Introduction: CNC Machine With Camera and LED Backlight

Bill of material:


Electronic parts:

1pcs Power Supply 24V 15A 360W 25,68€

1pcs 5Axis CNC Interface Adapter Breakout Board For Stepper Motor Driver 8,14€

3pcs TB6600 steper motor driver controller 23,72€

3pcs Stepper motor 1,8° 86,01€/set

1pcs Emergency Stop Push Button Switch AC 660v 10A 4,64€

1pcs wireless black controller gaming USB receiver adapter for xbox 360 6,12€

1pcs HD 720p Brand USB endoscope borescope snake scope wire camera 14,59€

2pcs 72 led flexible strip led 30cm 9€

1pcs mini wireless RF LED controller for led strip light 2,13€

The total price of the electronic part 180€ (205 USD)

Mechanical parts:

2pcs SBR16-300mm rails

2pcs SBR 16-600mm rails

2pcs SBR 16 -1000 mm rails

12pcs SBR16UU blocks

3sets BK12/BF12 with locknuts and circlips

3pcs DSG16H nut housing/bracket

3pcs D25-L30-6.35*10mm coupling

2meter Energy chain for cnc machine 17,32€

The total price of the mechanical part 420€ (478 USD)


STEP1: Mechanical part CNC

STEP2: Electronic part CNC

STEP3: Motor tuning

STEP4: Mach3 setup


Step 1: Mechanical Part CNC

Picture of Mechanical Part CNC

Step 2: Electronic Part CNC

Picture of Electronic Part CNC

Step 3: Motor Tuning

Picture of Motor Tuning

Step 4: Mach 3 Setup

Picture of Mach 3 Setup

Comments

IzakT (author)2016-04-03

Sleek design. I notice you are using a Makita router. Which model? I am having a hard time sourcing the popular Dewalt DWP611 locally and Makita may be easier to source.

MartinD69 (author)IzakT2016-04-03

I am using Makita 3710 and I am satisfied with it.

Esmail Bauomy (author)MartinD692017-04-13

Makita 3710 working with Aluminum?

DamonD2 (author)MartinD692016-06-21

One of the best DIY CNC I ever seen. I really like your design and I'm considering building one. can you please share the frame schematic as well as the material you use to build it. thank you

DorisC28 (author)DamonD22016-11-27

We are specialized in linear rails for CNC machine, welcome to your enquiry. For more information, please visit www.ccmrails.com

IzakT (author)MartinD692016-04-03

Thanks for the info. Seems that specific model is also not available locally but they do have the RT0700C 710Watt model as a viable option. 

Now to start putting the shopping list together :)

DorisC28 (author)2016-11-27

We are specialized in linear rails for CNC machine, welcome to your enquiry. For more information, please visit www.ccmrails.com

DorisC28 (author)2016-11-27

We are specialized in linear rails for CNC machine, welcome to your enquiry. For more information, please visit www.ccmrails.com

badhat70 (author)2016-11-26

What CNC software did you use with your build?

TheThinker (author)2016-04-02

Elegant design! I'm considering building one. What would you have done differently if you were to build it again?

MartinD69 (author)TheThinker2016-04-03

I am thinking about linear encoder to get a feedback for movement to increase precision.

tomatoskins (author)2016-04-01

Very cool CNC!

About This Instructable

9,840views

117favorites

License:

More by MartinD69:
Add instructable to: