Introduction: Cardboard Room Divider
Hello everyone!
This is my first instructable, and I would like to share it with you.
I tried to make something original and easy to make.
This project needs no special skills and costs nothing.
You can easily make this divider and decorate your room.
Step 1: What Do I Need?
Supplies:
- Pencil
- Utility knife
- Ruler
- Cardboard (4mm, 7mm)
Step 2: Transfer Design
Make templates out of paper.
Trace onto the cardboard using a pencil.
Step 3: Cut Outs
Cut out all the cardboard pieces.
For Parts A,B,C,D use 4mm cardboard, for Part E use 7mm cardboard.
Note: We need
A - 16
B- 80
C- 70
D - 64
E - 5 parts
Step 4: Connecting
Start to connect the pieces together.
Just look at the images.
Step 5: Keep Connecting
Continue connecting other parts in such manner.
Step 6: Finishing!
Connect Part E as shown below.
We need to split Part A into 2 parts.
Then connect it between parts B.
Connect all the pieces together to finish the room divider.
And finally the finished room divider!
Participated in the
MakerBot Challenge