Step 2: Plans

These are the plans that I was working off of when I made this project.  They are mostly correct.  Do what I say in the instructable.  Not the plans.
As we covered the runway debut of the <a href="http://www.chanels.cc/" rel="nofollow"><b>Chanel Handbags</b></a> Summer 2010, reviews were mixed by various of people. My favorite is the watercolored Classic Chanel Flap Bag, which looks utterly elegant with a variety of summer wardrobe options. As for the <a href="http://www.chanels.cc/chanel-accessories-c-115.html" rel="nofollow"><b>Chanel Purses</b></a> that dot the collection, they&rsquo;re very taste-specific, but I could see some of the more subdued version working quite well with summery white linen or various bright colors for contrast. From <a href="http://www.chanels.cc/" rel="nofollow"><b>Chanel Outlet</b></a>.
As summer comes, I think that you may do not want to wear <a href="http://www.ugglinks.com/" rel="nofollow"><b>UGG Boots</b></a>. It is said that if you want to put your ugg boots up, you had better place a support plate into the <b><a href="http://www.ugglinks.com/ugg-bailey-button-c-66.html" rel="nofollow">UGG Classic Boots</a></b>, if not, you may also use newspaper. The general newspaper is the best choice. When you use it, you can feel that it can help you avoid moisture and odor. You don&rsquo;t need to fill up, you just need to hold up slightly and to leave gaps. From <a href="http://www.ugglinks.com/" rel="nofollow"><b>UGG Boots Outlet</b></a>.
I have found the best way to cut glass is with a diamond cutting wheel for a dremel tool. http://www.coroflot.com/public/individual_file.asp?from_url=true&amp;portfolio_id=1321221&amp;individual_id=180478 <br /> (Second best, nichrome wire heating)&nbsp; Score the bottle as you would and, under a trickle of water, make several passes around that line until the cut is complete. Water is messy and electrically dangerous but it quells the glass dust and keeps the cut cool. This method has opened my possible materials to everything from projection tv CRT's to large HID bulbs for my lamp making.<br />
I think I'm going to check that out...have you ever done Nichrome wire heating?<br />
I did after I researched how CRTs are recycled. Hot wire glass cutting is really good for oddly shaped cuts and works the best out of all thermal-shock methods but still leaves a jagged edge. It's a little bit more involved than the candle method but basically you're heating up a wire to 1200+ deg F within a few seconds on a very isolated area. Check out the nichrome wire article on wikipedia for the approximate amps needed per wire size and temperature required.&nbsp; &nbsp; <br />
Thanks alot man...those bottles have no straight sides at all.&nbsp; My usually clamp and glass cutter method didn't work all that well.&nbsp; Nicrome Wire sounds like a pretty good way to do it.<br />
There are also several videos on youtube that show how to tie a string soaked in lighter fluid,it also works well for bottles
I've tried that before.&nbsp; I can't get it to work.&nbsp; The diamond cutting wheel sounds pretty promising to me<br />
Dear 3036 People,<br /> <br /> Thanks for liking my instruct able.&nbsp; I worked a long time on it.<br /> <br /> I still have plans to make it better.<br /> <br /> - The bottles are are not cut well enough.&nbsp; I'm going to get some wine bottles and cut them appropriately<br /> - There is a structural problem with the box connection.&nbsp; I need to strengthen that connection with copper pipe.&nbsp; I'm not sure how<br /> - The Cadillac Hood Ornament is not connected very well.&nbsp; I need to find a better way to connect it<br /> <br /> Best,<br /> <br /> PopEye42&nbsp; <br />
One option for better connecting would be to sweat on a copper threaded male end that fits the knock outs in the box.&nbsp; Since electrical fittings and plumbing fittings share the same NPT threading patterns it should be possible to find parts that match in size.&nbsp; The only drawback to this is that&nbsp;the copper to steel connection&nbsp;might cause the dissimilar metals to corrode quickly.&nbsp; Just a thought.&nbsp; Other than that I&nbsp;like the overall look of ot.&nbsp; Good one.
