Introduction: A Wooden Bookmark

In case you haven't noticed by watching my videos i hate wasting "scrap"

While making another project i was left with a small strip of scrap and decided i would turn it into a bookmark.

Really quick and easy took about 1 hour including finishing.

I hope you enjoy!

Please leave a like, share & comment. And subscribe for more like this!

Watch my builds - https://www.youtube.com/channel/UCRMjvilGRdZxHqr34QKzB_Q

Follow my work on instagram - https://www.instagram.com/ggwoodproje...

Help me make more projects- https://www.patreon.com/GGWoodwork

OR One time tip - https://www.paypal.me/GGwoodwork

Thanks

GG

Step 1: Plane

I took a thin smallish scrap of wood and planned it down thin and flat.

It ended up about 2mm thick

Step 2: Carving

I added a simple letter carving to it to make it more interesting than just plain.

I was just very careful not to go down to deep.

Step 3: Sand

I sanded from 320 to 1,200 to get a glass like finish,

Added 3 coats of spray lacquer to it sanding at 1,200 in between coats.

Step 4: Thats It, Job Done

I hope you enjoy!

Please leave a like, share & comment. And subscribe for more like this!

Watch my builds - https://www.youtube.com/channel/UCRMjvilGRdZxHqr3...

Follow my work on instagram - https://www.instagram.com/ggwoodprojects/

Help me make more projects- https://www.patreon.com/GGWoodwork

OR

One time tip - https://www.paypal.me/GGwoodwork

Thanks

GG

Comments

About This Instructable

49views

3favorites

License:

Bio: I hope i can show you that you really dont need to be a master craftsman to create and build great projects, and hopefully inspire ... More »
More by GG Wood Work:Wooden Jewelry DisplayLog Bark LampSkull 3 in 1
Add instructable to: