Introduction: Bike Working Stand - Bangladesh
A good bike work stand makes cleaning, maintaining, and repairing your bike exponentially easier. Commercial models start at about $150 (around 12,000 BDT) and a really good one can be as much as $275 (around 20,000 BDT). But if I can make this within less than $15(around 1300 BDT), what do you say…!
Step 1: Tools
1. 1mm screw (+) driver
2. Hand saw
3. Wrench
4. Tape measure
5. Pencil
6. Gloves
7. Safety glasses
Step 2: Parts
1. Two 1.25″ x 20″ pipes (threaded ends)
2. Two 1.25″ x 17″ pipes (threaded ends)
3. One 1.25″ x 10″ pipe (threaded ends)
4. Two 1.25″ 90° elbows
5. Three 1.25″ 180° joiner
6. One 6 inchs x 5 inchs x1mm iron plate
7. One 24″ x 24″ x 3/4″ plywood square
8. Two 1/4″ x 2″ hex bolts
9. Two 1/4″ hex nuts
10. Four 1/4″ washers
Step 3: Assembly Instructions
Step 4: Stand With the My Bike
Participated in the
Instructables Design Competition