That is an awesome idea.&nbsp; I think that would make the lamp much more sturdy<br />
&nbsp;The Cadillac hood&nbsp;ornament&nbsp;looks tacky. Personally, I would leave it off. It looks much better without it.
Dear Everybody,<br /> <br /> Thanks for your comments.&nbsp; I do know that this project is a little dangerous right now.&nbsp; I know the electrical work is done wrong...however, I did this in 8 hours and over Easter I'm going to re-do the wiring.<br /> <br /> Best,<br /> <br /> PopEye42<br />
&nbsp;super wonderful, bro! nice creativity! i haven't even delved into the mechanics of it ye
&nbsp;Can I suggest something for improved electrical safety? Use a three pin plug and replace speaker wire with appliance cable that includes an earth wireand connect that with your ground wire. That creates an alternative path to earth for a fault current that isn't through the person switching it on.&nbsp;<br /> <br /> Great instrctable, I'm a sucker for making lamps.&nbsp;<br /> <br /> I love lamp.<br />
You are absolutely right on with your comment.&nbsp; PopEye42 would be much safer using a 3 wire lamp cord and bonding all of the metal parts to the grounding conductor.&nbsp; Either that or only plug it into a GFCI outlet.<br /> <br /> Regardless, it is a fantastic lamp!
Maybe &quot;Dieselpunk&quot;?:<br /> <br /> <a href="http://en.wikipedia.org/wiki/User:Piecraft/Dieselpunk" rel="nofollow">http://en.wikipedia.org/wiki/User:Piecraft/Dieselpunk</a>
&nbsp;I think that this could be Steam Punk, not aristocratic Steam punk, but&nbsp;scavenged&nbsp;together after an (air)ship wreck etc etc...
In place of the cork here I&nbsp;would perhaps have used a rubber grommet in the downtube assembly and above that, in the tube, attached a stopper of some sort, like a small clamp, to the electrical cable to prevent it from pulling out farther from the base than it should.&nbsp; That keeps it a littel bit neater, in my opinion, but otherwise, I love you writeup.&nbsp; Great project!<br />
&nbsp;Or tie a zip tie onto your cable, nice and tight so it can't fall through the corked up hole.
&nbsp;need to ground the ground to a copper pipe that GOES UNDERGROUND! not just part of the lamp! That kind of actually reverses the point of grounding. But, excellent idea, just needs some work with the actual electrical part<br /> <br />
This project requires lots of heavy duty tools, but the finished product is cool
This is a gorgeous piece of work.&nbsp; I like the pipe valve as a switch, though it could use a little more distress to match the rest of the lamp.&nbsp; The green bottle glass and copper goes together fantastically!<br />
Also, and you might have been called on this already since I haven't read all the comments, but there is no Positive and Negative in AC&nbsp;current... only Hot and Neutral.&nbsp; Hot is what carries the live voltage, and Neutral is somewhere for the voltage to go.&nbsp; <br />
Not sure I would call this dystopian.&nbsp; Dystopia, being the opposite of utopia, is a place where everything about life is horrible.&nbsp; Somalia is dystopia.&nbsp; (Sorry if I&nbsp;have offended any Somalis. Not my intention.&nbsp; The Somalis I have known are great people. The standard of living in Somalia is another thing altogether.)<br /> <br /> This project, conversely, is pretty cool.&nbsp; When I was in art school in the 80s, this was called Functional Art.&nbsp; <br /> <br /> I would love to see the wires on top made from some coiled cable, like the cord that used to connect a receiver to the rest of the telephone.&nbsp; I haven't made up my mind about the water faucet dimmer.&nbsp; One one hand, it certainly goes with the theme of the copper pipes.&nbsp; It is just not very interesting.&nbsp; I think a porcelain high voltage insulator grafted onto the dimmer shaft would look pretty cool there.<br /> <br /> I&nbsp;absolutely love the cut bottle lamp shades, the type of bulbs, and the copper tubing. Perfect.&nbsp; <br /> <br /> Maybe, it needs some interesting feet.&nbsp; The bottom of the lamp looks unfinished to me.&nbsp; You would need to dig around in the scrap bins for some kind of grommet or perhaps our resident mad-scientist taxidermist, canida, could scrounge up a set of four duck feet to glue onto it.&nbsp; Just a thought.<br />
What a cool lamp - I love it! Thanks for sharing. <br /> <br /> I also like the idea of just epoxying the pipes together to give it a cleaner look. <br /> <br /> Or, something similar could be made with EMT (electrical metallic tubing) and pray-painted any color you like.<br />
This is great just like it is. I wouldn't change a thing.&nbsp;If you have kids or plan on putting the lamp where it can be played with,&nbsp;you might think about changing the wiring. But I'd think the glass would be more of a danger.
Seriously badass!&nbsp; I have been enjoying seeing instructables for steampunk furniture, but dystopia seriously bypasses that genre for me.&nbsp; I hope more follow.&nbsp; I'm not really that creative, so seeing such an interesting design element is a real pleasure.&nbsp; Thanks<br />
&nbsp;Hello, thinks for showing us your idea.<br /> <br /> It doesn't look to&nbsp;electrically&nbsp;sound to me I would have ran to bulb wires through the pipes THHN wire is not to be exposed like that, and I would make sure the whole thing is grounded and maybe AGIF on it, but that's just me I get shocked a lot. ;)<br />
I don't think I'm quite done with this project.&nbsp; It was my origonal plan to run the wires through the pipes but it was getting late...so I just finished it.&nbsp; I&nbsp;grounded the box but not anything else.<br /> <br /> What is a THHN and AGIF?<br />
&nbsp;Hello sorry it took me time to answer, THHN is a wire type that is sold in most hardware stores. it's stamped on the wire jacket. If you check the NEC you will find it's not made for direct exposer.<br /> <br /> AGIF is a Arc-fault-ground-interrupter, it's faster then a regular GIF so if the lamp was to short it would turn off the current to the lamp, has a red reset button.<br /> <br /> Just Ideas, most lamps don't have them but most lamps don't have exposed wires. <br /> <br /> I LOVE the look, Good job on the&nbsp;brazing.&nbsp;&nbsp;<br />
Ok.&nbsp; I'll think about it.&nbsp; Finding a dimmer switch that is also AGIF is really hard to do.&nbsp; Maybe that's an internet purchase I can make.&nbsp; Idk.&nbsp; Thanks for the comment<br />
in a design aesthetic view, the wires look good like that. You could still run the wires through the pipes and put fake wires on the outside to give it the look. This would look really good on set for a movie.&nbsp;
I love to make different lamps with unusual items. This is a really cool idea. &nbsp;
That lamp is Sweet. I think I may have to try and make myself something siilar when I'm in my new place.<br /> <br /> Also, I think Post Apocalyptic should really be it's own category. It's definitely got it's own style of design.<br />
NEW&nbsp;PICTURE&nbsp;ACHIEVED!<br />
bad azz lamp and great &quot;ible&quot; for safety and ease of building though you could use epoxy to hold the pipes together, its not like it needs to be waterproof...&nbsp; I'd like to see a picture of the finished lamp under other lighting conditions so the details can be made out
The original image is big, apart from the areas in shadow you can make it out pretty well. But another shot in different light would be good.<br /> <br /> L<br />
Very nice!&nbsp; Dystopic is a great word, especially if you wear glasses ;-&gt;&nbsp;&nbsp;<small><br /> <br /> (I think &quot;dystopian&quot; is the formal term)<br /> </small><br />

About This Instructable


161 favorites


More by PopEye42: Gratitude Journal (Online) Cadillac Dystopic Lamp Hangman's Noose Pack Closure
Add instructable to: