circuit you can place the STL files in Fusion 360 and edit them according to your materials, circuit and etc.
  3. Make sure you have access to a 3-D printer

Step 2: If You Have Access to a 3D Printer

Download and 3D print the files, make sure to use supports for all of them and make sure that the infill is at least 30%

Comments

kavi_arasan (author)2017-01-18

Looks nice

mirnakamel (author)kavi_arasan2017-01-21

thank you :)

About This Instructable

97views

1favorite

License:

More by mirnakamel:3D printed dog puzzle3D Printed Mettaton ex3D Printed Rainbow Flashlight!
Add instructable to: